linux ip命令启动网卡,关于linux里面命令不能启用网卡

没有看到IP地址

[root@localhost ~]# service network stop

Stopping network (via systemctl): [ 确定 ]

[root@localhost ~]# service network start

Starting network (via systemctl): [ 确定 ]

[root@localhost ~]# ip a

1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: ens33: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

link/ether 00:0c:29:7d:94:35 brd ff:ff:ff:ff:ff:ff

3: virbr0: mtu 1500 qdisc noqueue state DOWN group default qlen 1000

link/ether 52:54:00:03:28:a5 brd ff:ff:ff:ff:ff:ff

4: virbr0-nic: mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000

link/ether 52:54:00:03:28:a5 brd ff:ff:ff:ff:ff:ff

可以看到依旧没有IP地址，可能是 NetworkManager工具的影响，将其关闭

[root@localhost ~]# service NetworkManager stop

Redirecting to /bin/systemctl stop NetworkManager.service

[root@localhost ~]# service network restart

Restarting network (via systemctl): [ 确定 ]

[root@localhost ~]# ip a

1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: ens33: mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000

link/ether 00:0c:29:7d:94:35 brd ff:ff:ff:ff:ff:ff

3: virbr0: mtu 1500 qdisc noqueue state DOWN group default qlen 1000

link/ether 52:54:00:03:28:a5 brd ff:ff:ff:ff:ff:ff

4: virbr0-nic: mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000

link/ether 52:54:00:03:28:a5 brd ff:ff:ff:ff:ff:ff

关闭NetworkManager依旧没有用

查看网卡配置文件，将网卡ONBOOT改为yes,重启网卡，成功！