《电气自动化)2o15年第37卷第6期 电力 系统及其 自动· Power System & Automation 基 于 MATLAB/Simu¨nk的 IGBT导通模型研究 朱永超,赵刚 (上海交通大学 电气工程系 电力传输与功率变换控制教育部重点实验室,上海 200240) 摘 要:基于现有的 MATLAB/Simulink模型,运用 S一函数(System Function),对原 IGB F/Diode模型进行改造,设计了一种新的、更加 精确的 IGBT导通模型,有效地解决了原模型理想导通的弊端,使仿真结果更接近实际。提出了用导通电阻来模拟 IGBT导通 过程的新思路 ,触发电压的变化能够实时反映在导通电阻的变化率上,仿真结果证实了这一理论。利用 MATLAB/Simulink的 封装方法对创建了自定义的IGBT模型,设计了简单的外围电路 ,对模型进行验证 .仿真结果与原模型进行对比,效果明显。最 后,用 自定义 IGBT模型作为开关,建立了雷电流发生电路模型。搭建了硬件测试平台,仿真结果与硬件测试结果进行对比,结 果令人满意 。 关键词 :MATLAB/Simulink;IGBT;S一函数 ;导通电阻 ;自定义模型 DOI:10.3969/j.issn.1000-3886.2015.06.018 [中图分类号]TM85 [文献标志码]A [文章编号]1000—3886(2015)06—0056一o4 A Research on IGBT Turn—On Model Based on MATLAB/Simulink ZHU Yong chao.ZHAO Gang (Key Laboratory of Control of Power Transmission and Conversion of the Ministry of Education, Department ofElectrical Engineering ofShanghai Jiao Tong University,Shanghai 200240,China) Abstract:Based on the existing MATLAB/Simulink model,by using S-function(System Function)to modify the existing IGBT/Diode model, we have designed a novel,more accurate IGBT turn—on model,thus effectively overcoming the difficulty in achieving ideal conduction in the original model and making simulation results more close to actual situation.In this paper-we propose a new idea for simulating IGBT conduction process through the on—resistance,and variations of the trigger vohage can be reflected on a real—time basis in the variation rate of the on-resistance.The theory is confirmed by simulation resuhs.In the MA