linux 3.3.8,希望今天能完成linux3.3.8在OK6410上的部分移植

最新推荐文章于 2021-09-18 07:55:00 发布

玻璃樽中的长颈鹿

最新推荐文章于 2021-09-18 07:55:00 发布

阅读量182

点赞数

文章标签： linux 3.3.8

n: serial

Out: serial

Err: serial

Hit any key to stop autoboot:

NAND read: device 0 offset 0x100000, size 0x500000

5242880 bytes read: OK

Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

[ 0.000000] Booting Linux

on physical CPU 0

[ 0.000000] Initializing

cgroup subsys cpuset

[ 0.000000] Initializing

cgroup subsys cpu

[ 0.000000] Linux version

3.3.8 (root@u1104x32) (gcc version 4.2.2) #5 Tue Jul 17 17:35:08

CST 2012

[ 0.000000] CPU:

ARMv6-compatible processor [410fb766] revision 6 (ARMv7),

cr=00c5387d

[ 0.000000] CPU: PIPT /

VIPT nonaliasing data cache, VIPT nonaliasing instruction

cache

[ 0.000000] Machine:

ok6410

[ 0.000000] Memory

policy: ECC disabled, Data cache writeback

[ 0.000000] CPU S3C6410

(id 0x36410101)

[ 0.000000] S3C24XX

[ 0.000000] camera: no

parent clock specified

[ 0.000000] S3C64XX: PLL

settings, A=532000000, M=532000000, E=24000000

[ 0.000000] S3C64XX:

HCLK2=266000000, HCLK=133000000, PCLK=66500000

[ 0.000000] mout_apll:

source is fout_apll (1), rate is 532000000

[ 0.000000] mout_epll:

source is epll (1), rate is 24000000

[ 0.000000] mout_mpll:

source is mpll (1), rate is 532000000

[ 0.000000] usb-bus-host:

source is clk_48m (0), rate is 48000000

[ 0.000000] audio-bus:

source is mout_epll (0), rate is 24000000

[ 0.000000] audio-bus:

source is mout_epll (0), rate is 24000000

[ 0.000000] audio-bus:

source is mout_epll (0), rate is 24000000

[ 0.000000] irda-bus:

source is mout_epll (0), rate is 24000000

[ 0.000000] camera: no

parent clock specified

[ 0.000000] CPU: found

DTCM0 8k @ 00000000, not enabled

[ 0.000000] CPU: moved

DTCM0 8k to fffe8000, enabled

[ 0.000000] CPU: found

DTCM1 8k @ 00000000, not enabled

[ 0.000000] CPU: moved

DTCM1 8k to fffea000, enabled

[ 0.000000] CPU: found

ITCM0 8k @ 00000000, not enabled

[ 0.000000] CPU: moved

ITCM0 8k to fffe0000, enabled

[ 0.000000] CPU: found

ITCM1 8k @ 00000000, not enabled

[ 0.000000] CPU: moved

ITCM1 8k to fffe2000, enabled

[ 0.000000] Built 1

zonelists in Zone order, mobility grouping on.

Total pages: 65024

[ 0.000000] Kernel

command line: root=/dev/mtdblock2 rootfstype=cramfs

console=ttySAC0,115200

[ 0.000000] PID hash

table entries: 1024 (order: 0, 4096 bytes)

[ 0.000000] Dentry cache

hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.000000] Inode-cache

hash table entries: 16384 (order: 4, 65536 bytes)

[ 0.000000] allocated

524288 bytes of page_cgroup

[ 0.000000] please try

'cgroup_disable=memory' option if you don't want memory

cgroups

[ 0.000000] Memory: 256MB

= 256MB total

[ 0.000000] Memory:

251052k/251052k available, 11092k reserved, 0K highmem

[ 0.000000] Virtual

kernel memory layout:

[ 0.000000]

vector :

0xffff0000 - 0xffff1000 ( 4

kB)

[ 0.000000]

DTCM : 0xfffe8000 - 0xfffec000 (

16 kB)

[ 0.000000]

ITCM : 0xfffe0000 - 0xfffe4000 (

16 kB)

[ 0.000000]

fixmap :

0xfff00000 - 0xfffe0000 ( 896 kB)

[ 0.000000]

vmalloc : 0xd0800000 -

0xff000000 ( 744 MB)

[ 0.000000]

lowmem :

0xc0000000 - 0xd0000000 ( 256 MB)

[ 0.000000]

pkmap :

0xbfe00000 - 0xc0000000 ( 2

MB)

[ 0.000000]

modules : 0xbf000000 -

0xbfe00000 ( 14 MB)

[ 0.000000]

.text :

0xc0008000 - 0xc06b7c78 (6848 kB)

[ 0.000000]

.init :

0xc06b8000 - 0xc06ff000 ( 284 kB)

[ 0.000000]

.data :

0xc0700000 - 0xc0755278 ( 341 kB)

[ 0.000000]

.bss : 0xc0756024 - 0xc08122f4 ( 753 kB)

[ 0.000000] SLUB:

Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,

Nodes=1

[ 0.000000] NR_IRQS:246

nr_irqs:246 246

[ 0.000000] VIC

@f6000000: id 0x00041192, vendor 0x41

[ 0.000000] VIC

@f6010000: id 0x00041192, vendor 0x41

[ 0.000000] Console:

colour dummy device 80x30

[ 0.010000] Calibrating

delay loop... 528.79 BogoMIPS (lpj=2643968)

[ 0.060000] pid_max:

default: 32768 minimum: 301

[ 0.070000] Security

Framework initialized

[ 0.070000] AppArmor:

AppArmor initialized

[ 0.070000] Mount-cache

hash table entries: 512

[ 0.070000] Initializing

cgroup subsys cpuacct

[ 0.070000] Initializing

cgroup subsys memory

[ 0.070000] Initializing

cgroup subsys devices

[ 0.070000] Initializing

cgroup subsys freezer

[ 0.070000] Initializing

cgroup subsys net_cls

[ 0.070000] Initializing

cgroup subsys blkio

[ 0.070000] CPU: Testing

write buffer coherency: ok

[ 0.070000] ftrace:

allocating 19131 entries in 57 pages

[ 0.130000] hw

perfevents: enabled with v6 PMU driver, 3 counters available

[ 0.130000] Setting up

static identity map for 0x504b12c8 - 0x504b1324

[ 0.130000] devtmpfs:

initialized

[ 0.140000] gpiochip_add:

registered GPIOs 38 to 53 on device: GPF

[ 0.140000] gpiochip_add:

registered GPIOs 74 to 89 on device: GPI

[ 0.140000] gpiochip_add:

registered GPIOs 91 to 102 on device: GPJ

[ 0.140000] gpiochip_add:

registered GPIOs 161 to 176 on device: GPO

[ 0.140000] gpiochip_add:

registered GPIOs 178 to 192 on device: GPP

[ 0.140000] gpiochip_add:

registered GPIOs 194 to 202 on device: GPQ

[ 0.140000] gpiochip_add:

registered GPIOs 144 to 159 on device: GPN

[ 0.140000] gpiochip_add:

registered GPIOs 0 to 7 on device: GPA

[ 0.140000] gpiochip_add:

registered GPIOs 9 to 15 on device: GPB

[ 0.140000] gpiochip_add:

registered GPIOs 17 to 24 on device: GPC

[ 0.140000] gpiochip_add:

registered GPIOs 26 to 30 on device: GPD

[ 0.140000] gpiochip_add:

registered GPIOs 32 to 36 on device: GPE

[ 0.140000] gpiochip_add:

registered GPIOs 55 to 61 on device: GPG

[ 0.140000] gpiochip_add:

registered GPIOs 137 to 142 on device: GPM

[ 0.140000] gpiochip_add:

registered GPIOs 63 to 72 on device: GPH

[ 0.140000] gpiochip_add:

registered GPIOs 104 to 119 on device: GPK

[ 0.140000] gpiochip_add:

registered GPIOs 121 to 135 on device: GPL

[ 0.140000]

print_constraints: dummy:

[ 0.140000] NET:

Registered protocol family 16

[ 0.140000] ok6410:

Option string ok6410=0

[ 0.140000] ok6410:

selected LCD display is 480x272

[ 0.140000]

hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[ 0.140000]

hw-breakpoint: maximum watchpoint size is 4 bytes.

[ 0.140000] S3C6410:

Initialising architecture

[ 0.160000] bio: create

slab at 0

[ 0.160000] SCSI

subsystem initialized

[ 0.160000] usbcore:

registered new interface driver usbfs

[ 0.160000] usbcore:

registered new interface driver hub

[ 0.160000] usbcore:

registered new device driver usb

[ 0.160000] NetLabel:

Initializing

[ 0.160000] NetLabel:

domain hash size = 128

[ 0.160000] NetLabel:

protocols = UNLABELED CIPSOv4

[ 0.160000] NetLabel:

unlabeled traffic allowed by default

[ 0.200000] AppArmor:

AppArmor Filesystem Enabled

[ 0.230000] NET:

Registered protocol family 2

[ 0.230000] IP route

cache hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.230000] TCP

established hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.230000] TCP bind hash

table entries: 8192 (order: 3, 32768 bytes)

[ 0.230000] TCP: Hash

tables configured (established 8192 bind 8192)

[ 0.230000] TCP reno

registered

[ 0.230000] UDP hash

table entries: 256 (order: 0, 4096 bytes)

[ 0.230000] UDP-Lite hash

table entries: 256 (order: 0, 4096 bytes)

[ 0.230000] NET:

Registered protocol family 1

[ 0.230000] audit:

initializing netlink socket (disabled)

[ 0.230000] type=2000

audit(0.230:1): initialized

[ 0.440000] VFS: Disk

quotas dquot_6.5.2

[ 0.440000] Dquot-cache

hash table entries: 1024 (order 0, 4096 bytes)

[ 0.440000] fuse init

(API version 7.18)

[ 0.440000] msgmni has

been set to 490

[ 0.450000] Block layer

SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 0.450000] io scheduler

noop registered

[ 0.450000] io scheduler

deadline registered

[ 0.450000] io scheduler

cfq registered (default)

[ 0.450000] Serial:

8250/16550 driver, 32 ports, IRQ sharing enabled

[ 0.470000]

s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 69) is a

S3C6400/10

[ 0.480000] console

[ttySAC0] enabled

[ 0.480000]

s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 70) is a

S3C6400/10

[ 0.490000]

s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 71) is a

S3C6400/10

[ 0.500000]

s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 72) is a

S3C6400/10

[ 0.520000] brd: module

loaded

[ 0.540000] loop: module

loaded

[ 0.540000] S3C24XX NAND

[ 0.540000] s3c24xx-nand

s3c6400-nand: Tacls=4, 30ns Twrph0=8 60ns, Twrph1=6 45ns

[ 0.550000] s3c24xx-nand

s3c6400-nand: System booted from NAND

[ 0.550000] s3c24xx-nand

s3c6400-nand: NAND soft ECC

[ 0.560000] NAND device:

Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V

8-bit)

[ 0.570000] No oob scheme

defined for oobsize 218

[ 0.570000] ------------[

cut here ]------------

[ 0.570000] kernel BUG at

drivers/mtd/nand/nand_base.c:3269!

[ 0.570000] Internal

error: Oops - BUG: 0 [#1]

[ 0.570000] Modules

linked in:

[ 0.570000] CPU: 0

Not tainted

(3.3.8 #5)

[ 0.570000] PC is at

nand_scan_tail+0xc8/0x62c

[ 0.570000] LR is at

console_unlock+0x1d4/0x234

[ 0.570000] pc :

[] lr : []

psr: 60000013

[ 0.570000] sp : cf835e20

ip : c0702028 fp :

cf835e3c

[ 0.570000] r10: 00000000

r9 : c070d7f0 r8 :

c070d7e8

[ 0.570000] r7 : cf8ac040

r6 : cf949800 r5 : cf949a40

r4 : cf949a40

[ 0.570000] r3 : 1d11931a

r2 : 1d11931a r1 : 000026e4

r0 : 0000003b

[ 0.570000] Flags: nZCv

IRQs on FIQs on

Mode SVC_32 ISA ARM

Segment kernel

[ 0.570000] Control:

00c5387d Table: 50004008 DAC:

00000017

[ 0.570000] Process

swapper (pid: 1, stack limit = 0xcf834268)

[ 0.570000] Stack:

(0xcf835e20 to 0xcf836000)

[ 0.570000] 5e20:

cf949a40 cfa0d4e0 cf949800 cf8ac040 cf835e84 cf835e40 c0336148

c032f12c

[ 0.570000] 5e40:

00000000 00000000 c070d7f8 00000001 00000000 00000001 cf835e74

c070d7f0

[ 0.570000] 5e60:

c080ca44 c0740ba8 c0740ba8 cfa0d480 00000000 00000000 cf835e94

cf835e88

[ 0.570000] 5e80:

c02ca530 c0335f08 cf835eb4 cf835e98 c02c8ef0 c02ca518 c070d7f0

c070d824

[ 0.570000] 5ea0:

c0740ba8 c02c9154 cf835ed4 cf835eb8 c02c91e8 c02c8dc8 cf835ed4

00000000

[ 0.570000] 5ec0:

cf835ed8 c0740ba8 cf835efc cf835ed8 c02c7954 c02c9160 cf80f1cc

cf89fc90

[ 0.570000] 5ee0:

c060368c c06fdff8 c0740ba8 c0734248 cf835f0c cf835f00 c02c8c98

c02c7900

[ 0.570000] 5f00:

cf835f3c cf835f10 c02c887c c02c8c80 c060368c 00000000 00000000

c06fdff8

[ 0.570000] 5f20:

c0740ba8 00000013 c06d9370 cf834000 cf835f64 cf835f40 c02c9780

c02c86e8

[ 0.570000] 5f40:

cf835f64 00000000 c06fdff8 c06fe5a4 00000013 c06d9370 cf835f74

cf835f68

[ 0.570000] 5f60:

c02ca878 c02c9724 cf835f84 cf835f78 c06d938c c02ca834 cf835fd4

cf835f88

[ 0.570000] 5f80:

c0008774 c06d937c c0710eb4 00000000 c06fe5a4 00000013 00000000

00000000

[ 0.570000] 5fa0:

cf835fbc cf835fb0 c0040a28 c06fe45c c06fdff8 c06fe5a4 00000013

00000000

[ 0.570000] 5fc0:

00000000 00000000 cf835ff4 cf835fd8 c06b8600 c0008658 00000000

00000000

[ 0.570000] 5fe0:

c06b8550 c0009f70 00000000 cf835ff8 c0009f70 c06b855c ffffffff

ffffffff

[ 0.570000]

[]

(nand_scan_tail+0xc8/0x62c) from

[]

(s3c24xx_nand_probe+0x24c/0x508)

[ 0.570000]

[]

(s3c24xx_nand_probe+0x24c/0x508) from

[]

(platform_drv_probe+0x24/0x28)

[ 0.570000]

[]

(platform_drv_probe+0x24/0x28) from

[]

(driver_probe_device+0x134/0x1b4)

[ 0.570000]

[]

(driver_probe_device+0x134/0x1b4) from

[]

(__driver_attach+0x94/0x98)

[ 0.570000]

[]

(__driver_attach+0x94/0x98) from

[]

(bus_for_each_dev+0x60/0x8c)

[ 0.570000]

[]

(bus_for_each_dev+0x60/0x8c) from

[]

(driver_attach+0x24/0x2c)

[ 0.570000]

[]

(driver_attach+0x24/0x2c) from

[]

(bus_add_driver+0x1a0/0x258)

[ 0.570000]

[]

(bus_add_driver+0x1a0/0x258) from

[]

(driver_register+0x68/0x144)

[ 0.570000]

[]

(driver_register+0x68/0x144) from

[]

(platform_driver_register+0x50/0x64)

[ 0.570000]

[]

(platform_driver_register+0x50/0x64) from

[]

(s3c2410_nand_init+0x1c/0x28)

[ 0.570000]

[]

(s3c2410_nand_init+0x1c/0x28) from

[]

(do_one_initcall+0x128/0x17c)

[ 0.570000]

[]

(do_one_initcall+0x128/0x17c) from

[]

(kernel_init+0xb0/0x15c)

[ 0.570000]

[] (kernel_init+0xb0/0x15c)

from []

(kernel_thread_exit+0x0/0x8)

[ 0.570000] Code:

e3510008 0a0000dc e59f04c4 ebf3bb35

(e7f001f2)

[ 0.580000] ---[ end

trace 8f0a1ae9dcfc695e ]---

[ 0.590000] Kernel panic

- not syncing: Attempted to kill init!

玻璃樽中的长颈鹿

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
linux 3.3.8,希望今天能完成linux3.3.8在OK6410上的部分移植

n: serialOut: serialErr: serialHit any key to stop autoboot:0NAND read: device 0 offset 0x100000, size 0x5000005242880 bytes read: OKBoot with zImageStarting kernel ...Uncompressing Linux... done, ...
复制链接

扫一扫