linux编程不同cpu有区别吗,linux – cpufreq-info与/ proc / cpuinfo不同？

我有一台服务器,我想确保它始终以最高速度运行,从不在节能模式下运行.我尝试了一些策略(除了重新启动和更改B

IOS中的设置,我必须为几百台服务器做这些)但我从cpufreq-info得到了奇怪的结果.例如.：

root@host:~# cpufreq-info -c 0

cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009

Report errors and bugs to cpufreq@vger.kernel.org,please.

analyzing cpu 0:

driver: acpi-cpufreq

cpus which run at the same hardware frequency: 0

cpus which need to have their frequency coordinated by software: 0

maximum transition latency: 10.0 us.

hardware limits: 1.20 GHz - 2.20 GHz

available frequency steps: 2.20 GHz,2.20 GHz,2.10 GHz,2.00 GHz,1.90 GHz,1.80 GHz,1.70 GHz,1.60 GHz,1.50 GHz,1.40 GHz,1.30 GHz,1.20 GHz

available cpufreq governors: conservative,ondemand,userspace,powersave,performance

current policy: frequency should be within 2.00 GHz and 2.20 GHz.

The governor "performance" may decide which speed to use

within this range.

current cpu frequency is 1.20 GHz (asserted by call to hardware).

cpufreq stats: 2.20 GHz:6.50%,2.20 GHz:0.24%,2.10 GHz:0.34%,2.00 GHz:0.05%,1.90 GHz:0.04%,1.80 GHz:0.03%,1.70 GHz:0.03%,1.60 GHz:0.03%,1.50 GHz:0.03%,1.40 GHz:0.03%,1.30 GHz:0.03%,1.20 GHz:92.66% (8080636)

请注意,最小速度显示“2.00 GHz”,调速器设置为“性能”,但当前cpu频率为1.20 GHz.但是,如果我只查看/ proc / cpuinfo,那么它的值始终为~2.2 GHz：

root@host:~# egrep 'MHz|Xeon' /proc/cpuinfo ; cpufreq-info -c 0

model name : Intel(R) Xeon(R) cpu E5-2660 0 @ 2.20GHz

cpu MHz : 2200.000

model name : Intel(R) Xeon(R) cpu E5-2660 0 @ 2.20GHz

cpu MHz : 2201.000

哪一个是正确的？我相信哪一个？除了BIOS更改之外,有什么方法可以保证最高性能模式吗？对于它的价值,这是Ubuntu 12.04,带有这个内核：

Linux host 3.2.0-76-generic #111-Ubuntu SMP Tue Jan 13 22:16:09 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux