oracle11g Rac Bond,Oracle11g搭建RAC步骤..doc

Oracle11g搭建RAC步骤.

一、网卡绑定

1、修改配置文件

/etc/modprobe.conf

alias bond0 bonding

alias bond1 bonding

/etc/sysconfig/network-scripts/ifcfg-bond0

DEVICE=bond0

BOOTPROTO=static

ONBOOT=yes

USERCTL=no

IPADDR=01

BROADCAST=55

NETWORK=

NETMASK=

TYPE=Ethernet

BONDING_OPTS="mode=1 miimon=100"

/etc/sysconfig/network-scripts/ifcfg-bond1

DEVICE=bond1

BOOTPROTO=static

ONBOOT=yes

USERCTL=no

IPADDR=01

BROADCAST=55

NETWORK=

NETMASK=

TYPE=Ethernet

BONDING_OPTS="mode=1 miimon=100"

/etc/sysconfig/network-scripts/ifcfg-eth0

# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]

DEVICE=eth0

BOOTPROTO=none

ONBOOT=yes

USERCTL=no

HWADDR=00:0c:29:9e:87:44

MASTER=bond0

SLAVE=yes

/etc/sysconfig/network-scripts/ifcfg-eth1

# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]

DEVICE=eth1

BOOTPROTO=none

ONBOOT=yes

HWADDR=00:0c:29:9e:87:4e

MASTER=bond0

SLAVE=yes

/etc/sysconfig/network-scripts/ifcfg-eth2

# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]

DEVICE=eth2

BOOTPROTO=none

ONBOOT=yes

USERCTL=no

HWADDR=00:0c:29:9e:87:58

MASTER=bond1

SLAVE=yes

/etc/sysconfig/network-scripts/ifcfg-eth3

# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]

DEVICE=eth3

BOOTPROTO=none

ONBOOT=yes

HWADDR=00:0c:29:9e:87:62

USERCTL=no

MASTER=bond1

SLAVE=yes

?

命令：

ifensalve bond0 eth0 eth1

ifensalve bond1 eth2 eth3

service network restart

?

2、检查配置

cat /proc/net/bonding/bond0

Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)

?

Bonding Mode: fault-tolerance (active-backup)

Primary Slave: None

Currently Active Slave: eth0

MII Status: up

MII Polling Interval (ms): 100

Up Delay (ms): 0

Down Delay (ms): 0

?

Slave Interface: eth0

MII Status: up

Link Failure Count: 0

Permanent HW addr: 00:0c:29:9e:87:44

Slave queue ID: 0

?

Slave Interface: eth1

MII Status: up

Link Failure Count: 0

Permanent HW addr: 00:0c:29:9e:87:4e

Slave queue ID: 0

?

cat /proc/net/bonding/bond1

Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)

?

Bonding Mode: fault-tolerance (active-backup)

Primary Slave: None

Currently Active Slave: eth2

MII Status: up

MII