T. Shibahara, 'Edger set-up model at roughing train in hot strip mill,' ISIJ, vol. 67, no. 15, pp. 2509-2515, 1981
T. Sasaki, 'Mathematical model of width change in the hot strip finishing train,' CAMPISIJ, vol. 9, pp. 304-307, 1996
K. Yamada, S. Ogawa, and M. Ataka, 'Three dimensional analysis of at rolling using rigid-plastic finite element method coupled with roll deformation analysis,' NUMIFORM92, pp. 755-760, 1992
lsii, 'Analysis of width deviation for hot strip finishing mill,' Japan Society for Technology of Plasticity, pp. 219-222, 1992
C. J. Park and D. M. Lee, 'Input selection technology of neural network and its application for hot strip mill,' IFAC World Congress, 2005
A. Hacquin and P. Montmitonnet, 'Coupling of roll and strip deformation in three-dimensional simulation of hot rolling,' Simulation of Mat. Proc., pp. 921-927, 1995
A. Helmi and J. Alexander, 'Geometric factors affecting spread in hot at rolling of steel,' JISI, no. 206, pp. 1110-1117, 1968
A. Ishii, 'Variation of strip width during hot finishing rolling,' CAMP-ISIJ, vol. 9, pp. 300-303, 1996
J. Price, 'The hot strip mill looper system,' IEEE Transactions on Industry Applications, vol. IA-9, no. 5, pp. 556-562, 1973
https://doi.org/10.1109/TIA.1973.349940
A. Mizuta, H. Ibata, Y. Yamamoto, S. Saito, S. Honda, and M. Kitamura, 'Control method and its performance,' Transactions of the Iron and Steel Institute of Japan, vol. 26, p. B21, 1986
D. A. Davies, 'Application of hydraulic agc and width control to a hot strip mill,' Iron and Steel Engineer, vol. 66, no. 8, pp. 39-44,1989
Anon, 'A new roll force awc system for roughing train in hot strip mill,' Transactions of the Iron and Steel Institute of Japan, vol. 27, no. 12, p. 993, 1987
https://doi.org/10.2355/isijinternational1966.27.993
S. Nakamura, M. Takahashi, and Y. Chida, 'Slab width control for hot direct rolling,' Transactions of the Iron and Steel Institute of Japan, vol. 28, pp. 110-116, 1988
https://doi.org/10.2355/isijinternational1966.28.110
H. Yoneda, 'Development of accurate width control technology in hot strip finishing mill,' CAMP-ISIJ, vol. 9, pp. 312-315, 1996
T. Ogura, 'Advanced width control for hot finishing mill,' CAMP-lSIJ, vol. 9, p. 324, 1996
S. Murata, 'Development of width control technology in finishing line of hot strip mill,' CAMP-ISIJ, vol. 9, pp. 308-311, 1996
H. Senda, 'Development of the width control system in no.3 hot strip mill at Chiba Works,' CAMP-ISIJ, vol. 11, p. 356, 1998
T. Takahara, 'Improvement of width accuracy in Fukuyama no.1 hot strip mill,' CAMPISIJ, vol. 10, p. 391, 1997
JISF, The theory and practice of the steel rolling. JISF, 1983
S. Kunimatsu, T. Fujii, and T. Tsujino, 'Quadratic stabilization of lLQ servo systems with generalized reference inputs,' T. SICE, vol. 39, no. 3, pp. 307-309, 2003
https://doi.org/10.9746/sicetr1965.39.307
H. lmanari, Y. Morimatsu, K. Sekiguchi, H. Ezure, R. Matuoka, A. Tokuda, and H. Otobe, 'Looper H-Infinity control for hot strip mills,' IEEE Transactions on Industry Applications, vol. 33, no. 3, pp. 790-796, 1997
https://doi.org/10.1109/28.585871
J. W. Lee, W. H. Kwon, and J. H. Choi, 'On stability of constrained receding horizon control with finite terminal weighting matrix,' Automatica, vol. 34, no. 12, pp. 1607-1612, 1998
https://doi.org/10.1016/S0005-1098(98)80015-0
D. Yu, J. Gomm, and D. Williams, 'Neural model input selection for a mimo chemical process,' Engineering Applications of Artificial intelligence, vol. 13, pp. 15-23, 2000
https://doi.org/10.1016/S0952-1976(99)00046-9
W. Wu and D. Massart, 'Artificial neural networks in classification of NIR spectral data : Selection of the input,' Chemometrics and Intelligent Laboratory Systems, vol. 35, pp. 127-135,1996
https://doi.org/10.1016/S0169-7439(96)00034-2
A. Back and T. Trappenberg, 'Selecting inputs for modeling using normalized higher order statistics and independent component analysis,' IEEE Transactions on Neural Networks, vol. 12, no. 3, pp. 612-617, 2001
https://doi.org/10.1109/72.925564
C. Ledoux and J. Grandin, 'Two original weight pruning methods based on statistical tests and rounding techniques,' lEE Proc. Vision, Image Signa! Process. vol. 141, no. 4, pp. 230-236, 1994
https://doi.org/10.1049/ip-vis:19941328
R. Reed, 'Pruning algorithms: a survey,' IEEE Trans. Neural Netw. , vol. 4, no. 5, pp. 740-747, 1993
https://doi.org/10.1109/72.248452
J. Luo, B. Hu, X. Ling, and R, Liu, 'Principal independent component analysis,' IEEE Transactions on Neural Networks, voI. 10, no. 4,pp.912-917,1999
https://doi.org/10.1109/72.774259
N. Kambhatla and T. Leen, 'Dimension reduction by local principal component analysis,' Neural Comput., vol. 9, no. 7, pp. 1493-1516,1997
https://doi.org/10.1162/neco.1997.9.7.1493
S. Ross, Introduction to Probability and Statistics for Engineers and Scientists, Academic Press, 2000
S. Z. He, 'Fuzzy self-tuning of PID controller,' Fuzzv Sets and Systems, pp. 37-46,1993