linux在一个网卡上配置多个ip,Linux单网卡如何配置多个IP

1：首先 ifconfig:

[root@company network-scripts]# ifconfig

eth0      Link encap:Ethernet  HWaddr 00:0C:29:EB:26:7E

inet addr:192.168.0.223  Bcast:192.168.0.255  Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:feeb:267e/64 Scope:Link

UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

RX packets:180734 errors:91 dropped:96 overruns:0 frame:0

TX packets:1028 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:19321639 (18.4 MiB)  TX bytes:117651 (114.8 KiB)

Interrupt:19 Base address:0x2000

2:然后将cp /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth0:1

[root@company network-scripts]# cat ifcfg-eth0

DEVICE=eth0：1

NM_CONTROLLED=yes

ONBOOT=yes

IPADDR=192.168.0.223#另外一个ip地址

BOOTPROTO=none

NETMASK=255.255.255.0

TYPE=Ethernet

GATEWAY=192.168.0.9

IPV6INIT=no

USERCTL=no

DNS2=192.168.0.4

DNS1=192.168.0.9

HWADDR=00:0c:29:eb:26:7e

PREFIX=24

DEFROUTE=yes

IPV4_FAILURE_FATAL=yes

NAME="System eth0"

3：重启网络服务ifup eth0:1