ZC：另外一些信息在 “Modbus资料 - codeskill_android - 博客园.html”（https://www.cnblogs.com/codeskilla/p/9998416.html）
1、文章：modbus4j,rtu,ascii,tcp_ip传输模式 - 狂野的河 - CSDN博客.html（https://blog.csdn.net/u013150916/article/details/78065479?locationNum=9&fps=1#commentBox）
2、包：路径：“...\ZC_IDE\Java_3rd\modbus_java\02_新一点的\Mango Automation\”
JAR：主要都是来自 m2m2-modbus-1.5.4.zip 中的 lib文件夹
源码：没有去找对应版本jar的源码（也不知道能不能找到）
3、测试代码：
package com.test.modbus; import java.util.Arrays; import org.junit.Test; import com.serotonin.modbus4j.BasicProcessImage; import com.serotonin.modbus4j.BatchRead; import com.serotonin.modbus4j.BatchResults; import com.serotonin.modbus4j.ModbusFactory; import com.serotonin.modbus4j.ModbusMaster; import com.serotonin.modbus4j.ModbusSlaveSet; import com.serotonin.modbus4j.ProcessImage; import com.serotonin.modbus4j.ProcessImageListener; import com.serotonin.modbus4j.code.DataType; import com.serotonin.modbus4j.exception.ErrorResponseException; import com.serotonin.modbus4j.exception.IllegalDataAddressException; import com.serotonin.modbus4j.exception.ModbusInitException; import com.serotonin.modbus4j.exception.ModbusTransportException; import com.serotonin.modbus4j.ip.IpParameters; import com.serotonin.modbus4j.locator.BaseLocator; import com.serotonin.modbus4j.msg.ReadCoilsRequest; import com.serotonin.modbus4j.msg.ReadCoilsResponse; import com.serotonin.modbus4j.msg.ReadDiscreteInputsRequest; import com.serotonin.modbus4j.msg.ReadDiscreteInputsResponse; import com.serotonin.modbus4j.msg.ReadExceptionStatusRequest; import com.serotonin.modbus4j.msg.ReadExceptionStatusResponse; import com.serotonin.modbus4j.msg.ReadHoldingRegistersRequest; import com.serotonin.modbus4j.msg.ReadHoldingRegistersResponse; import com.serotonin.modbus4j.msg.ReadInputRegistersRequest; import com.serotonin.modbus4j.msg.ReadInputRegistersResponse; import com.serotonin.modbus4j.msg.ReportSlaveIdRequest; import com.serotonin.modbus4j.msg.ReportSlaveIdResponse; import com.serotonin.modbus4j.msg.WriteCoilRequest; import com.serotonin.modbus4j.msg.WriteCoilResponse; import com.serotonin.modbus4j.msg.WriteCoilsRequest; import com.serotonin.modbus4j.msg.WriteCoilsResponse; import com.serotonin.modbus4j.msg.WriteMaskRegisterRequest; import com.serotonin.modbus4j.msg.WriteMaskRegisterResponse; import com.serotonin.modbus4j.msg.WriteRegisterRequest; import com.serotonin.modbus4j.msg.WriteRegisterResponse; import com.serotonin.modbus4j.msg.WriteRegistersRequest; import com.serotonin.modbus4j.msg.WriteRegistersResponse; import com.serotonin.io.serial.SerialParameters; public class MasterTest { public static void main(String[] args) throws Exception { //TCP传输方式 // ModbusMaster master = getTcpMaster(); //RTU传输方式 ModbusMaster master = getRtuMaster(); //ASCII传输模式 // ModbusMaster master = getAsiiMaster(); // ModbusMaster master = modbusFactory.createUdpMaster(ipParameters); try { //初始化 //设置超时时间 master.setTimeout(500); //设置重连次数 master.setRetries(1); master.init(); //设置从站ID int slaveId = 1; //测试校验 // Timer timer = new Timer(); // timer.schedule(new TimerTask() { // // @Override // public void run() { // //RTU // ModbusMaster master = getRtuMaster(); // //ASCII ModbusMaster master = getAsiiMaster(); // try { // master.init(); // readCoilTest(master, 1, 0, 10); // } catch (ModbusInitException e) { // e.printStackTrace(); // } finally { // master.destroy(); // } // } // }, 100, 1000); //------------------读--------------- //读取开关量状态 01 // readCoilTest(master, slaveId, 0, 5); //读取外部设备输入开关量状态 02 // readDiscreteInputTest(master, slaveId, 0, 10); //读取保持寄存器数据 03 // readHoldingRegistersTest(master, slaveId, 0, 10); //读取外围设备输入的数据 04 // readInputRegistersTest(master, slaveId, 0, 10); //------------------写--------------- //开关量写单个数据 05 // writeCoilTest(master, slaveId, 9, true); //开关量写入多个数据 15 // writeCoilsTest(master, slaveId, 0, new boolean[] {true, true, true, true, true}); //写入单个模拟量数据 06 // writeRegisterTest(master, slaveId, 0, 100); //写入多个模拟量数据 16 // writeRegistersTest(master, slaveId, 0, new short[] {1, 10, 100, 1000, 10000, (short) 65534}); //批量读取 // bathRead(master, slaveId); //根据类型写 writeValue(master); //异常 // readExceptionStatusTest(master, slaveId); } finally { master.destroy(); } } /** * @Description: 根据类型写数据 * @param master * @throws ModbusTransportException * @throws ErrorResponseException */ public static void writeValue(ModbusMaster master) throws ModbusTransportException, ErrorResponseException { // BaseLocator<?> createLocator = StringLocator.createLocator(1, 1, DataType.TWO_BYTE_INT_UNSIGNED, 1, 2); // BaseLocator<Number> hr1 = BaseLocator.holdingRegister(1, 0, DataType.TWO_BYTE_INT_UNSIGNED); // BaseLocator<Number> hr1 = BaseLocator.holdingRegister(1, 0, DataType.TWO_BYTE_INT_UNSIGNED_SWAPPED); // BaseLocator<Number> hr1 = BaseLocator.holdingRegister(1, 0, DataType.TWO_BYTE_INT_UNSIGNED); // BaseLocator<Number> hr1 = BaseLocator.holdingRegister(1, 0, DataType.FOUR_BYTE_INT_UNSIGNED); //测试高低位0x12345678 // BaseLocator<Number> hr1 = BaseLocator.holdingRegister(1, 0, DataType.FOUR_BYTE_INT_UNSIGNED); // BaseLocator<Number> hr1 = BaseLocator.holdingRegister(1, 0, DataType.FOUR_BYTE_INT_UNSIGNED_SWAPPED); // BaseLocator<Number> hr1 = BaseLocator.inputRegister(1, 0, DataType.FOUR_BYTE_INT_UNSIGNED_SWAPPED); BaseLocator<Number> hr1 = BaseLocator.holdingRegister(1, 0, DataType.FOUR_BYTE_INT_UNSIGNED_SWAPPED);// ZC: 上面那样会报错，我改成的这样 // BaseLocator<Number> hr2 = BaseLocator.holdingRegister(1, 0, DataType.TWO_BYTE_INT_UNSIGNED); //测试浮点数 // BaseLocator<Number> hr2 = BaseLocator.holdingRegister(1, 0, DataType.FOUR_BYTE_INT_UNSIGNED); // master.setValue(hr2, 0x3F800000); master.setValue(hr1, 0x12345678); } /** * @Description: 批量读取 可以批量读取不同寄存器中数据 * @param master * @param slaveId * @throws ModbusTransportException * @throws ErrorResponseException */ public static void bathRead(ModbusMaster master, int slaveId) throws ModbusTransportException, ErrorResponseException { BatchRead<Number> batch = new BatchRead<Number>(); //****************批量读取不同寄存器中的单个数据******************** //读取线圈状态开关量 // batch.addLocator(1, BaseLocator.coilStatus(slaveId, 0)); //读取输入状态 开关量 // batch.addLocator(2, BaseLocator.inputStatus(slaveId, 0)); //读取保持寄存器数据 //根据设置的数据类型读取 // batch.addLocator(3, BaseLocator.holdingRegister(slaveId, 0, DataType.TWO_BYTE_INT_UNSIGNED)); //读取整形中16位中某一位的布尔值 // batch.addLocator(3.1, BaseLocator.holdingRegisterBit(slaveId, 0, 0)); //读取输入寄存器数据 //根据设置的数据类型读取 // batch.addLocator(4, BaseLocator.inputRegister(slaveId, 0, DataType.TWO_BYTE_INT_UNSIGNED)); //读取整形中16位中某一位的布尔值 // batch.addLocator(4.1, BaseLocator.inputRegisterBit(slaveId, 0, 0)); //高低字节颠倒 batch.addLocator(1, BaseLocator.holdingRegister(slaveId, 0, DataType.FOUR_BYTE_INT_UNSIGNED_SWAPPED)); //高低字节不颠倒 // batch.addLocator(1, BaseLocator.holdingRegister(slaveId, 0, DataType.FOUR_BYTE_INT_UNSIGNED)); //读取浮点数 // batch.addLocator(1, BaseLocator.holdingRegister(slaveId, 0, DataType.FOUR_BYTE_FLOAT)); BatchResults<Number> results = master.send(batch); // System.out.println("批量读取1:--" + results.getValue(1)); // System.out.println("批量读取2:--" + results.getValue(2)); // System.out.println("批量读取3:--" + results.getValue(3)); // System.out.println("批量读取3.1:--" + results.getValue(3.1)); // System.out.println("批量读取3.2:--" + results.getValue(3.2)); // System.out.println("批量读取4:--" + results.getValue(4)); // System.out.println("批量读取4.1:--" + results.getValue(4.1)); //高低字节颠倒 System.out.println(Long.toHexString((long) results.getValue(1))); } /** * @Description: 读取开关量 * @param master 主站实例 * @param slaveId 从站ID * @param start 起始位 * @param len 读取的长度 */ public static void readCoilTest(ModbusMaster master, int slaveId, int start, int len) { try { ReadCoilsRequest request = new ReadCoilsRequest(slaveId, start, len); ReadCoilsResponse response = (ReadCoilsResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("功能码:1--" + Arrays.toString(response.getBooleanData())); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @Description: 读取外围设备输入的开关量 * @param master 主站实例 * @param slaveId 从站ID * @param start 起始位 * @param len 长度 */ public static void readDiscreteInputTest(ModbusMaster master, int slaveId, int start, int len) { try { ReadDiscreteInputsRequest request = new ReadDiscreteInputsRequest(slaveId, start, len); ReadDiscreteInputsResponse response = (ReadDiscreteInputsResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("功能码:2--" + Arrays.toString(response.getBooleanData())); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @Description: 读取保持寄存器数据 * @param master 主站实例 * @param slaveId 从站ID * @param start 起始位 * @param len 长度 */ public static void readHoldingRegistersTest(ModbusMaster master, int slaveId, int start, int len) { try { ReadHoldingRegistersRequest request = new ReadHoldingRegistersRequest(slaveId, start, len); ReadHoldingRegistersResponse response = (ReadHoldingRegistersResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("功能码:3--" + Arrays.toString(response.getShortData())); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @Description: 读取外围设备输入的数据 * @param master 主站实例 * @param slaveId 从站ID * @param start 起始位 * @param len 长度 */ public static void readInputRegistersTest(ModbusMaster master, int slaveId, int start, int len) { try { ReadInputRegistersRequest request = new ReadInputRegistersRequest(slaveId, start, len); ReadInputRegistersResponse response = (ReadInputRegistersResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("功能码:4--" + Arrays.toString(response.getShortData())); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @Description: 写开关量数据 * @param master * @param slaveId 从站ID * @param offset 偏移量 * @param value 写入的值 */ public static void writeCoilTest(ModbusMaster master, int slaveId, int offset, boolean value) { try { WriteCoilRequest request = new WriteCoilRequest(slaveId, offset, value); WriteCoilResponse response = (WriteCoilResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("功能码:1,写入单个数据成功!"); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @Description: 保持寄存器，写入单个数据 * @param master * @param slaveId 从站ID * @param offset 偏移量 * @param value */ public static void writeRegisterTest(ModbusMaster master, int slaveId, int offset, int value) { try { WriteRegisterRequest request = new WriteRegisterRequest(slaveId, offset, value); WriteRegisterResponse response = (WriteRegisterResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("功能码:3,写入单个模拟量数据成功!"); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @Description: 读取异常状态 * @param master * @param slaveId */ public static void readExceptionStatusTest(ModbusMaster master, int slaveId) { try { ReadExceptionStatusRequest request = new ReadExceptionStatusRequest(slaveId); ReadExceptionStatusResponse response = (ReadExceptionStatusResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println(response.getExceptionStatus()); } catch (ModbusTransportException e) { e.printStackTrace(); } } public static void reportSlaveIdTest(ModbusMaster master, int slaveId) { try { ReportSlaveIdRequest request = new ReportSlaveIdRequest(slaveId); ReportSlaveIdResponse response = (ReportSlaveIdResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println(Arrays.toString(response.getData())); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @Description: 保持寄存器写多个数据 * @param master * @param slaveId 从站ID * @param start 起始位置 * @param values 数值 */ public static void writeCoilsTest(ModbusMaster master, int slaveId, int start, boolean[] values) { try { WriteCoilsRequest request = new WriteCoilsRequest(slaveId, start, values); WriteCoilsResponse response = (WriteCoilsResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("功能码:1,写入多个数据成功!"); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @Description: 保持寄存器写入多个模拟量数据 * @param master * @param slaveId 从站ID * @param start modbus起始位置 * @param values 数据 */ public static void writeRegistersTest(ModbusMaster master, int slaveId, int start, short[] values) { try { WriteRegistersRequest request = new WriteRegistersRequest(slaveId, start, values); WriteRegistersResponse response = (WriteRegistersResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("功能码:3,写入多个模拟量数据成功!"); } catch (ModbusTransportException e) { e.printStackTrace(); } } public static void writeMaskRegisterTest(ModbusMaster master, int slaveId, int offset, int and, int or) { try { WriteMaskRegisterRequest request = new WriteMaskRegisterRequest(slaveId, offset, and, or); WriteMaskRegisterResponse response = (WriteMaskRegisterResponse) master.send(request); if (response.isException()) System.out.println("Exception response: message=" + response.getExceptionMessage()); else System.out.println("Success"); } catch (ModbusTransportException e) { e.printStackTrace(); } } /** * @return * @Description: 获取AsiiMaster */ public static ModbusMaster getAsiiMaster(){ SerialParameters serialParameters = new SerialParameters(); // 设定MODBUS通讯的串行口 serialParameters.setCommPortId("COM4"); // 设置端口波特率 serialParameters.setBaudRate(9600); //硬件之间输入流应答控制 serialParameters.setFlowControlIn(0); //硬件之间输出流应答控制 serialParameters.setFlowControlOut(0); //设定数据位的位数 RTU:8位 ASCII:7位 serialParameters.setDataBits(7); //停止位的位数，如果无奇偶校验为2，有奇偶校验为1 serialParameters.setParity(2); //停止位的位数，如果无奇偶校验为2，有奇偶校验为1 serialParameters.setStopBits(1); // 设置端口名称 serialParameters.setPortOwnerName("ASCII"); // 创建ModbusMaster工厂实例 return new ModbusFactory().createAsciiMaster(serialParameters); } /** * @Description: 获取AsiiSalve * @return */ public static ModbusSlaveSet getAsciiSalve(){ SerialParameters serialParameters = new SerialParameters(); // 设定MODBUS通讯的串行口 serialParameters.setCommPortId("COM4"); // 设置端口波特率 serialParameters.setBaudRate(9600); //硬件之间输入流应答控制 serialParameters.setFlowControlIn(0); //硬件之间输出流应答控制 serialParameters.setFlowControlOut(0); //设定数据位的位数 RTU:8位 ASCII:7位 serialParameters.setDataBits(7); //奇偶校验位 无校验：0 奇校验：1 偶校验：2 serialParameters.setParity(2); //停止位的位数，如果无奇偶校验为2，有奇偶校验为1 serialParameters.setStopBits(1); // 设置端口名称 serialParameters.setPortOwnerName("ASCII"); // 创建ModbusMaster工厂实例 return new ModbusFactory().createAsciiSlave(serialParameters); } /** * @return * @Description: 获取RTUMaster */ public static ModbusMaster getRtuMaster(){ SerialParameters serialParameters = new SerialParameters(); // TestSerialPortWrapper portWrapper = new TestSerialPortWrapper("COM4", 9600, 0, 0, 8, 1, 2); // 设定MODBUS通讯的串行口 serialParameters.setCommPortId("COM4"); // 设置端口波特率 serialParameters.setBaudRate(9600); //硬件之间输入流应答控制 serialParameters.setFlowControlIn(0); //硬件之间输出流应答控制 serialParameters.setFlowControlOut(0); //设定数据位的位数 RTU:8位 ASCII:7位 serialParameters.setDataBits(8); //奇偶校验位 无校验：0 奇校验：1 偶校验：2 serialParameters.setParity(2); //停止位的位数，如果无奇偶校验为2，有奇偶校验为1 serialParameters.setStopBits(1); // 设置端口名称 serialParameters.setPortOwnerName("RTU"); // 创建ModbusMaster工厂实例 return new ModbusFactory().createRtuMaster(serialParameters); } /** * @Description: 创建TcpMaster * @return */ public static ModbusMaster getTcpMaster() { IpParameters ipParameters = new IpParameters(); //设置IP ipParameters.setHost("localhost"); //设置端口 默认为502 ipParameters.setPort(502); // 创建ModbusMaster工厂实例 return new ModbusFactory().createTcpMaster(ipParameters, true); } /** * @Description: IO盒测试 * @throws ModbusInitException * @throws ModbusTransportException * @throws ErrorResponseException */ @Test public void konnadTest() throws ModbusInitException, ModbusTransportException, ErrorResponseException{ IpParameters params = new IpParameters(); params.setHost("172.16.16.205"); params.setPort(502); //获取主站 ModbusMaster master = new ModbusFactory().createTcpMaster(params, false); master.init(); //读取MAC地址 ReadHoldingRegistersRequest request = new ReadHoldingRegistersRequest(1, 0, 3); ReadHoldingRegistersResponse response = (ReadHoldingRegistersResponse) master.send(request); // System.out.println("MAC地址" + ConversionUtil.getHexString(response.getData())); // ZC: 上面的 ConversionUtil貌似是 博主自己写的类，就先注释掉了 // WriteRegisterRequest request1 = new WriteRegisterRequest(1, 1056, 0); // ModbusResponse response1 = master.send(request1); // if (response1.isException()) // System.out.println("Exception response: message=" + response1.getExceptionMessage()); // else // System.out.println("功能码:3,写入多个模拟量数据成功!"); //写数据 DO0的状态 0x0400 I/O盒实际为DO1 // WriteRegisterRequest request1 = new WriteRegisterRequest(1, 1024, 1); // master.send(request1); //写数据 DO1上电的状态 0x0411 // WriteRegistersRequest request2 = new WriteRegistersRequest(1, 1040, new short[] {1, 1} ); // master.send(request2); //读取 0x0411状态 为上电后的状态 // ReadHoldingRegistersRequest request3 = new ReadHoldingRegistersRequest(1, 1040, 7); // ReadHoldingRegistersResponse response3 = (ReadHoldingRegistersResponse) master.send(request3); // System.out.println(Arrays.toString(response3.getShortData())); } /** * @Description: 创建modbus服务端 从站 */ @Test public void createSalve(){ //创建modbus工厂 ModbusFactory modbusFactory = new ModbusFactory(); //创建TCP服务端 final ModbusSlaveSet salve = modbusFactory.createTcpSlave(false); //创建ASCII服务端 // final ModbusSlaveSet salve = getAsciiSalve(); //向过程影像区添加数据 salve.addProcessImage(getModscanProcessImage(1)); new Thread(new Runnable() { @Override public void run() { try { salve.start(); } catch (ModbusInitException e) { e.printStackTrace(); } } }).start(); while (true) { synchronized (salve) { try { salve.wait(200); } catch (InterruptedException e) { e.printStackTrace(); } } for (ProcessImage processImage : salve.getProcessImages()) try { updateProcessImage((BasicProcessImage) processImage); } catch (IllegalDataAddressException e) { e.printStackTrace(); } } } /** * @Description: 创建寄存器 * @param slaveId * @return */ public static BasicProcessImage getModscanProcessImage(int slaveId) { BasicProcessImage processImage = new BasicProcessImage(slaveId); processImage.setInvalidAddressValue(Short.MIN_VALUE); //创建可读写开关量区 processImage.setCoil(0, true); processImage.setCoil(1, false); processImage.setCoil(2, true); processImage.setCoil(3, true); processImage.setCoil(5, true); processImage.setCoil(6, true); processImage.setCoil(7, true); processImage.setCoil(8, true); processImage.setCoil(9, true); //创建只读开关量区 processImage.setInput(0, false); processImage.setInput(1, false); processImage.setInput(2, true); processImage.setInput(3, false); processImage.setInput(4, true); processImage.setInput(5, true); processImage.setInput(6, true); processImage.setInput(7, true); processImage.setInput(8, true); processImage.setInput(9, true); //创建模拟量保持寄存器 processImage.setHoldingRegister(0, (short) 1); processImage.setHoldingRegister(1, (short) 10); processImage.setHoldingRegister(2, (short) 100); processImage.setHoldingRegister(3, (short) 1000); processImage.setHoldingRegister(4, (short) 10000); processImage.setHoldingRegister(5, (short) 10000); processImage.setHoldingRegister(6, (short) 10000); processImage.setHoldingRegister(7, (short) 10000); processImage.setHoldingRegister(8, (short) 10000); processImage.setHoldingRegister(9, (short) 10000); //创建模拟量只读寄存器 processImage.setInputRegister(0, (short) 10000); processImage.setInputRegister(1, (short) 1000); processImage.setInputRegister(2, (short) 100); processImage.setInputRegister(3, (short) 10); processImage.setInputRegister(4, (short) 1); processImage.setInputRegister(5, (short) 1); processImage.setInputRegister(6, (short) 1); processImage.setInputRegister(7, (short) 1); processImage.setInputRegister(8, (short) 1); processImage.setInputRegister(9, (short) 1); processImage.addListener(new BasicProcessImageListener()); return processImage; } /** * @Description: 客户端修改本地寄存器的数据 * @author-lsh * @date 2017年9月13日 下午5:47:30 */ public static class BasicProcessImageListener implements ProcessImageListener { @Override public void coilWrite(int offset, boolean oldValue, boolean newValue) { System.out.println("Coil at " + offset + " was set from " + oldValue + " to " + newValue); } @Override public void holdingRegisterWrite(int offset, short oldValue, short newValue) { // Add a small delay to the processing. // try { // Thread.sleep(500); // } // catch (InterruptedException e) { // // no op // } System.out.println("HR at " + offset + " was set from " + oldValue + " to " + newValue); } } /** * @Description: 更新寄存器的数据 * @param processImage * @throws IllegalDataAddressException */ static void updateProcessImage(BasicProcessImage processImage) throws IllegalDataAddressException { processImage.setInput(0, !processImage.getInput(0)); processImage.setInput(1, !processImage.getInput(1)); // processImage.setNumeric(RegisterRange.INPUT_REGISTER, 20, DataType.FOUR_BYTE_FLOAT, ir1Value += 0.01); // // short hr1Value = processImage.getNumeric(RegisterRange.HOLDING_REGISTER, 80, DataType.TWO_BYTE_BCD) // .shortValue(); // processImage.setNumeric(RegisterRange.HOLDING_REGISTER, 80, DataType.TWO_BYTE_BCD, hr1Value + 1); } @Test public void StringTest(){ String a = "abc123456789"; char[] charArray = a.toCharArray(); System.err.println(Arrays.toString(charArray)); } }
4、
5、
7231
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
