前几天我公司售后技术员拿回几台H3C S5024PV2_EI交换机，所有交换机的故障都是无法进入应用系统配置界面，只能启动到BootWare扩展字段。在查找相关资料和拔打H3C售后服务电话后，得到相关资料和更新文件，在对所有交换机尝试做了更新固件的操作后，其中一台在烤机后故障排除，但其余几台烤机发现重启过后还是无法正常工作，只能返厂维修（H3C售后技术也是这样解释）。
        虽然刷新固件并没有把所有交换机都修复，但还是有一定概率修复机会的（修复一台）。下面我就把过程和方法分享给大家，希望对以后的工作有所帮助。

       H3C S5024PV2_EI交换机启动故障如下：

****************************************************************************
*                                                                          *
*                 H3C S5024PV2-EI BootWare, Version 1.03                   *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.

Compiled Date       : Apr 14 2017 15:05:19
CPU Type            : MIPS4kec
CPU L1 Cache        : 16KB
CPU Clock Speed     : 500MHz
Memory Type         : DDR3 SDRAM
Memory Size         : 128MB
Memory Speed        : 300MHz
BootWare Size       : 3MB
Flash Size          : 32MB

Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Restore to Factory Default Configuration                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9):

    要更新固件，我们首先要把新的bin文件导入交换机内存中。所以我们要先把老的bin文件给删除，清空内存。方法如下：

Enter your choice(0-9): 4    ——这里选择4（文件控制）

Note:the operating device is flash                                       

| |<1> Display All File(s)                                                  

| |<2> Set Application File type