# These settings were set by the catalyst build script that automatically

# built this stage.

# Please consult /etc/make.conf.example for a more detailed example.

#

SYNC="rsync://mirror.averse.net/gentoo-portage"

PORTDIR=/usr/portage

ARCH=x86


PORTAGE_TMPDIR=/var/tmp

USE="-esd -qt3 -gpm -X -ipv6 -tk"

USE="${USE} qt4"


# These settings were set by the catalyst build script that automatically built this stage

# Please consult /etc/make.conf.example for a more detailed example

#---------------------------------------------------------------------------

#CFLAGS="-O2 -march=athlon-xp -pipe"

#athlon-xp

#CHOST="x86_64-pc-linux-gnu"

#CXXFLAGS="${CFLAGS}"

#--------------------------------------------------------------

#CFLAGS="-march=athlon64 -O2 -pipe -fomit-frame-pointer -msse3"

#CFLAGS="-march=athlon-xp -mfpmath=sse -mmmx -msse -msse2 -msse3 -m3dnow -pipe -O3 -funroll-loops -funit-at-a-time -fpeel-loops -ftracer -funswitch-loops -fweb -frename-registers -fbranch-target-load-optimize2"

#LDFLAGS="-Wl,-O1 -Wl,--enable-new-dtags -Wl,--sort-common -s"

#--------------------------------------------------------------

#ACCEPT_KEYWORDS="x86"

#ACCEPT_KEYWORDS="~x86"

ACCEPT_KEYWORDS="~amd64"

#ARCH="x86"

#--------------------------------------------------------------

#CHOST="i686-pc-linux-gnu"

CHOST="x86_64-pc-linux-gnu"

#CFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer -msse3"

#CFLAGS="-march=pentium-m -O2 -pipe -fomit-frame-pointer"

#CFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer" #for x86_32

#CFLAGS="-march=core2 -O2 -pipe -fomit-frame-pointer -msse4.1" #for x86_64

#CFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer"


CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"

#GCC 4.3 has -march=core2

# pentium-m     Low power version of Intel Pentium3 with MMX, SSE, SSE2.

#               Used by Centrino notebooks.

# prescott      Intel Pentium4 with MMX, SSE, SSE2 and SSE3.

# nocona        Intel Pentium4 with 64-bit extensions, MMX, SSE, SSE2

#               and SSE3.


#ACCEPT_KEYWORDS="~x86"


LANG=C

LANGUAGE=C

LC_ALL=C

LC_COLLATE=C

LC_CTYPE=C

LC_MESSAGES=C

LC_NUMERIC=C

LC_TIME=C

CXXFLAGS="${CFLAGS}"

#CXXFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer"


MAKEOPTS="-j3"

#LDFLAGS="-Wl,-O1"  ###OK+++

LDFLAGS="-Wl,-O1 -Wl,--as-needed"  #-->use this

#LDFLAGS="-Wl,-O1 -Wl,--enable-new-dtags -Wl,--sort-common -s"

#EMERGE_DEFAULT_OPTS="-v"

#--------------------------------------------------------------

#LDFLAGS="-Wl,-O1"

#LDFLAGS="-Wl,-O1 -Wl,--as-needed"

#LDFLAGS="-Wl,-O2"

#LDFLAGS="-Wl,-O1 -Wl,--as-needed"

#LDFLAGS="-Wl,-O1 -Wl,--enable-new-dtags -Wl,--sort-common -s"

#LDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,--sort-common -Wl,--hash-style=both -s"

#LDFLAGS="-Wl,-O2,--as-needed"

#--------------------------------------------------------------


#BUILD_PREFIX=/home/yegle/tmp  ## set tmp_dir,default is /var/tmp/


#--------------------------------------------------------------

#==== for crossdev ========================


#   CFLAGS="-march=athlon-xp -pipe"

#   CXXFLAGS="${CFLAGS}"

#   LDFLAGS=""

#==== for openembedded========================


#CFLAGS="-march=athlon-xp -O2 -pipe"

#CFLAGS="-march=athlon-xp -pipe"

#CXXFLAGS="${CFLAGS}"

#LDFLAGS=""

#LDFLAGS="-Wl,-O2,--as-needed"



#---------------------------------------------------------------------------


#==== for crossdev ========================


LINGUAS="zh_CN zh"


#---------------------------------------------------------------------------


#---------------------------------------------------------------------------

#ACCEPT_KEYWORDS="~amd64"

#---------------------------------------------------------------------------


#---------------------------------------------------------------------------

# /usr/portage/profiles/use.desc

#   USE="accessibility dbus lvm2 a52 aac automount bash-completion boost bzip2 chroot cjk \

#        colordiff command-args compress cscope curl dbase dbm directfb \

#        disk-partition dts fat ffmpeg fontconfig glib gtalk gzip \

#        hddtemp ithreads jpeg2k jpgraph latin1 mmap \

#        network ntfs nvidia openssh openssl opensslcrypt posix \

#        rar sandbox scim serial 3dnow 3dnowext p_w_picpathmagick \

#        sftp sql sqlite3 subversion symlink threads unzip usb v4l \

#        v4l2 vim vim-pager vim-syntax vim-with-x wav wma real \

#        xine xinetd xvid zip gssapi theora -cups ipv6 -kde truetype-fonts \

#        -type1-fonts"

#

#   USE="$USE 3dnow 3dnowext mmx sse fftw gmp mudflap openmp chm samba ieee1394 bluetooth oss wifi hdaps dvd dvdr dvdread fam fastcgii p_w_picpathmagick"

#

#   USE="$USE win32codecs sse2 acpi alsa djvu flac lm_sensors mad mmap mp3 mplayer ncurses nls pcmcia startup-notification xface xinerama xinetd zlib ssl"

#   # added on Apr 30, 2008

#   # use for Hardware with Multimedia Instruction

#   USE="$USE mmx sse sse2 ssse3 nvidia srt"

#

#   # use for Desktop Environment

#   USE="${USE} X gtk gtk2 -gnome hal avahi xft"

#

#   # use for Chinese Support

#   USE="${USE} cjk immqt-bc"

#

#   # use for File Formats Support

#   USE="${USE} exif gif jpeg mp3 mng mpeg ogg openexr pdf png svg tiff wma wmf xml xpm"

#

#   # use for Multimedia Support

#   USE="${USE} alsa cdr cddb cdparanoia css dts dvd dvdr openal opengl v4l v4l2 vcd xv xvmc" #arts

#

#   # use for Codecs

#   USE="${USE} a52 aac aalib audiofile cdparanoia dv dvdread encode ffmpeg flac lame live mad quicktime theora vorbis x264 xvid"

#

#   # use for Power Management

#   USE="${USE} acpi -apm"

#

#   # use for Programming

#   USE="${USE} bash-completion -examples lua python -ruby subversion vim-syntax" #csv

#

#   # use for Accounting

#   USE="${USE} hbci ofx quotes stock"

#

#   # misc.

#   USE="${USE} branding samba wifi" #fbsplash

#

#   # TODO: Add this next emerge -e world

#   #USE="${USE} xinerama"

#

#   USE="${USE} lm-sensors nforce2 nvidia pmu"

#   USE="${USE} l7filter"

#   USE="${USE} xcb xinerama"

#   USE="${USE} kdeprefix xcomposite" #KDE4

#   USE="${USE} kerberos caps -imlib"

#   USE="${USE} logrotate"

#   USE="${USE} tk -sqlite"

#   USE="${USE} -qt -qt3  -qt4 qt3support pch"

#   USE="${USE} -eds" #evolution-data-server

#   USE="${USE} policykit"

#   USE="${USE} java6" #java

#


#---------------------------------------------------------------------------

#USE="immqt "

#FEATURES="userpriv usersandbox ccache sandbox parallel-fetch userfetch" #getbinpkg keepwork

FEATURES="sandbox parallel-fetch userfetch preserve-libs noinfo metadata-transfer ccache" #nodoc metadata-transfer getbinpkg keepwork keeptemp ccache

PORTAGE_ECLASS_WARNING_ENABLE="0"


INPUT_DEVICES="keyboard mouse evdev synaptics"

VIDEO_CARDS="nvidia vga fbdev" #vesa

#ALSA_CARDS="es1371"

ALSA_CARDS="hda-intel"

#---------------------------------------------------------------------------

CCACHE_DIR="/var/tmp/ccache"

CCACHE_SIZE="1G"

#---------------------------------------------------------------------------


MAKEOPTS="-j3"


PORTAGE_BINHOST="https://e.ututo.org.ar/athlon-xp/ http://gentoo.modulix.net/gentoo/grp/x86_64-pc-linux-gnu/athlon64/gnome/"

#PORTDIR=/home/lvdata/funtoo/portage/

#PORTAGE_TMPDIR=/home/lvdata/portage_temp

PKGDIR=/usr/portage/packages

PORT_LOGDIR=/var/log/portage

AUTOCLEAN="yes"


PORTAGE_NICENESS=10

PORTAGE_RSYNC_INITIAL_TIMEOUT=60

#---------------------------------------------------------------------------

#GENTOO_MIRRORS="http://gentoo.gg3.net/ ftp://gg3.net/pub/linux/gentoo/"

#GENTOO_MIRRORS="http://fido.online.kz/gentoo"

#---------------------------------------------------------------------------

#FETCHCOMMAND='proz --no-getch --no-search ${URI} -P ${DISTDIR}'

#==========================OK====================================

#--------------- copy from elog ----------------------------------------------

FETCHCOMMAND="/usr/bin/axel -a -o \${DISTDIR}/\${FILE} \${URI}"

RESUMECOMMAND="${FETCHCOMMAND}"

#-------------------------------------------------------------

#FETCHCOMMAND="/usr/bin/axel -a -n2 \${URI} -o \${DISTDIR}"

#RESUMECOMMAND="/usr/bin/axel -a -n2 \${URI} -o \${DISTDIR}"

#==========================OK====================================

#FETCHCOMMAND="/usr/bin/wget --limit-rate=200k  -c -t 5 --passive-ftp -P \${DISTDIR} \${URI}"

#RESUMECOMMAND="/usr/bin/wget --limit-rate=200k -c -t 5 --passive-ftp -P \${DISTDIR} \${URI}"

#RESUMECOMMAND="${FETCHCOMMAND}"

#==========================OK====================================

#==========================OK====================================

#FETCHCOMMAND="/usr/bin/axel -a -n 4 -o \${DISTDIR}/\${FILE} \${URI}"

#RESUMECOMMAND="/usr/bin/axel -a -n 4 -o \${DISTDIR}/\${FILE} \${URI}"

#

#FETCHCOMMAND="/usr/bin/axel -a -n 10 -S 5 -o \${DISTDIR}/\${FILE} \${#URI}"

#RESUMECOMMAND="/usr/bin/axel -a -n 10 -S 5 -o \${DISTDIR}/\${FILE} \${URI}"

#


#FETCHCOMMAND="/usr/bin/wget  -c -t 5 --passive-ftp -P \${DISTDIR} \${URI}"

#RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp -P \${DISTDIR} \${URI}"

#RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp -P \${DISTDIR}"

#---------------------------------------------------------------------------


#RSYNC_RATELIMIT=20

#FETCHCOMMAND="/usr/bin/wget --limit-rate=50k -t 5 --passive-ftp -P \${DISTDIR} \${URI}"

#RESUMECOMMAND="/usr/bin/wget --limit-rate=50k -c -t 5 --passive-ftp -P \${DISTDIR}"

#---------------------------------------------------------------------------

#================================================================

#---------------------------------------------------------------------------

#FETCHCOMMAND="axel -a -n 3 -N -o \${DISTDIR}/\${FILE} \${URI}"

#RESUMECOMMAND="axel -a -n 3 -N -o \${DISTDIR}/\${FILE} \${URI}"

#---------------------------------------------------------------------------

#source /usr/portage/local/layman/make.conf

#FETCHCOMMAND="/usr/bin/axel -a -o \${DISTDIR}/\${FILE}/\${URI}"

#RESUMECOMMAND=${FETCHCOMMAND}

#---------------------------------------------------------------------------

#==============================================================================

# Lukemftp (BSD ftp):

#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}"

#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}"

#

# Prozilla (turbo downloader)

#FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}'　#[去掉前面的#]

#FETCHCOMMAND='/usr/bin/proz --no-getch --no-search ${URI} -P ${DISTDIR}'

#nano /etc/prozilla.conf [配置prozilla，把这一行threads改为=10，十线程下载，

#ftpsearch=OFF (不自动搜索下载镜像)]

#==============================================================================

#---------------------------------------------------------------------------

PORTAGE_ELOG_SYSTEM="save"

PORTAGE_ELOG_CLASSES="warn error info"

#---------------------------------------------------------------------------


#mirrorselect -D -s4

#---------------------------------------------------------------------------

#PORTDIR_OVERLAY="/usr/local/myportage"

#PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /usr/portage/local/layman/gentoo-china"

#----

#PORTDIR_OVERLAY="/usr/portage/local/layman/gentoo-china"

######--------------------------------

###layman -a openmoko

#http://gentoo.mindzoo.de/index.cgi/wiki/cross-compiling

#PORTDIR_OVERLAY="/var/lib/layman/openmoko/trunk/openmoko-target"

#-------------------------------------------------

#PORTDIR_OVERLAY="/usr/portage"

PORTDIR_OVERLAY=""

#PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /var/lib/layman/openmoko/trunk/openmoko-target"

#PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /var/lib/layman/openmoko/tags/20090616/openmoko-target"

PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /var/lib/layman/gentoo-china"

#PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /var/lib/layman/lxde"

#PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /var/lib/layman/java-overlay"

#PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /var/lib/myportage"



#PORTDIR_OVERLAY="/usr/portage /var/lib/layman/gentoo-china /var/lib/layman/lxde /var/lib/myportage /var/lib/layman/openmoko/trunk/openmoko-target"

#PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /usr/portage/local/layman/gentoo-taiwan"

#-------------------------------------------------


######--------------------------------


#----

#PORTDIR_OVERLAY="/usr/portage/local/layman/gentoo-china/ /usr/local/myportage/"

#PORTDIR_OVERLAY="/usr/local/myportage /usr/portage/local/layman/gentoo-china"

#----


#PORTAGE_RSYNC_EXTRA_OPTS="--exclude-from=/etc/portage/rsync_excludes"

#---------------------------------------------------------------------------

##一. 网通

#GENTOO_MIRRORS="http://61.135.158.199"

#SYNC="rsync://61.135.158.199/gentoo-portage"

#点评：版主fei所架设。dell 2650 4G内存。双P4 xeon 2.8G 超线程,只做了portage和distfiles和snapshots镜象。

#每天同步两次。北京网通机房。千兆带宽。

##二. 电信

#GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo"

#点评：sanfanling帮忙联系建立的，速度很快

#GENTOO_MIRRORS="http://linux.ntcu.net/ftp/dists/gentoo"

#SYNC="rsync://linux.ntcu.net/gentoo-portage"

#点评：从上海连，可达200KB/S

#GENTOO_MIRRORS="ftp://ftp.linuxforum.net/gentoo http://mirror.gentoo.gr.jp"

#点评：据反映linuxforum的镜像更新可能不够勤，所以以gentoo.gr.jp为后备

#GENTOO_MIRRORS="http://mirrors.acm.cs.rpi.edu/gentoo"

#SYNC="rsync://acm.cs.rpi.edu/gentoo-portage"

#点评：这是fakeid和assemble推荐的

##三. 教育网

#GENTOO_MIRRORS="ftp://ftp3.tsinghua.edu.cn/mirror/gentoo"

#SYNC="rsync://ftp3.tsinghua.edu.cn/gentoo/gentoo-portage"

##点评：清华的，教育网访问速度超快，可以sync，教育网首选。

#GENTOO_MIRRORS="ftp://ftp.sjtu.edu.cn/gentoo"

#点评：上海交大

##四. 内地以外

#GENTOO_MIRRORS="http://ftp.ncnu.edu.tw/Linux/Gentoo"

#SYNC="rsync://rsync.gentoo.org/gentoo-portage"

#点评：这是zhllg用的，从香港连，很快

#---------------------------------------------------------------------------


SYNC="rsync://mirror.averse.net/gentoo-portage"

#SYNC="rsync://linux.ntcu.net/gentoo-portage"

#http_proxy = http://211.140.192.186:8080

#PORTAGE_RSYNC_INITIAL_TIMEOUT=60

SYNC="rsync://linux.ntcu.net/gentoo-portage"


#---------------------------------------------------------------------------

SYNC="rsync://rsync.asia.gentoo.org/gentoo-portage"

SYNC="rsync://61.135.158.199/gentoo-portage"

GENTOO_MIRRORS="http://gentoo.aditsu.net http://61.135.158.199  ftp://gentoo.anheng.com.cn/gentoo"

#GENTOO_MIRRORS="http://gentoo.aditsu.net/"

#GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo"

#GENTOO_MIRRORS="http://mirror.datapipe.net/gentoo ftp://ftp.twaren.net/Linux/Gentoo/ http://mirror.pacific.net.au/linux/Gentoo"

#http://ftp.nara.wide.ad.jp/pub/Linux/gentoo/ http://linux.ntcu.net/ftp/dists/gentoo

#GENTOO_MIRRORS="http://mirror.gentoo.gr.jp/ http://gentoo.gg3.net/ http://gentoo.channelx.biz/ http://ftp.gentoo.or.kr/"

#SYNC="rsync://193.190.198.20/gentoo-portage"

#SYNC="rsync://211.14.6.124/gentoo-portage"

#SYNC="rsync://rsync.gentoo.org/gentoo-portage"

#---------------------------------------------------------------------------

#GENTOO_MIRRORS="http://ftp.nara.wide.ad.jp/pub/Linux/gentoo/ $GENTOO_MIRRORS"

#---------------------------------------------------------------------------

#SYNC="rsync://rsync.au.gentoo.org/gentoo-portage"

#SYNC="rsync://mirror.averse.net/gentoo-portage"

#SYNC="rsync://61.135.158.199/gentoo-portage"

#SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage/"

#SYNC="rsync://mirror.espri.arizona.edu/gentoo/"

#SYNC="rsync://gentoo.139pay.com/gentoo-portage"

#SYNC="rsync://linux.ntcu.net/gentoo-portage"

#SYNC="rsync://rsync.gentoo.org/gentoo-portage"

#SYNC="rsync://gentoo.chem.wisc.edu/gentoo/gentoo-portage"

#SYNC="rsync://acm.cs.rpi.edu/gentoo-portage"

#SYNC="rsync://61.135.158.199/gentoo-portage"

#SYNC="rsync://38.99.64.200/gentoo-portage"

####SYNC="rsync://rsync.asia.gentoo.org/gentoo-portage"

#SYNC="rsync://219.111.13.142/gentoo-portage"

#SYNC="rsync://61.135.158.199/gentoo-portage"

#SYNC="rsync://gentoo.kems.net/gentoo-portage"

#SYNC="rsync://202.1.117.1/gentoo-portage"

#SYNC="rsync://ftp.swin.edu.au"

#SYNC="rsync://rsync.gg3.net/portage"

#SYNC="rsync://rsync.de.gentoo.org/gentoo-portage"

#SYNC="rsync://mirror.lupaworld.com/gentoo/gentoo-x86-portage"

#SYNC="rsync://http://mirror.lupaworld.com/gentoo/gentoo-x86-portage/"

#SYNC="rsync://ftp3.tsinghua.edu.cn/gentoo/gentoo-portage"

#---------------------------------------------------------------------------

#SYNC="rsync://192.168.1.9/gentoo-portage"

#GENTOO_MIRRORS="http://192.168.1.3 $GENTOO_MIRRORS"

#---------------------------------------------------------------------------

####mirror ===>> /etc/portage/mirrors

#---------------------------------------------------------------------------

#GENTOO_MIRRORS="http://ftp.daum.net/gentoo/"

#

#FETCHCOMMAND="/usr/bin/wget --limit-rate=200k  -c -t 5 --passive-ftp -P \${DISTDIR} \${URI}"

#ESUMECOMMAND="/usr/bin/wget --limit-rate=200k -c -t 5 --passive-ftp -P \${DISTDIR} \${URI}"