By bob chen
2011.9.22
现象:
Cisco3825 固化2个GE,1个SFP
做配置的时候只能看到Gi0/0和Gi0/1 2个端口,3个口能同时用吗?
Table 3. Performance and System Characteristics of the Cisco 3800 Series
查思科官网说明
板载SFP端口和gi0/0只能二选一复用
启用光纤端口配置如下
Cisco3825(config)#interface gigabitEthernet 0/0
Cisco3825(config-if)#media-type SFP
ONBOARD GIGABIT ETHERNET PORTS
Q. How many Gigabit Ethernet ports are there on Cisco 3800 Series systems?
A. There are two Gigabit Ethernet ports on Cisco 3800 Series systems. Port 1 is a fixed 10/100/1000BASE-T RJ-45. Port 0 can choose between 10/100/1000BASE-T RJ-45 and an SFP module slot. SFP modules are optional.
Q. How can I choose between the RJ-45 and SFP module slot in Gigabit Ethernet Port 0?
A. A new command-line interface (CLI) allows you to choose between the two media types. The "SFP" option will only come up if there is a SFP module plugged into the slot. RJ-45 is the default.
Enter configuration commands, one per line. End with CNTL/Z.
Cisco3825(config)#interface gigabitEthernet 0/0
Cisco3825(config-if)#media-type ?
rj45 Use RJ45 connector
sfp Use SFP connector
转载于:https://blog.51cto.com/boochem/671259