Cloud in Action: Install and Deploy the Self-Service Networks for OpenStack
Last week we deployed the simplest architecture of OpenStack with Networking Option 1, which only supports the layer-2 services and VLAN segmentation of networks: http://8493144.blog.51cto.com/8483144/1975230
This time we are going to deploy Networking Option 2, which allows to enable self-service networking using overlay segmentation methods such as VXLAN, and provide the layer-3 services such as routing and NAT, as well as the foundation foradvanced services such as LBaaS and FWaaS. We adopt the same physical network design as last time but with the different software installation and configuration.
Theory of Self-Service Networks
The provider network such as “xgf_provider”,includes a DHCP server and connects to Internet directly. When a VM is launched in the provider network, it will get the IP addr such as 192.168.100.204 from the DHCP server(192.168.100.0/24) and then visit Internet.
The self-service network such as “xgf_sub_selfservice_2”, which is created and supported by VXLAN and also includes its own DHCP server, connects to the provider network and Internet via the vRouter(uplink to the provider network:192.168.100.203 and downlink to self-service network:192.168.102.111) providing the NAT service. The instances launched in this self-service network,will get the IP address such as 192.168.102.6 from the DHCP server(192.168.102.0/24) and then are able to visit Internet.
In this test, we use the IP addresses of management interface(10.0.0.11,10.0.0.31,10.0.0.32) to handle overlay networks and tunnel traffic.
The logical design and configuration for self-service networks in this test:
The provider network: xgf_provider;
The self-service network of Demo: xgf_sub_selfservice_1;
The self-service network of Admin: xgf_sub_selfservice_2;
Admin launches VMs in both xgf_provider and xgf_sub_selfservice_2;
Demo launches VMs in xgf_sub_selfservice_1;
Software Installation and Configuration
Please refer the last part.
Lanuch instances
Lanuch an instance | ||
controller | compute1 | compute2 |
/ Create the provider network . admin-openrc openstack network create --share --external --provider-physical-network provider --provider-network-type flat xgf_provider
/ Create a subnet on the provider network openstack subnet create --network xgf_provider --allocation-pool start=192.168.100.200,end=192.168.100.220 --dns-nameserver 10.0.1.1 --gateway 192.168.100.111 --subnet-range 192.168.100.0/24 xgf_sub_provider
/ Create m1.nano flavor openstack flavor create --id 0 --vcpus 1 --ram 64 --disk 1 m1.nano
/ Add rules for the default security group openstack security group rule create --proto icmp default openstack security group rule create --proto tcp --dst-port 22 default
/ Create the self-service network for Demo . demo-openrc openstack network create xgf_selfservice_1
openstack subnet create --network xgf_selfservice_1 --dns-nameserver 10.0.1.1 --gateway 192.168.101.111 --subnet-range 192.168.101.0/24 xgf_sub_selfservice_1
// Create the virtual router openstack router create demo_router neutron router-interface-add demo_router xgf_sub_selfservice_1 neutron router-gateway-set demo_router xgf_provider
/ Create the self-service network for Admin . admin-openrc openstack network create xgf_selfservice_2
openstack subnet create --network xgf_selfservice_2 --dns-nameserver 10.0.1.1 --gateway 192.168.102.111 --subnet-range 192.168.102.0/24 xgf_sub_selfservice_2
// Create the virtual router openstack router create admin_router neutron router-interface-add admin_router xgf_sub_selfservice_2 neutron router-gateway-set admin_router xgf_provider
| // | / |
/ Verify operation . admin-openrc openstack flavor list openstack p_w_picpath list openstack network list openstack security group list openstack server list ip netns . admin-openrc neutron router-port-list admin_router . demo-openrc neutron router-port-list demo_router | ||
Software Installation andConfiguration
/
Basic configuration
Basic configuration | ||
controller | compute1 | compute2 |
/ Create VMs | ||
user/pw: gset/ipcc2014 c:\xgf\OpenStack\controller
8.192 GB MEM 4 Processors with Virtualize Intel VT-x/EPT 30GB HD Network Adapter(eth0): NAT Network Adapter2(eth1):Host-only | user/pw: gset/ipcc2014 c:\xgf\OpenStack\compute1
4.096 GB MEM 2 Processors with Virtualize Intel VT-x/EPT 20GB HD Network Adapter(eth0): NAT Network Adapter2(eth1):Host-only | user/pw: gset/ipcc2014 c:\xgf\OpenStack\compute2
4.096 GB MEM 2 Processors with Virtualize Intel VT-x/EPT 20GB HD Network Adapter(eth0): NAT Network Adapter2(eth1):Host-only |
System settings/brightness&lock – uncheck ‘Lock’ CTRL+ALT+T / Terminal / Edit / Profile Preferences / Terminal Size: 80 x 40
/ Upgrade Ubuntu Software sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade
/ Install VMware Tools sudo mkdir /mnt/cdrom Reinstall VMware Tools by VMware Workstation sudo mount /dev/cdrom /mnt/cdrom cd /mnt/cdrom sudo cp VMwareTools-10.1.6-5214329.tar.gz /opt cd /opt sudo tar -xvzf VMwareTools-10.1.6-5214329.tar.gz cd vmware-tools-distrib sudo ./vmware-install.pl
/ Change interace names to eth0, eth1, eth2…. sudo gedit /etc/default/grub GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0"
sudo update-grub sudo grub-mkconfig -o /boot/grub/grub.cfg
/ Configure name resolution sudo gedit /etc/hosts 127.0.0.1 localhost 10.0.0.11 controller 10.0.0.31 compute1 10.0.0.32 compute2 | ||
/ Configure interfaces, IP Addr and DNS | ||
sudo gedit /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.11 netmask 255.255.255.0 gateway 10.0.0.2 dns-nameserver 10.0.1.1 auto eth1 iface eth1 inet manual | sudo gedit /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.31 netmask 255.255.255.0 gateway 10.0.0.2 dns-nameserver 10.0.1.1 auto eth1 iface eth1 inet manual | sudo gedit /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.32 netmask 255.255.255.0 gateway 10.0.0.2 dns-nameserver 10.0.1.1 auto eth1 iface eth1 inet manual |
/ Configure hostnames sudo gedit /etc/hostname | ||
controller | compute1 | compute2 |
/ Install openssh & git sudo apt-get install openssh-server sudo apt-get install openssh-client sudo apt-get install sysv-rc-conf sudo sysv-rc-conf ssh on sudo sysv-rc-conf --list | grep ssh netstat -ta | grep ssh
sudo apt-get install git-core | ||
NTP– Chrony
Network Time Protocl – NTP | ||
controller | compute1 | compute2 |
/ Install Chrony to synchronize services among nodes | ||
sudo apt-get install chrony
sudo gedit /etc/chrony/chrony.conf allow 10.0.0.0./24 // put at the first line
sudo service chrony restart | sudo apt-get install chrony
sudo gedit /etc/chrony/chrony.conf server controller iburst // put at the first line # pool 2.debian.pool.ntp.org offline iburst // comment out
sudo service chrony restart | sudo apt-get install chrony
sudo gedit /etc/chrony/chrony.conf server controller iburst // put at the first line # pool 2.debian.pool.ntp.org offline iburst // comment out
sudo service chrony restart |
/ Verify operation | ||
OpenStackpackages
OpenStack packages | ||
controller | compute1 | compute2 |
/ For all nodes: controller, compute and block storage…. sudo apt-get install software-properties-common sudo add-apt-repository cloud-archive:ocata sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install python-openstackclient | ||
SQLdatabase - MariaDB
SQL database | ||
controller | compute1 | compute2 |
/ Install and Run MySQL sudo apt-get install mariadb-server python-pymysql
sudo gedit /etc/mysql/mariadb.conf.d/99-openstack.cnf [mysqld] bind-address = 10.0.0.11 default-storage-engine = innodb innodb_file_per_table = on max_connections = 4096 collation-server = utf8_general_ci character-set-server = utf8
sudo service mysql restart sudo mysqladmin -u root password ipcc2014 // for database root user sudo mysql_secure_installation netstat -tnlp | grep 3306
/ Set password for Linux root user sudo passwd // set ‘ipcc2014’ su root // enter the root mode #mysql // the root user no longer uses a password for local access to MySQL server MariaDB [(none)]> show databases; use mysql; show tables; | ||
Messagequeue – RabbitMQ
Message queue | ||
Controller | compute1 | compute2 |
/ Install RabbitMQ sudo apt-get install rabbitmq-server sudo rabbitmqctl add_user openstack ipcc2014 sudo rabbitmqctl set_permissions openstack ".*" ".*" ".*" | ||
Memcached
Memcached | ||
Controller | compute1 | compute2 |
/ Install Memcached sudo apt-get install memcached python-memcache
sudo gedit /etc/memcached.conf -l 10.0.0.11
sudo service memcached restart | ||
Identityservice – Keystone
Identity service | ||
controller | compute1 | compute2 |
/ Create a database su root // enter the root mode #mysql MariaDB [(none)]> CREATE DATABASE keystone; GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'localhost' IDENTIFIED BY 'ipcc2014'; GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'%' IDENTIFIED BY 'ipcc2014';
/ Install Keystone sudo apt-get install keystone
sudo gedit /etc/keystone/keystone.conf [database] connection = mysql+pymysql://keystone:ipcc2014@controller/keystone
[token] provider = fernet
sudo su -s /bin/sh -c "keystone-manage db_sync" keystone
sudo keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone
sudo keystone-manage credential_setup --keystone-user keystone --keystone-group keystone
sudo keystone-manage bootstrap --bootstrap-password ipcc2014 --bootstrap-admin-url http://controller:35357/v3/ --bootstrap-internal-url http://controller:5000/v3/ --bootstrap-public-url http://controller:5000/v3/ --bootstrap-region-id RegionOne
sudo gedit /etc/apache2/apache2.conf ServerName controller // put in the first line
sudo service apache2 restart sudo rm -f /var/lib/keystone/keystone.db
export OS_USERNAME=admin export OS_PASSWORD=ipcc2014 export OS_PROJECT_NAME=admin export OS_USER_DOMAIN_NAME=Default export OS_PROJECT_DOMAIN_NAME=Default export OS_AUTH_URL=http://controller:35357/v3 export OS_IDENTITY_API_VERSION=3
openstack project create --domain default --description "Service Project" service openstack project create --domain default --description "Demo Project" demo openstack user create --domain default --password-prompt demo // ipcc2014 openstack role create user openstack role add --project demo --user demo user | ||
/ Verify operation sudo gedit /etc/keystone/keystone-paste.ini // remove ‘admin_token_auth’ from the [pipeline:public_api], [pipeline:admin_api], and [pipeline:api_v3] sections.
unset OS_AUTH_URL OS_PASSWORD
openstack --os-auth-url http://controller:35357/v3 --os-project-domain-name default --os-user-domain-name default --os-project-name admin --os-username admin token issue openstack --os-auth-url http://controller:5000/v3 --os-project-domain-name default --os-user-domain-name default --os-project-name demo --os-username demo token issue
gedit admin-openrc export OS_PROJECT_DOMAIN_NAME=Default export OS_USER_DOMAIN_NAME=Default export OS_PROJECT_NAME=admin export OS_USERNAME=admin export OS_PASSWORD=ipcc2014 export OS_AUTH_URL=http://controller:35357/v3 export OS_IDENTITY_API_VERSION=3 export OS_IMAGE_API_VERSION=2
gedit demo-openrc export OS_PROJECT_DOMAIN_NAME=Default export OS_USER_DOMAIN_NAME=Default export OS_PROJECT_NAME=demo export OS_USERNAME=demo export OS_PASSWORD=ipcc2014 export OS_AUTH_URL=http://controller:5000/v3 export OS_IDENTITY_API_VERSION=3 export OS_IMAGE_API_VERSION=2
. admin-openrc openstack token issue . demo-openrc openstack token issue |
// copy ‘admin-openrc’
// copy ‘demo-openrc’
|
// copy ‘admin-openrc’
// copy ‘demo-openrc’
|
Imageservice – Glance
Image service | ||
Controller | compute1 | compute2 |
/ Create a database su root // enter the root mode #mysql MariaDB [(none)]> CREATE DATABASE glance; GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' IDENTIFIED BY 'ipcc2014'; GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' IDENTIFIED BY 'ipcc2014';
. admin-openrc openstack user create --domain default --password-prompt glance openstack role add --project service --user glance admin openstack service create --name glance --description "OpenStack Image" p_w_picpath
openstack endpoint create --region RegionOne p_w_picpath public http://controller:9292 openstack endpoint create --region RegionOne p_w_picpath internal http://controller:9292 openstack endpoint create --region RegionOne p_w_picpath admin http://controller:9292
/ Install Glance sudo apt-get install glance
sudo gedit /etc/glance/glance-api.conf [database] connection = mysql+pymysql://glance:ipcc2014@controller/glance
[keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = glance password = ipcc2014
[paste_deploy] flavor = keystone
[glance_store] stores = file,http default_store = file filesystem_store_datadir = /var/lib/glance/p_w_picpaths/
sudo gedit /etc/glance/glance-registry.conf [database] connection = mysql+pymysql://glance:ipcc2014@controller/glance
[keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = glance password = ipcc2014
[paste_deploy] flavor = keystone
sudo su -s /bin/sh -c "glance-manage db_sync" glance sudo service glance-registry restart sudo service glance-api restart
/ Verify operation / Download the source p_w_picpath – ‘cirros’ wget http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img
/ Upload to p_w_picpath service using the QCOW2 disk format . admin-openrc openstack p_w_picpath create "cirros_0_3_3" --file cirros-0.3.3-x86_64-disk.img --disk-format qcow2 --container-format bare --public openstack p_w_picpath list | ||
Computeservice – Nova
Compute service | ||
Controller | compute1 | compute2 |
/ Create a database su root // enter the root mode #mysql MariaDB [(none)]> CREATE DATABASE nova_api; CREATE DATABASE nova; CREATE DATABASE nova_cell0;
GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'localhost' IDENTIFIED BY 'ipcc2014'; GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'%' IDENTIFIED BY 'ipcc2014'; GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'localhost' IDENTIFIED BY 'ipcc2014'; GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'%' IDENTIFIED BY 'ipcc2014'; GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'localhost' IDENTIFIED BY 'ipcc2014'; GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'%' IDENTIFIED BY 'ipcc2014';
. admin-openrc
openstack user create --domain default --password-prompt nova
openstack role add --project service --user nova admin
openstack service create --name nova --description "OpenStack Compute" compute
openstack endpoint create --region RegionOne compute public http://controller:8774/v2.1
openstack endpoint create --region RegionOne compute internal http://controller:8774/v2.1
openstack endpoint create --region RegionOne compute admin http://controller:8774/v2.1
openstack user create --domain default --password-prompt placement
openstack role add --project service --user placement admin
openstack service create --name placement --description "Placement API" placement
openstack endpoint create --region RegionOne placement public http://controller:8778
openstack endpoint create --region RegionOne placement internal http://controller:8778
openstack endpoint create --region RegionOne placement admin http://controller:8778
/ Install Nova sudo apt-get install nova-api nova-conductor nova-consoleauth nova-novncproxy nova-scheduler nova-placement-api
sudo gedit /etc/nova/nova.conf [api_database] connection = mysql+pymysql://nova:ipcc2014@controller/nova_api # connection=sqlite:var/lib/nova/nova.sqlite // comment out
[database] connection = mysql+pymysql://nova:ipcc2014@controller/nova
[DEFAULT] transport_url = rabbit://openstack:ipcc2014@controller my_ip = 10.0.0.11 use_neutron = True firewall_driver = nova.virt.firewall.NoopFirewallDriver #log_dir=/var/log/nova // comment out
[api] auth_strategy = keystone
[keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = nova password = ipcc2014
[vnc] enabled = true vncserver_listen = $my_ip vncserver_proxyclient_address = $my_ip
[glance] api_servers = http://controller:9292
[oslo_concurrency] lock_path = /var/lib/nova/tmp # lock_path=/var/lock/nova // comment out
[placement] os_region_name = RegionOne project_domain_name = Default project_name = service auth_type = password user_domain_name = Default auth_url = http://controller:35357/v3 username = placement password = ipcc2014 # os_region_name = openstack // comment out
sudo su -s /bin/sh -c "nova-manage api_db sync" nova sudo su -s /bin/sh -c "nova-manage cell_v2 map_cell0" nova sudo su -s /bin/sh -c "nova-manage cell_v2 create_cell --name=cell1 --verbose" nova sudo su -s /bin/sh -c "nova-manage db sync" nova sudo nova-manage cell_v2 list_cells
sudo service nova-api restart sudo service nova-consoleauth restart sudo service nova-scheduler restart sudo service nova-conductor restart sudo service nova-novncproxy restart
sudo ufw disable // open port 5672 for MQ server sudo ufw status
sudo su -s /bin/sh -c "nova-manage cell_v2 discover_hosts --verbose" nova | egrep -c '(vmx|svm)' /proc/cpuinfo 2
/ Install Nova sudo apt-get install nova-compute
sudo gedit /etc/nova/nova.conf
[DEFAULT] transport_url = rabbit://openstack:ipcc2014@controller my_ip = 10.0.0.31 use_neutron = True firewall_driver = nova.virt.firewall.NoopFirewallDriver #log_dir=/var/log/nova // comment out
[api] auth_strategy = keystone
[keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = nova password = ipcc2014
[vnc] enabled = True vncserver_listen = 0.0.0.0 vncserver_proxyclient_address = $my_ip novncproxy_base_url = http://controller:6080/vnc_auto.html
[glance] api_servers = http://controller:9292
[oslo_concurrency] lock_path = /var/lib/nova/tmp # lock_path=/var/lock/nova // comment out
[placement] os_region_name = RegionOne project_domain_name = Default project_name = service auth_type = password user_domain_name = Default auth_url = http://controller:35357/v3 username = placement password = ipcc2014 # os_region_name = openstack // comment out
[libvirt] hw_machine_type = "x86_64=pc-i440fx-xenial,i686=pc-i440fx-xenial"
sudo service nova-compute restart cat /var/log/nova/nova-compute.log | egrep -c '(vmx|svm)' /proc/cpuinfo 2
/ Install Nova sudo apt-get install nova-compute
sudo gedit /etc/nova/nova.conf
[DEFAULT] transport_url = rabbit://openstack:ipcc2014@controller my_ip = 10.0.0.32 use_neutron = True firewall_driver = nova.virt.firewall.NoopFirewallDriver #log_dir=/var/log/nova // comment out
[api] auth_strategy = keystone
[keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = nova password = ipcc2014
[vnc] enabled = True vncserver_listen = 0.0.0.0 vncserver_proxyclient_address = $my_ip novncproxy_base_url = http://controller:6080/vnc_auto.html
[glance] api_servers = http://controller:9292
[oslo_concurrency] lock_path = /var/lib/nova/tmp # lock_path=/var/lock/nova // comment out
[placement] os_region_name = RegionOne project_domain_name = Default project_name = service auth_type = password user_domain_name = Default auth_url = http://controller:35357/v3 username = placement password = ipcc2014 # os_region_name = openstack // comment out
[libvirt] hw_machine_type = "x86_64=pc-i440fx-xenial,i686=pc-i440fx-xenial"
sudo service nova-compute restart cat /var/log/nova/nova-compute.log
|
/ Verify operation . admin-openrc openstack hypervisor list openstack compute service list openstack catalog list sudo nova-status upgrade check | ||
Networkingservice – Neutron
Networking service | ||
controller | compute1 | compute2 |
/ Create a database su root // enter the root mode #mysql MariaDB [(none)]> CREATE DATABASE neutron; GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost'IDENTIFIED BY 'ipcc2014'; GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'%'IDENTIFIED BY 'ipcc2014';
. admin-openrc
openstack user create --domain default --password-prompt neutron openstack role add --project service --user neutron admin openstack service create --name neutron --description "OpenStack Networking" network
openstack endpoint create --region RegionOne network public http://controller:9696 openstack endpoint create --region RegionOne network internal http://controller:9696 openstack endpoint create --region RegionOne network admin http://controller:9696
/ Install Neutorn sudo apt-get install neutron-server neutron-plugin-ml2 neutron-linuxbridge-agent neutron-l3-agent neutron-dhcp-agent neutron-metadata-agent
sudo gedit /etc/neutron/neutron.conf [database] connection = mysql+pymysql://neutron:ipcc2014@controller/neutron # connection = sqlite:var/lib/neutron/neutron.sqlite // comment out
[DEFAULT] core_plugin = ml2 service_plugins = router allow_overlapping_ips = true transport_url = rabbit://openstack:ipcc2014@controller auth_strategy = keystone notify_nova_on_port_status_changes = true notify_nova_on_port_data_changes = true
[keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = ipcc2014
[nova] auth_url = http://controller:35357 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = nova password = ipcc2014
sudo gedit /etc/neutron/plugins/ml2/ml2_conf.ini [ml2] type_drivers = flat,vlan,vxlan tenant_network_types = vxlan mechanism_drivers = linuxbridge,l2population extension_drivers = port_security
[ml2_type_flat] flat_networks = provider [ml2_type_vxlan] vni_ranges = 1:1000
[securitygroup] enable_ipset = true
sudo gedit /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge] physical_interface_mappings = provider:eth1
[vxlan] enable_vxlan = true local_ip = 10.0.0.11 l2_population = true
[securitygroup] enable_security_group = true firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
sudo gedit /etc/neutron/l3_agent.ini [DEFAULT] interface_driver = linuxbridge
sudo gedit /etc/neutron/dhcp_agent.ini [DEFAULT] interface_driver = linuxbridge dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq enable_isolated_metadata = true
sudo gedit /etc/neutron/metadata_agent.ini [DEFAULT] nova_metadata_ip = controller metadata_proxy_shared_secret = ipcc2014
sudo gedit /etc/nova/nova.conf [neutron] url = http://controller:9696 auth_url = http://controller:35357 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = ipcc2014 service_metadata_proxy = true metadata_proxy_shared_secret = ipcc2014
sudo su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf \ --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron
sudo service nova-api restart
sudo service neutron-server restart sudo service neutron-linuxbridge-agent restart sudo service neutron-dhcp-agent restart sudo service neutron-metadata-agent restart
sudo service neutron-l3-agent restart
|
/ Install Neutorn sudo apt-get install neutron-linuxbridge-agent
sudo gedit /etc/neutron/neutron.conf [database]
# connection = sqlite:var/lib/neutron/neutron.sqlite // comment out
[DEFAULT] transport_url = rabbit://openstack:ipcc2014@controller auth_strategy = keystone
[keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = ipcc2014
sudo gedit /etc/neutron/plugins/ml2/linuxbridge_agent.ini [linux_bridge] physical_interface_mappings = provider:eth1
[vxlan] enable_vxlan = true local_ip = 10.0.0.31 l2_population = true
[securitygroup] enable_security_group = true firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
sudo gedit /etc/nova/nova.conf [neutron] url = http://controller:9696 auth_url = http://controller:35357 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = ipcc2014
sudo service nova-compute restart sudo service neutron-linuxbridge-agent restart |
/ Install Neutorn sudo apt-get install neutron-linuxbridge-agent
sudo gedit /etc/neutron/neutron.conf [database]
# connection = sqlite:var/lib/neutron/neutron.sqlite // comment out
[DEFAULT] transport_url = rabbit://openstack:ipcc2014@controller auth_strategy = keystone
[keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = ipcc2014
sudo gedit /etc/neutron/plugins/ml2/linuxbridge_agent.ini [linux_bridge] physical_interface_mappings = provider:eth1
[vxlan] enable_vxlan = true local_ip = 10.0.0.32 l2_population = true
[securitygroup] enable_security_group = true firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
sudo gedit /etc/nova/nova.conf [neutron] url = http://controller:9696 auth_url = http://controller:35357 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = ipcc2014
sudo service nova-compute restart sudo service neutron-linuxbridge-agent restart |
/ Verify operation . admin-openrc openstack extension list --network openstack network agent list | ||
Dashboard- Horizon
Dashboard | ||
Controller | compute1 | compute2 |
/ Install Horizon sudo apt-get install openstack-dashboard
sudo gedit /etc/openstack-dashboard/local_settings.py
#OPENSTACK_HOST = "127.0.0.1" // comment out OPENSTACK_HOST = "controller"
ALLOWED_HOSTS = ['*', ] // at the beginning, not Ubuntu Settings
SESSION_ENGINE = 'django.contrib.sessions.backends.cache' // the memcached session CACHES = { 'default': { 'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache', 'LOCATION': 'controller:11211', } }
#OPENSTACK_KEYSTONE_URL = "http://%s:5000/v2.0" % OPENSTACK_HOST // comment out OPENSTACK_KEYSTONE_URL = "http://%s:5000/v3" % OPENSTACK_HOST
#OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False // comment out OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = True
OPENSTACK_API_VERSIONS = { "identity": 3, "p_w_picpath": 2, "volume": 2, }
#OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = 'Default' // comment out OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = "Default"
#OPENSTACK_KEYSTONE_DEFAULT_ROLE = "_member_" // comment out OPENSTACK_KEYSTONE_DEFAULT_ROLE = "user"
OPENSTACK_NEUTRON_NETWORK = { # 'enable_router': True, # 'enable_quotas': True, # 'enable_ipv6': True, # 'enable_distributed_router': False, # 'enable_ha_router': False, # 'enable_lb': True, # 'enable_firewall': True, # 'enable_***': True, # 'enable_fip_topology_check': True, // comment out 'enable_router': True, 'enable_quotas': False, 'enable_ipv6': False, 'enable_distributed_router': False, 'enable_ha_router': False, 'enable_lb': False, 'enable_firewall': False, 'enable_***': False, 'enable_fip_topology_check': False,
TIME_ZONE = "UTC"
sudo chown www-data:www-data /var/lib/openstack-dashboard/secret_key
sudo gedit /etc/apache2/conf-available/openstack-dashboard.conf WSGIApplicationGroup %{GLOBAL}
sudo service apache2 reload
/ Verify operation default/admin/ipcc2014 default/demo/ipcc2014 | ||
转载于:https://blog.51cto.com/8493144/1977139
2万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
