本文记录了一位用户在群晖RAID1阵列出现问题后，使用Ubuntu尝试恢复的过程。通过`sudo mdadm --stop /dev/md3`停止设备，并使用`sudo mdadm --assemble --scan --verbose`扫描设备，但未能找到超级块，导致恢复失败。文章揭示了在没有备份的情况下恢复RAID1的复杂性和挑战。
[email protected]:~# sudo mdadm --stop /dev/md3
mdadm: stopped /dev/md3
[email protected]:~# sudo mdadm --assemble --scan --verbose
mdadm: looking for devices for /dev/md/3
mdadm: No super block found on /dev/sdb2 (Expected magic a92b4efc, got 00000000)
mdadm: no RAID superblock on /dev/sdb2
mdadm: No super block found on /dev/sdb1 (Expected magic a92b4efc, got 00000131)
mdadm: no RAID superblock on /dev/sdb1
mdadm: No super block found on /dev/sdb (Expected magic a92b4efc, got 00000000)
mdadm: no RAID superblock on /dev/sdb
mdadm: No super block found on /dev/loop8 (Expected magic a92b4efc, got e5545a99)
mdadm: no RAID superblock on /dev/loop8
mdadm: No super block found on /dev/sdc2 (Expected magic a92b4efc, got 03402401)
mdadm: no RAID superblock on /dev/sdc2
mdadm: No super block found on /dev/sdc1 (Expected magic a92b4efc,
最低0.47元/天 解锁文章
扫一扫
9062
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
