Asterisk的拨号函数/命令是Dial，下面就介绍一下这个函数的用法。
Dial()
摘要
在一个通道上发起一个新的外拨呼叫，然后把它连接到当前通道上。
语法
Dial(type/identifier, timeout, options, URL)
或
Dial(type1/identifier1[&type2/identifier2[&type3/identifier3... ] ], timeout, options, URL)
或
RetryDial(announce|sleep|loops|Technology/resource[&Technology2/resource2...][|[timeout][|[options][|URL]]])
说明：
同时外呼所有指定的通道，第一个应答的通道将占用，其他通道挂机，然后触发Dial命令的通道被应答（Answered），按照需要把两条通道连接起来。触发Dial命令的通道挂机后，将退出Dial命令。
在成功连接两个通道后，如果Dial函数的参数里有g 和 G，那么不会继续执行余下的流程。如果连接失败，那么可以跳转到下一个流程，或j参数指定的节点。
参数说明
A(x): Play an announcement (x.gsm) to the called party.
C: Reset the CDR (Call Detail Record) for this call. This is like using the NoCDR command
c: Sets the channel driver flag that the "call is answered elsewhere" if Dial() cancels the call
D(digits): After the called party answers, send digits as a DTMF stream, then connect the call to the originating channel (you can also use 'w' to produce .5 second pauses). You can also provide digits after a colon - all digits before the colon are sent to the called channel, all digits after the colon are sent to the calling channel (all digits are sent to the called channel if there is no colon present).
d: This flag trumps the 'H' flag and intercepts any single DTMF tone while waiting for the call to be answered and jumps to that extension if it exists. This allows you to dial a 1-digit exit extension while waiting for the call to be answered - see also RetryDial. This uses the current context unless ${EXITCONTEXT} is defined.
e: Execute "h" as the peer when this call ends
F(context^exten^pri): When the caller hangs up, transfer the called party to the specified context and extension and continue execution.
f: forces callerid to be set based on a dialplan "hint" for the current channel. For example, some PSTNs don't allow callerids from other extensions than the ones that are assigned to you.
G(context^exten^pri): If the call is answered, transfer both parties to the specified context and extension. The calling party is transferred to priority x, and the called party to priority x+1. This allows the dialplan to distinguish between the calling and called legs of the call (new in v1.2). You cannot use any options that would affect the post-answer state if this option is used.
g: When the called party hangs up, continue to execute commands in the current context at the next priority.
H: Allow the caller to hang up by dialing * ( * is defined in features.conf -> featuremap -> disconnect )
h: Allow the callee to hang up by dialing * ( * is defined in features.conf -> featuremap -> disconnect )
i: Asterisk will ignore any forwarding requests it may receive on this dial attempt. (new in 1.4) Useful if you are ringing a group of people and one person has set their phone to forwarded direct to voicemail on their cell or something which normally prevents any of the other phones from ringing.
j: Asterisk 1.2 and later (1.6???): Jump to priority n+101 if all of the requested channels were busy (just like behaviour in Asterisk 1.0.x)
K: Allow the calling party to enable parking of the call by sending the DTMF sequence defined for call parking in features.conf (Asterisk v1.4.x)
k: Allow the called party to enable parking of the call by sending the DTMF sequence defined for call parking in features.conf (Asterisk v1.4.x)
L(x[:y][:z]): Limit the call to 'x' ms, warning when 'y' ms are left, repeated every 'z' ms) Only 'x' is required, 'y' and 'z' are optional. Numbers must be integers- beware of AGI scripts that may return long integers in scientific notation (esp PHP 5.2.5&6) The following special variables are optional for limit calls: (pasted from app_dial.c)
LIMIT_PLAYAUDIO_CALLER - yes|no (default yes) - Play sounds to the caller.
LIMIT_PLAYAUDIO_CALLEE - yes|no - Play sounds to the callee.
LIMIT_TIMEOUT_FILE - File to play when time is up.
LIMIT_CONNECT_FILE - File to play when call begins.
LIMIT_WARNING_FILE - File to play as warning if 'y' is defined. If LIMIT_WARNING_FILE is not defined, then the default behaviour is to announce ("You have [XX minutes] YY seconds").
M(x): Executes the macro (x) upon connect of the call (i.e. when the called party answers). See also U. IMPORTANT - The CDR 'billsecs' field is set to zero if the callee answers the call, but hangs up whilst the macro is still running (if the callee answers and the macro finishes, 'billsecs' contains the correct value). The macro can set ${MACRO_RESULT} to the following:
ABORT: Hang up both legs
CONGESTION: Signal congestion to the caller
BUSY: Signal busy to the caller
CONTINUE: Hangup the called party but continue execution at the next priority in the dialplan for the caller
GOTO: Transfer the execution to context^exten^pri
m: Provide Music on Hold to the calling party until the called channel answers. This is mutually exclusive with option 'r', obviously. Use m(class) to specify a class for the music on hold.
N: Modifies the privacy manager - turns off call screening if caller ID information is present
n(delete): (Asterisk 1.6) If delete is 0 or not specified, delete the privacy manager introduction if the caller hangs up before the call is answered. If set to 1, delete the recording even if the call is answered.
O(mode): If mode is set to 1 or isn't specified, ringback immediately if the originator hangs up. If mode is set to 2, ring back when the operator flashes the trunk. This is only valid when the caller and called channels are DAHDI channels. It is intended for calling an operator station.
o: Restore the Asterisk v1.0 CallerId behaviour (send the original caller's ID) in Asterisk v1.2 (default: send this extension's number)
P(x): Use the PrivacyManager, using x as the database (x is optional and will default to the current extension)
p: This option enables screening mode. This is basically Privacy mode without memory of how to handle the caller. It looks for the file sounds/priv-callerintros/${IF($[ "${CALLERID(num)}" != "" ]?${CALLERID(num)}:NOCALLERID_${EXTEN}${CUT(CHANNEL,/,1)}=${CUT(CHANNEL,/,2)})}.gsm and if it is not found, prompts the caller to say his name. It then rings the called party and plays sounds/priv-callpending, sounds/priv-callerintros/<see-above>, and sounds/screen-callee-options. If the called party enters 1, the call is accepted, 2, the DIAL command exits with ${DIALSTATUS} set to NOANSWER, 3, set to TORTURE and 4, set to DONTCALL. If no valid entry is made, the DIAL command exits with ${DIALSTATUS} set to ANSWER. The check for pre-existence of the name recording may not be what you want. For example, everyone from the same number is not necessarily the same person, especially if the number is OUTOFAREA, but if the file is there, no new name will be recorded. Since the files are never removed, you may wish to remove them with a System(rm /var/lib/asterisk/sounds/priv-callerintros/${IF($[ "${CALLERID(num)}" != "" ]?${CALLERID(num)}:NOCALLERID_${EXTEN}${CUT(CHANNEL,/,1)}=${CUT(CHANNEL,/,2)})}.*) right before the Dial command and clean up old ones with a cron job.
R: Indicate ringing to the calling party when the called party indicates ringing, pass no audio until answered. This is available only if you are using kapejod's Bristuff.
r: Generate a ringing tone for the calling party, passing no audio from the called channel(s) until one answers. Without this option, Asterisk will generate ring tones automatically where it is appropriate to do so; however, "r" will force Asterisk to generate ring tones, even if it is not appropriate. For example, if you used this option to force ringing but the line was busy the user would hear "RING RIBEEP BEEP BEEP" (thank you tzanger), which is potentially confusing and/or unprofessional. However, the option is necessary in a couple of places. For example, when you're dialing multiple channels, call progress information is not consistantly passed back. Look at Progress(), the progressinband setting in sip.conf orRinging() if you would like to avoid the use of 'r' but have issues with the ringback behaviour of Dial().
S(n): Hangup the call n seconds AFTER called party picks up.
T: Allow the calling user to transfer the call by hitting the blind xfer keys (features.conf). Does not affect transfers initiated through other methods.
If you have set the variable GOTO_ON_BLINDXFR then the transferrer will be sent to the context|exten|pri (you can use ^ to represent | to avoid escapes), example: SetVar(GOTO_ON_BLINDXFR=woohoo^s^1); works with both t and T
t: Allow the called user to transfer the call by hitting the blind xfer keys (features.conf) Does not affect transfers initiated through other methods.
If you have set the variable GOTO_ON_BLINDXFR then the transferrer will be sent to the context|exten|pri (you can use ^ to represent | to avoid escapes), example: SetVar(GOTO_ON_BLINDXFR=woohoo^s^1); works with both t and T
U(x): Executes, via gosub, routine x on the called channel. This is similar to M above, but a gosub rather than a macro. The subroutine can set${GOSUB_RESULT}__ to the following:
ABORT: Hang up both legs
CONGESTION: Signal congestion to the caller
BUSY: Signal busy to the caller
CONTINUE: Hangup the called party but continue execution at the next priority in the dialplan for the caller
GOTO: Transfer the execution to context^exten^pri
W: Allow the calling user to start recording after pressing *1 or what defined in features.conf (Asterisk v1.2.x); requires Set(DYNAMIC_FEATURES=automon)
w: Allow the called user to start recording after pressing *1 or what defined in features.conf (Asterisk v1.2.x); requires Set(DYNAMIC_FEATURES=automon)
X: Allow the calling user to start recording using automixer after pressing *1 or what defined in features.conf (Asterisk v1.6)
x: Allow the called user to start recording using automixer after pressing *1 or what defined in features.conf (Asterisk v1.6)
Examples
Example 1: Simple use case
exten => 1265,1,Dial(Phone/phone0,15)
exten => s,3,Dial(SIP/oej,20)
exten => _908.,1,Dial(Modem/ttyI0:${EXTEN:1})
exten => 233,1,Dial(SIP/4029&SIP/4027&Zap/4&IAX/jaz,15,tTr)
exten => 500,1,Dial(Zap/2r2,20,crh)
exten => 20,1,Dial(Zap/3/5551234)
Dial macros
Introduced in/for Asterisk 1.2, see bug/patch 2905
You can now add args to the macro by using a '^' char:
Dial(Zap/1|60|M(mymacro^cat^dog^bark))
Also, the macro can set the MACRO_RESULT variable to do the following:
ABORT - Hangup both legs of the call
BUSY
CONTINUE - Hangup the called party and continue on in the dialplan from where you called Dial
GOTO:<context>^<exten>^<priority> - Transfer the call.
Note: If you want the call to be bridged upon completion of the macro, you should NOT set the MACRO_RESULT variable to anything. IF MACRO_RESULT is not defined, the thread of execution falls off the end of the macro and bridges the call. Setting it to CONTINUE causes the call NOT to be bridged, and execution to resume at n+1 priority in the calling context. Of course setting it to BUSY or GOTO has the implied results (and of course the call is not bridged).
(I found this a bit confusing because my mental model expected some kind of explicit case for "bridge the call", such as setting MACRO_RESULT to "BRIDGE" or "CONNECT" or something like that. It's the ABSENCE of any value that causes the call to be bridged.)
Example 2: Dial macro
screen-record: Please record your name press pound when finished.
screen-from: You have a call from
screen-accept: Press 1 to accept this call or any other key to reject.
exten => 890,1,Wait(0.2)
exten => 890,n,Playback(screen-record)
exten => 890,n,SetVar(SCREEN_FILE=/tmp/${CALLERID(number)}-${EPOCH})
exten => 890,n,Record(${SCREEN_FILE}.gsm|6|25)
exten => 890,n,Dial(SIP/16|60|gM(screen^${SCREEN_FILE}))
exten => 890,n,Voicemail(10@default)
[macro-screen]
exten => s,1,Wait(0.2)
exten => s,n,Playback(screen-from)
exten => s,n,Playback(${ARG1})
exten => s,n,Read(ACCEPT|screen-accept|1)
exten => s,n,GotoIf($[${ACCEPT} = 1 ] ?yes:no)
exten => s,n(yes),SetVar(MACRO_RESULT=CONTINUE)
exten => s,n(no),System(/bin/rm ${ARG1})
Notes:
Do not put spaces between the arguments to the Dial command, it will not work.
When options t, T", "h", "H", "w", "W" or "L" (with multiple arguments) are applied, Asterisk will remain in the media path, even if canreinvite=yes'' (a SIP channel option) has been specified.
Return codes
Dial sets DIALSTATUS to indicate its success or failure. However, under some circumstances, execution will jump to priority n+101 in the current context. This happens when:
All channels dialed were busy
There is exists something at n+101 in the current context
You are running asterisk 1.0.x, priorityjumping=yes is set in extensions.conf, or the j option is specificed in the dial command
Note that in Asterisk v1.2+ priorityjumping is considered "off" by default, which is a change from previous versions.
If the g option is specified, and the called party hangs up before the calling party, then Dial continues execution at priority n+1.
Do Progress() before calling Dial() if you want asterisk to go in-band (in order to use playtones configured in indications.conf etc.). In some cases you may have to use Answer(), but that is to be avoided because it "charges", prevents auto-redial, etc.
Note: The bristuff patches change the dial behaviour slightly and jump to n+201 if the dialed destination isn't connected (e.g. a SIP softphone is not up and running, or hasn't registered).
DIALSTATUS - For more details see Asterisk Variable DIALSTATUS
${DIALSTATUS} will be one of:
CHANUNAVAIL : Channel unavailable (for example in sip.conf, when using qualify=, the SIP chan is unavailable)
BUSY : Returned busy
NOANSWER : No Answer (i.e SIP 480 or 604 response)
ANSWER : Call was answered
CANCEL : Call attempt cancelled (i.e user hung up before the call connected)
DONTCALL : Privacy manager don't call
TORTURE : Privacy manager torture menu
CONGESTION : Means Congestion, or anything else (some other error setting up the call)
Example 3: Dial multiple channels, partially delayed
Idea: Make a special extension where you could provide the delay and the numbers you want to dial, for example:
exten => _900XXXXX,1,Wait(${EXTEN:3:2})
exten => _900XXXXX,2,Dial(SIP/${EXTEN:5})
Then in the incoming context you could use the Local channel construct and dial:
exten => s,1,Dial(SIP/200&SIP/201&LOCAL/90015300&LOCAL/90015301)
In the above example 200 and 201 extension will ring immediately, and 300 and 301 will start ringing after 15 seconds. After to 900 the first two digits are for the delay before start ringing and the last three are the extension that should be called. The trick here is that instead of simply using two Dial statements after each other we make sure we ring each phone only once; that prevents a) potential problems with SIP devices needing some wrap up time before being able to take another call, and b) avoids too many "missed call" entires in the phone's interface.
Look at ForkCDR and/or ResetCDR if you are not happy with the resulting CDRs of this example.
Example 4: Answering machine (by dsfr aka Chris Hozian)
Can be used for home answering machine with call screen. Provides CallerID to handset even if you don't pay for CallerID. Must associate CID name with number in Asterisk database in order to work.
[from-iax-fwd]
exten => night-mode,1,WaitForRing(30)
exten => night-mode,n,Goto(s|night-mode-start)
exten => ${FWD-HOME-NUMBER},1,Set(INVALID-PRIVACY-TRIES=0) ; used for determining number of invalid tries used during privacymanager.
exten => ${FWD-HOME-NUMBER},n,Set(TIMEOUT(response)=20)
exten => ${FWD-HOME-NUMBER},n,Set(TIMEOUT(digit)=7)
exten => ${FWD-HOME-NUMBER},n,SetMusicOnHold(default)
exten => ${FWD-HOME-NUMBER},n,GotoIfTime(20:00-7:59|*|*|*?night-mode|1)
exten => ${FWD-HOME-NUMBER},n,Answer
exten => ${FWD-HOME-NUMBER},n,Wait(2)
exten => ${FWD-HOME-NUMBER},n,Zapateller
exten => ${FWD-HOME-NUMBER},n,Goto(skip-night-mode)
exten => ${FWD-HOME-NUMBER},n(night-mode-start),Answer
exten => ${FWD-HOME-NUMBER},n,Wait(2)
exten => ${FWD-HOME-NUMBER},n(skip-night-mode),Playback(dsfr-hozian-residence) ; welcome the caller.
exten => ${FWD-HOME-NUMBER},n,Playback(dsfr-greeting) ; welcome the caller.
exten => ${FWD-HOME-NUMBER},n,NoOp(Pre Privacy Manager Number ${CALLERID})
exten => ${FWD-HOME-NUMBER},n(privacy-manager),PrivacyManager
exten => ${FWD-HOME-NUMBER},s+101,GotoIf($[${INVALID-PRIVACY-TRIES} = ${MAX-PRIVACY-TRIES}] ?i|1)
exten => ${FWD-HOME-NUMBER},n,Playback(dsfr-privacy-invalid) ; explain that # is not valid and that 10 digits must be entered.
exten => ${FWD-HOME-NUMBER},n,Set(INVALID-PRIVACY-TRIES=$[${INVALID-PRIVACY-TRIES} + 1])
exten => ${FWD-HOME-NUMBER},n,Goto(privacy-manager)
exten => ${FWD-HOME-NUMBER},privacy-manager+1,NoOp(Post Privacy Manager Number ${CALLERID})
exten => ${FWD-HOME-NUMBER},n,LookupCIDName
exten => ${FWD-HOME-NUMBER},n,NoOp(Post LookupCIDName ${CALLERID})
exten => ${FWD-HOME-NUMBER},n,Playback(pls-rcrd-name-at-tone)
exten => ${FWD-HOME-NUMBER},n,Playback(and-prs-pound-whn-finished)
exten => ${FWD-HOME-NUMBER},n,Set(SCREEN-FILE=/var/lib/asterisk/tmp/${TIMESTAMP}-${CALLERIDNUM})
exten => ${FWD-HOME-NUMBER},n,Record(${SCREEN-FILE}.gsm|${SILENCE-SECONDS}|${SCREEN-FILE-SECONDS})
exten => ${FWD-HOME-NUMBER},n,Playback(this-call-may-be-monitored-or-recorded)
exten => ${FWD-HOME-NUMBER},n,Playback(pls-hold-while-try)
exten => ${FWD-HOME-NUMBER},n,Dial(${PHONE-1}|${INCOMING-RING-SECONDS}|gmM(from-iax-fwd-screen^${SCREEN-FILE}^${UNIQUEID}^${CALLERIDNUM}))
exten => ${FWD-HOME-NUMBER},n,GotoIf($[${${UNIQUEID}} = 1] ?hangup) ; checks whether bypass voicemail option is set in macro-from-iax-fwd-screen.
exten => ${FWD-HOME-NUMBER},n(from-iax-fwd-ivr),System(/bin/rm ${SCREEN-FILE}.gsm)
exten => ${FWD-HOME-NUMBER},n,Goto(from-iax-fwd-ivr|s|1)
exten => ${FWD-HOME-NUMBER},n(hangup),System(/bin/rm ${SCREEN-FILE}.gsm)
exten => ${FWD-HOME-NUMBER},n,Hangup
exten => i,1,System(/bin/rm ${SCREEN-FILE}.gsm)
exten => i,n,Playback(call-terminated)
exten => i,n,Playback(goodbye)
exten => i,n,Hangup
exten => t,1,System(/bin/rm ${SCREEN-FILE}.gsm)
exten => t,n,Playback(call-terminated)
exten => t,n,Playback(goodbye)
exten => t,n,Hangup
exten => h,1,System(/bin/rm ${SCREEN-FILE}.gsm)
[macro-from-iax-fwd-screen]
exten => s,1,Set(MACRO_RESULT=GOTO:from-iax-fwd^${FWD-HOME-NUMBER}^from-iax-fwd-ivr)
exten => s,n,Set(TIMEOUT(response)=15)
exten => s,n,Playback(call)
exten => s,n,Playback(from)
exten => s,n(repeat-screen),Playback(${ARG1})
exten => s,n(repeat-options),Read(ACCEPT-CALL|dsfr-macro-from-iax-fwd-options|1)
exten => s,n,GotoIf($["${ACCEPT-CALL}" = ""] ?t|1)
exten => s,n,GotoIf($[${ACCEPT-CALL} = 1] ?call-accepted)
exten => s,n,GotoIf($[${ACCEPT-CALL} = 5] ?repeat-screen)
exten => s,n,GotoIf($[${ACCEPT-CALL} = 9] ?call-declined:repeat-options)
exten => s,n(call-declined),Playback(dsfr-screen-declined) ; declined - caller will be sent to ivr.
exten => s,n,GotoIf($[${MACRO_RESULT} = GOTO:from-iax-fwd^${FWD-HOME-NUMBER}^from-iax-fwd-ivr] ?skip-monitor)
exten => s,n(call-accepted),Playback(dsfr-screen-accepted) ; accepted - call will be bridged momentarily.
exten => s,n,Set(MACRO_RESULT=)
exten => s,n,Set(${ARG2}=1|g) ; if set to 1 then bypass voicemail.
exten => s,n,Playback(this-call-may-be-monitored-or-recorded)
exten => s,n,Monitor(wav49|${TIMESTAMP}-${ARG3}|mb)
exten => s,n(skip-monitor),NoOp
exten => t,1,Playback(connection-timed-out)
exten => t,n,Goto(s|call-declined)
[from-iax-fwd-ivr]
exten => s,1,Set(INVALID-IVR-TRIES=0) ; used for determining number of invalid tries used during ivr.
exten => s,n,Set(RETRIES-FWD-WORK=0) ; used for determining number of retry attempts when calling fwd home.
exten => s,n,Set(RETRIES-WEATHER-SERVICE=0) ; used for determing number of retry attempts when checking weather service.
exten => s,n,Set(RETRIES-VOICEMAIL=0) ; used for determing number of retry attempts when checking voicemail.
exten => s,n,Set(TIMEOUT(response)=20)
exten => s,n,Set(TIMEOUT(digit)=7)
exten => s/1000,n,Background(dsfr-personalized-greeting-test1)
exten => s/0123456789,s,Background(dsfr-personalized-greeting-test2)
exten => s/123456789,s,Background(dsfr-personalized-greeting-test2)
exten => s/0987654321,s,Background(dsfr-personalized-greeting-test3)
exten => s/987654321,s,Background(dsfr-personalized-greeting-test3)
exten => s,s,NoOp(This caller does not have a personalized greeting.)
exten => s,n(ivr-options),Background(dsfr-from-iax-fwd-ivr) ; provide various ivr options excluding voicemail and admin-auth extensions.
exten => s,n,WaitExten
exten => 1,1,Voicemail(${PERSONAL-1-VMBOX}|u)
exten => 2,1,Voicemail(${PERSONAL-2-VMBOX}|u)
exten => 3,1,Playback(dsfr-ivr-fwd-info) ; explain that fwd work phone is experimental, will ring for 90 seconds, then come back to ivr.
exten => 3,n,SetCallerId(${FWD-HOME-CID})
exten => 3,n,Monitor(wav49|${TIMESTAMP}-${CALLERIDNUM}-FWD-WORK|mb)
exten => 3,n,Dial(IAX2/to-iax-fwd/${FWD-WORK-NUMBER}|${OUTGOING-RING-SECONDS}|rg)
exten => 3,n,Macro(from-iax-fwd-ivr-retries|RETRIES-FWD-WORK)
exten => 4,1,Playback(dsfr-weather-service) ; explain that there will be a pause while the Huntsville, AL weather information is downloaded.
exten => 4,n,System(/usr/bin/curl -s ftp://weather.noaa.gov/data/forecasts/city/al/huntsville.txt > /var/lib/asterisk/tmp/weather.txt)
exten => 4,n,System(/usr/bin/text2wave /var/lib/asterisk/tmp/weather.txt -F 8000 -o /var/lib/asterisk/tmp/weather.wav)
exten => 4,n,Playback(/var/lib/asterisk/tmp/weather)
exten => 4,n,Macro(from-iax-fwd-ivr-retries|RETRIES-WEATHER-SERVICE)
exten => 9,1,Playback(dsfr-emergency-phone-info) ; explain that emergency phone will ring for 90 seconds then come back to ivr.
exten => 9,n,Monitor(wav49|${TIMESTAMP}-${CALLERIDNUM}-EMERGENCY|mb)
exten => 9,n,Dial(${PHONE-1}${EMERGENCY-RING-TONE}|${EMERGENCY-RING-SECONDS}|r)
exten => 9,n,Goto(s|ivr-options)
exten => 8500,1,VoicemailMain
exten => 8500,n,Macro(from-iax-fwd-ivr-retries|RETRIES-VOICEMAIL)
exten => i,1,GotoIf($[${INVALID-IVR-TRIES} = ${MAX-IVR-INVALID-TRIES}] ?from-iax-fwd|i|1)
exten => i,n,Playback(invalid)
exten => i,n,Set(INVALID-IVR-TRIES=$[${INVALID-IVR-TRIES} + 1])
exten => i,n,Goto(s|ivr-options)
exten => t,1,Goto(from-iax-fwd|t|1)
exten => h,1,Goto(from-iax-fwd|h|1)
[macro-from-iax-fwd-ivr-retries]
exten => s,1,GotoIf($[${${ARG1}} = ${MAX-IVR-RETRIES}] ?from-iax-fwd|i|1)
exten => s,n,Set(${ARG1}=$[${${ARG1}} + 1])
exten => s,n,Goto(from-iax-fwd-ivr|s|ivr-options)
See also voicemail live: Listen to incoming caller during voicemail recording
Example 5: Using Bristuff
If you are using kapejod's Bristuff, you will have a n + 201 priority as well. Dial goes to this priority if no one is logged in on the called extension. I.e. giving an unavailable message instead of a busy message when no phone is connected to the extension.
exten => 4000,1,Dial(SIP/${EXTEN},15)
exten => 4000,2,Voicemail(u${EXTEN})
exten => 4000,102,Voicemail(b${EXTEN})
exten => 4000,202,Voicemail(u${EXTEN})
Example 6: Using IAX2 friends
I keep forgeting how to set this up, so I wanted to contribute a good example to explain the syntax a little clearer and make this information easier to find. I'm going to give example excerpts from iaxhost1's and iaxhost2's iax.conf and extensions.conf files. I'm going to use names that are fairly generic but very unique to this example. I also have instructions on how to do this with Asterisk@Home (at least with 2.5) (now known as TrixBox), so please pay attention.
Excerpt from iaxhost1's iax.conf:
[value1]
type=friend
secret=value2 ; <-- VERY important with friend types to get this to work properly
auth=plaintext
host=172.16.5.1 ; Example private address space
context=iaxhost2-in ; Always nice to be able to control access rights.
qualify=yes ; Optional, but usually a good idea.
... ; Whatever else you want including allow/disallow for codecs.
Excerpt from iaxhost2's iax.conf:
[value3]
type=friend
secret=value4 ; <-- VERY important with friend types to get this to work properly
auth=plaintext
host=172.16.5.2 ; Example private address space
context=iaxhost1-in ; Always nice to be able to control access rights.
qualify=yes ; Optional, but usually a good idea.
... ; Whatever else you want including allow/disallow for codecs.
Excerpt from iaxhost1's extensions.conf
[default]
...
include => iaxhost1-out ; Always a good idea to seperate contexts
...
[iaxhost2-in]
exten => 99104,1,DateTime() ; DateTime() is always good for testing
exten => 98104,1,NoOp(${EXTEN})
exten => 98104,2,DateTime() ; DateTime() is always good for testing
[iaxhost1-out]
exten => 99205,1,Dial(IAX2/value3:value4@value1/99105)
; A more complicated extension example:
exten => 982XX,1,Dial(IAX2/value3:value4@value1/991${EXTEN:3})
Excerpt from iaxhost2's extensions.conf
[default]
...
include => iaxhost2-out ; Always a good idea to seperate contexts
...
[iaxhost1-in]
exten => 99105,1,DateTime() ; DateTime() is always good for testing
exten => 98105,1,NoOp(${EXTEN})
exten => 98105,2,DateTime() ; DateTime() is always good for testing
For asterisk 1.2:
[iaxhost2-out]
exten => 99204,1,Dial(IAX2/value1:value2@value3/99104)
; A more complicated extension example:
exten => 982XX,1,Dial(IAX2/value1:value2@value3/991${EXTEN:3})
For asterisk 1.6 the DIAL cmd parameters have the pattern IAX2/[username[:password]@]peer[:port]/extension[@context]/options, so:
[iaxhost2-out]
exten => 99204,1,Dial(IAX2/value1/99104)
; A more complicated extension example:
exten => 982XX,1,Dial(IAX2/value1/991${EXTEN:3})
Using IAX2 friends with Asterisk@Home AMP
The way I propose the solution here may seem a little strange. If there is a better way (without using peer/user) to do this with A@H AMP, edit this section and fix it!
For the purposes of this example, We're going to iax to iaxhost2 with A@H being iaxhost1.
Ok, start up your AMP web portal and go into Setup (enter username and password as appropriate).
Go into your trunks and Add IAX2 Trunk. This trunk will NEVER be used in Outbound Routing. This trunk is merely a placeholder so it can be used by the custom trunk below.
Don't worry about Outgoing Dial Rules for now, we'll worry about that later.
In the Outgoing Settings section set the Trunk Name to value1.
Put the contents of the [value1] heading (from above) in the PEER Details
Change the line context=iaxhost2-in to context=from-internal
Remove everything from the USER Details textbox.
No other settings should need to be adjusted, so we'll Submit Changes now.
Now we need to Add Custom Trunk.
Setup the Outgoing Dial Rules here. We're going to just enter 99205 & 982XX; each on their own line.
Enter the Custom Dial String as IAX2/value3:value4@value1/$OUTNUM$
(Optional) Setup any of the other fields that you didn't in the previous trunk now.
Now we can Submit Changes to save this custom trunk.
Time to setup Outbound Routing.
Enter iaxhost2-ext as the Route Name. Leave the Route Password blank.
Enter the dial patterns from the Custom Trunk above to the Dial Patterns here. It may be redundant, but so what.
Select the Custom Trunk above in the Trunk Sequence.
Submit Changes
(Optional) Adjust the routing priority with the Up/Down arrows in the top right (assuming you have more than 1 route).
You're all set on this server. Use the configs above for iaxhost2 and you are done.
Both servers should now be able to dial each other's extensions as provided in this example.
Notes:
Asterisk@Home 's AMP has a really nifty feature for Dial Patterns. Try out the Insert dropdown and select Lookup Local Prefixes. Now enter a local prefix in your area. You'll see all of the local dialing possibilities!
Dial() together with openining Jack ports for callee
Nescesarry if you want to "capture" a record in leg B with SoundPattyexten => _X.,n,Dial(SIP/$PROVIDER/${EXTEN},60,M(connect-jack)[macro-connect-jack]exten => s,1,NoOp(${CHANNEL}) ; This is leg A, skipexten => s,2,Set(JACK_HOOK(manipulate,i(${CHANNEL}:input),o(${CHANNEL}:output))=on)
Note: only for asterisk 1.6.x
Return values in channel variables
For PRI connections over a ZAP channel, as well as IAX2 channels, the hangup result code will be found the HANGUPCAUSE variable.
Note that causecode 0 is effectively a notice that the causecode has not been set. Causecode 16 is not an error, but simply a notice that the call went through and was terminated normally.
For all channels types, except LOCAL, the DIALSTATUS variable contains the result of the call, which may be used for dial plan logic
The variables DIALEDTIME and ANSWEREDTIME contains timing for billing (as in CDR records)
Version comments
Option A and S: added to CVS after release 0.7.2
Option D: in CVS since May 2004
Option f: added to CVS in June/July 2004
Variables DIALSTATUS, ANSWEREDTIME and DIALEDTIME: added to CVS head in june 2004
Support for specific hardware
Set variable ALERT_INFO to change ring cadence on Cisco 79xx phones. See also MySQL custom ringtones
Phones running the SCCP (skinny) firmware have some support for pushing XML pages. If you want to test it, set the variable VXML_URL to point to a Cisco XML file on a web server.
For distinctive ringing on Cisco Ata, see Asterisk phone cisco ATA18x
Dial with A(x&y&z) multiple playback files
Diff file its a copy/paste from app_playback.c in Asterisk-1.6.1.2
--- app_dial.c 2009-03-19 17:33:19.000000000 -0300
+++ /app_dial.c 2009-09-23 16:40:00.000000000 -0300
@@ -1706,4 +1706,18 @@ static int dial_exec_full(struct ast_cha
/* Now Stream the File */
- if (!res)
- res = ast_streamfile(peer, opt_args[OPT_ARG_ANNOUNCE], peer->language);
+ if (!res){
+ char *front;
+ char *args= opt_args[OPT_ARG_ANNOUNCE];
+ ast_log(LOG_INFO, "Dial Annoucement String: %s\n",opt_args[OPT_ARG_ANNOUNCE]);
+ while(front = strsep(&args, "&")){
+ res = ast_streamfile(peer, front, peer->language);
+ if (!res) {
+ res = ast_waitstream(peer, "");
+ ast_stopstream(peer);
+ } else {
+ ast_log(LOG_INFO, "ast_streamfile failed on %s\n", chan->name);
+ res = 0;
+ }
+ ast_log(LOG_WARNING, "Stream File %s\n",front);
+ }
+ }
if (!res) {
275
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
