题目链接:http://poj.org/problem?id=2112
Description
FJ has moved his K (1 <= K <= 30) milking machines out into the cow pastures among the C (1 <= C <= 200) cows. A set of paths of various lengths runs among the cows and the milking machines. The milking machine locations are named by ID numbers 1..K; the cow locations are named by ID numbers K+1..K+C.
Each milking point can "process" at most M (1 <= M <= 15) cows each day.
Write a program to find an assignment for each cow to some milking machine so that the distance the furthest-walking cow travels is minimized (and, of course, the milking machines are not overutilized). At least one legal assignment is possible for all input data sets. Cows can traverse several paths on the way to their milking machine.
Each milking point can "process" at most M (1 <= M <= 15) cows each day.
Write a program to find an assignment for each cow to some milking machine so that the distance the furthest-walking cow travels is minimized (and, of course, the milking machines are not overutilized). At least one legal assignment is possible for all input data sets. Cows can traverse several paths on the way to their milking machine.
Input
* Line 1: A single line with three space-separated integers: K, C, and M.
* Lines 2.. ...: Each of these K+C lines of K+C space-separated integers describes the distances between pairs of various entities. The input forms a symmetric matrix. Line 2 tells the distances from milking machine 1 to each of the other entities; line 3 tells the distances from machine 2 to each of the other entities, and so on. Distances of entities directly connected by a path are positive integers no larger than 200. Entities not directly connected by a path have a distance of 0. The distance from an entity to itself (i.e., all numbers on the diagonal) is also given as 0. To keep the input lines of reasonable length, when K+C > 15, a row is broken into successive lines of 15 numbers and a potentially shorter line to finish up a row. Each new row begins on its own line.
* Lines 2.. ...: Each of these K+C lines of K+C space-separated integers describes the distances between pairs of various entities. The input forms a symmetric matrix. Line 2 tells the distances from milking machine 1 to each of the other entities; line 3 tells the distances from machine 2 to each of the other entities, and so on. Distances of entities directly connected by a path are positive integers no larger than 200. Entities not directly connected by a path have a distance of 0. The distance from an entity to itself (i.e., all numbers on the diagonal) is also given as 0. To keep the input lines of reasonable length, when K+C > 15, a row is broken into successive lines of 15 numbers and a potentially shorter line to finish up a row. Each new row begins on its own line.
Output
A single line with a single integer that is the minimum possible total distance for the furthest walking cow.
Sample Input
2 3 2 0 3 2 1 1 3 0 3 2 0 2 3 0 1 0 1 2 1 0 2 1 0 0 2 0
Sample Output
2
Source
题目描写叙述:(转)
k个机器,每一个机器最多服务m头牛。
c头牛,每一个牛须要1台机器来服务。
告诉你牛与机器每一个之间的直接距离。
问:让全部的牛都被服务的情况下,使走的最远的牛的距离最短,求这个距离。
解题报告:
二分枚举距离,实际距离满足当前枚举距离限制的能够增加这条边。
枚举的距离中符合条件的最小值就是答案。
建图过程:
一个超级原点,和每一个机器的容量都是m。
一个超级汇点,每头牛和汇点的容量都是1.
机器i与牛j之间的距离假设小于等于当前枚举值mid,连接i,j。容量1.
这样最大流的意义就是可以服务的牛最多是多少,假设最大流等于牛的总数c。表示当前枚举值mid符合条件,同一时候说明mid值还可能可以更小。更新二分右边界r = mid - 1.
假设小于牛的总数。说明mid偏小,更新二分左边界,l = mid + 1.
机器与牛之间的最短距离能够用floyd预处理出来。
代码例如以下:
#include <cstdio>
#include <cstring>
#include <cstdlib>
#include <iostream>
#include <algorithm>
using namespace std;
const int MAXN = 310;//点数的最大值
const int MAXM = 40010;//边数的最大值
const int INF = 0x3f3f3f3f;
struct Edge
{
int to,next,cap,flow;
} edge[MAXM]; //注意是MAXM
int tol;
int head[MAXN];
int gap[MAXN],dep[MAXN],cur[MAXN];
int k, c, m;
int s, e;//源点,汇点
int map[MAXN][MAXN];
int mid;//二分中间值;
int num;//矩阵的规格;
//加边,单向图三个參数,双向图四个參数
void addedge(int u,int v,int w,int rw = 0)
{
edge[tol].to = v;
edge[tol].cap = w;
edge[tol].flow = 0;
edge[tol].next = head[u];
head[u] = tol++;
edge[tol].to = u;
edge[tol].cap = rw;
edge[tol].flow = 0;
edge[tol].next = head[v];
head[v] = tol++;
}
int Q[MAXN];
void BFS(int start,int end)
{
memset(dep,-1,sizeof(dep));
memset(gap,0,sizeof(gap));
gap[0] = 1;
int front = 0, rear = 0;
dep[end] = 0;
Q[rear++] = end;
while(front != rear)
{
int u = Q[front++];
for(int i = head[u]; i != -1; i = edge[i].next)
{
int v = edge[i].to;
if(dep[v] != -1)continue;
Q[rear++] = v;
dep[v] = dep[u] + 1;
gap[dep[v]]++;
}
}
}
int S[MAXN];
//输入參数:起点、终点、点的总数
//点的编号没有影响,仅仅要输入点的总数
int sap(int start,int end,int N)
{
BFS(start,end);
memcpy(cur,head,sizeof(head));
int top = 0;
int u = start;
int ans = 0;
while(dep[start] < N)
{
if(u == end)
{
int Min = INF;
int inser;
for(int i = 0; i < top; i++)
if(Min > edge[S[i]].cap - edge[S[i]].flow)
{
Min = edge[S[i]].cap - edge[S[i]].flow;
inser = i;
}
for(int i = 0; i < top; i++)
{
edge[S[i]].flow += Min;
edge[S[i]^1].flow -= Min;
}
ans += Min;
top = inser;
u = edge[S[top]^1].to;
continue;
}
bool flag = false;
int v;
for(int i = cur[u]; i != -1; i = edge[i].next)
{
v = edge[i].to;
if(edge[i].cap - edge[i].flow && dep[v]+1 == dep[u])
{
flag = true;
cur[u] = i;
break;
}
}
if(flag)
{
S[top++] = cur[u];
u = v;
continue;
}
int Min = N;
for(int i = head[u]; i != -1; i = edge[i].next)
if(edge[i].cap - edge[i].flow && dep[edge[i].to] < Min)
{
Min = dep[edge[i].to];
cur[u] = i;
}
gap[dep[u]]--;
if(!gap[dep[u]])return ans;
dep[u] = Min + 1;
gap[dep[u]]++;
if(u != start)u = edge[S[--top]^1].to;
}
return ans;
}
void Foyld()//两个点的最短距离
{
for(int k = 1; k <= num; k++)
{
for(int i = 1; i <= num; i++)
{
for(int j = 1; j <= num; j++)
{
if(map[i][j] > map[i][k]+map[k][j])
{
map[i][j] = map[i][k]+map[k][j];
}
}
}
}
}
void init()
{
tol = 0;
memset(head,-1,sizeof(head));
for(int i = 1; i <= k; i++)//k个挤奶器
{
for(int j = k+1; j <= num; j++)//c头奶牛
{
if(map[i][j] <= mid)
{
//假设奶牛到挤奶器的最短距离<=mid,建权值为1的边
addedge(j,i,1);
}
}
}
for(int i = 1; i <= k; i++)
{
addedge(i,e,m);//每一个挤奶器最多能够挤k头牛
}
for(int i = k+1; i <= num; i++)
{
addedge(s,i,1);//建一条源点到奶牛的边。权值为1
}
}
int main()
{
while(~scanf("%d%d%d",&k,&c,&m))
{
num = k+c;
s = 0;//源点
e = num+1;//汇点
int nv = num+2; //结点总数
for(int i = 1; i <= num; i++)
{
for(int j = 1; j <= num; j++)
{
scanf("%d",&map[i][j]);
if(i!=j && !map[i][j])
{
map[i][j] = INF;
}
}
}
Foyld();
int l = 0, r = INF;
while(l <= r)
{
mid = (r+l)/2;
init();
if(sap(s, e, nv) == c)//最大流等于c
{
r = mid-1;
}
else
{
l = mid+1;
}
}
printf("%d\n",l);
}
return 0;
}