1. let centos support Chinese input method
yum groupinstall chinese-support
vi /etc/sysconfig/i18n
LANG=”zh_CN.UTF-8
2.Mount windows partitions
mount -t ntfs /dev/hda1 /mnt/C -o iocharset=utf8
unknown filesystem type ‘ntfs’ ,
1.到
http://www.tuxera.com/community/ntfs-3g-download/地址,下载ntfs-3g
2.拷贝到Linux中,然后进入该目录,使用tar -zxvf ntfs-3g-xx.tgz 解压
3.cd ntfs-3g-xx
4.配置源文件 ./configure
configure: error: no acceptable C compiler found in $PATH
[root@localhost ~]# yum install gcc
5.编译并安装 make
make install
B.查看disk,确定要挂载的windows分区在linux下的表示
经过上面几步,已经安装好了ntfs-3g了,接着只要输入,
[root@localhost lord]# fdisk -l
bash: fdisk: command not found
[root@localhost /]# whereis fdisk
fdisk: /sbin/fdisk /usr/share/man/man8/fdisk.8.gz
[root@localhost /]# ln -s /sbin/fdisk /usr/bin
[root@localhost /]# find /usr/bin | grep "fdisk"
/usr/bin/fdisk
[root@localhost /]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 4905 39293952 7 HPFS/NTFS
/dev/sda3 4905 12554 61436928 7 HPFS/NTFS
/dev/sda4 12554 30402 143361024 f W95 Ext'd (LBA)
/dev/sda5 17055 20203 25288704 7 HPFS/NTFS
/dev/sda6 20203 30402 81918976 7 HPFS/NTFS
/dev/sda7 12555 12573 152586 83 Linux
/dev/sda8 12574 13338 6144831 83 Linux
/dev/sda9 13339 13465 1020096 83 Linux
/dev/sda10 13466 13592 1020096 83 Linux
/dev/sda11 13593 14102 4096543+ 82 Linux swap / Solaris
Partition table entries are not in disk order
Disk /dev/sdb: 4013 MB, 4013948928 bytes
255 heads, 63 sectors/track, 488 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 489 3919840+ c W95 FAT32 (LBA)
Partition 1 has different physical/logical endings:
phys=(487, 254, 63) logical=(488, 0, 24)
C.修改fstab 文件,实现挂载
[root@localhost /]# vi /etc/fstab
/dev/sda3 /mnt/win7 ntfs-3g defaults 0 0
…………
[root@localhost /]# mount -t ntfs-3g /dev/sda2 /mnt/downloadf -o iocharset=utf8
[root@localhost /]# mount -t ntfs-3g /dev/sda2 /mnt/downloadf -o iocharset=utf8
[root@localhost /]# mount -t ntfs-3g /dev/sda3 /mnt/win7c -o iocharset=utf8
[root@localhost /]# mount -t ntfs-3g /dev/sda5 /mnt/vmwared -o iocharset=utf8
[root@localhost /]# mount -t ntfs-3g /dev/sda6 /mnt/alldatae -o iocharset=utf8
转载于:https://blog.51cto.com/peacefulmind/829807