基于ConvertTo-Htm的css风格和指定单元格效果html报表的生成
PowerShell本身具有一个简单但是很实用的命令 ConvertTo-Htm，可以把整个对象转换成HTML格式。事实上，作为基本的功能他已经可以实现一些漂亮的界面了。但是还是太基础了，不能满足大多数用户的需要。
一方面，Html风格能否为美轮美奂css。还有，如何指定具体某一个单元格的效果呢，让用户体验更好呢。比如说，希望把Item5列所为ERR内容的都标示红色。
网上有这类函数，但不巧的是要收费，不提供源代码。我在ConvertTo-Htm基础上，经过改造实现了上述设想。现提供源代码供大家参考。
源代码如下：
Function Set-CellColor
{ <#
.SYNOPSIS
Function that allows you toset individual cell colors in an HTML table
.DESCRIPTION
To be used inconjunctionwith ConvertTo-HTML this simple function allows you
to set particular colors forcells in an HTML table. You provide thecriteria
the script uses to make thedetermination if a cell should be a particular
color (property -gt 5,property -like "*Apple*", etc).
You can add the function toyour scripts, dot source it to load into your current
PowerShell session or add itto your $Profile so it is always available.
To dot source:
.".\Set-CellColor.ps1"
.PARAMETER Property
Property, or column that youwill be keying on.
.PARAMETER Color
Name or 6-digit hex value ofthe color you want the cell to be
.PARAMETER InputObject
HTML you want the script toprocess. This can be entered directlyinto the
parameter or piped to thefunction.
.PARAMETER Filter
Specifies a query todetermine if a cell should have its color changed. $true
results will make the colorchange while $false result will return nothing.
Syntax
<Property Name><Operator> <Value>
<Property Name>::= thesame as $Property. This must matchexactly
<Operator>::="-eq" | "-le" | "-ge" | "-ne" |"-lt" | "-gt"| "-approx" | "-like" |"-notlike"
<JoinOperator> ::="-and" | "-or"
<NotOperator> ::="-not"
The script first attempts to convert thecell to a number, and if it fails it will
cast it as a string. So 40 will be a number and you can use -lt,-gt, etc. But 40%
would be cast as a string soyou could only use -eq, -ne, -like, etc.
.PARAMETER Row
Instructs the script tochange the entire row to the specified color instead of the individual cell.
.INPUTS
HTML with table
.OUTPUTS
HTML
.EXAMPLE
get-process | convertto-html| set-cellcolor -Propety cpu -Color red -Filter "cpu -gt 1000" |out-file c:\test\get-process.html
Assuming Set-CellColor hasbeen dot sourced, run Get-Process and convert to HTML.
Then change the CPU cell tored only if the CPU field is greater than 1000.
.EXAMPLE
get-process | convertto-html| set-cellcolor cpu red -filter "cpu -gt 1000 -and cpu -lt 2000" |out-file c:\test\get-process.html
Same as Example 1, but nowwe will only turn a cell red if CPU is greater than 100
but less than 2000.
.EXAMPLE
$HTML = $Data | sort server| ConvertTo-html -head $header | Set-CellColor cookedvalue red -Filter"cookedvalue -gt 1"
PS C:\> $HTML = $HTML |Set-CellColor Server green -Filter "server -eq 'dc2'"
PS C:\> $HTML |Set-CellColor Path Yellow -Filter "Path -like""*memory*""" | Out-File c:\Test\colortest.html
Takes a collection ofobjects in $Data, sorts on the property Server and converts to HTML. From there
we set the"CookedValue" property to red if it's greater then 1. We then send the HTML through Set-CellColor
again, this time setting theServer cell to green if it's "dc2". One more time through Set-CellColor
turns the Path cell toYellow if it contains the word "memory" in it.
.EXAMPLE
$HTML = $Data | sort server| ConvertTo-html -head $header | Set-CellColor cookedvalue red -Filter"cookedvalue -gt 1" -Row
Now, if the cookedvalueproperty is greater than 1 the function will highlight the entire row red.
.NOTES
Author: Martin Pugh
Twitter: @thesurlyadm1n
Spiceworks: Martin9700
Blog: www.thesurlyadmin.com
Changelog:
1.5 Added ability to set row colorwith -Row switch instead of the individual cell
1.03 Added error message in case the$Property field cannot be found in the table header
1.02 Added some additional text tohelp. Added some error trapping around$Filter
creation.
1.01 Added verbose output
1.0 Initial Release
.LINK
http://community.spiceworks.com/scripts/show/2450-change-cell-color-in-html-table-with-powershell-set-cellcolor
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory,Position=0)]
[string]$Property,
[Parameter(Mandatory,Position=1)]
[string]$Color,
[Parameter(Mandatory,ValueFromPipeline)]
[Object[]]$InputObject,
[Parameter(Mandatory)]
[string]$Filter,
[switch]$Row
)
Begin {
Write-Verbose"$(Get-Date): Function Set-CellColor begins"
If ($Filter)
{ If($Filter.ToUpper().IndexOf($Property.ToUpper()) -ge 0)
{ $Filter =$Filter.ToUpper().Replace($Property.ToUpper(),"`$Value")
Try {
[scriptblock]$Filter = [scriptblock]::Create($Filter)
}
Catch {
Write-Warning"$(Get-Date): ""$Filter"" caused an error, stoppingscript!"
Write-Warning$Error[0]
Exit
}
}
Else
{ Write-Warning "Could not locate$Property in the Filter, which is required. Filter: $Filter"
Exit
}
}
}
Process {
ForEach ($Line in$InputObject)
{ If($Line.IndexOf("<tr><th") -ge 0)
{ Write-Verbose "$(Get-Date): Processingheaders..."
$Search = $Line |Select-String -Pattern '<th ?[a-z\-:;"=]*>(.*?)<\/th>'-AllMatches
$Index = 0
ForEach ($Match in$Search.Matches)
{ If ($Match.Groups[1].Value -eq $Property)
{ Break
}
$Index ++
}
If ($Index -eq$Search.Matches.Count)
{ Write-Warning "$(Get-Date): Unable tolocate property: $Property in table header"
Exit
}
Write-Verbose"$(Get-Date): $Property column found at index: $Index"
}
If ($Line -match"<tr(style=""background-color:.+?"")?><td")
{ $Search = $Line | Select-String -Pattern'<td ?[a-z\-:;"=]*>(.*?)<\/td>' -AllMatches
$Value =$Search.Matches[$Index].Groups[1].Value -as [double]
If (-not $Value)
{ $Value =$Search.Matches[$Index].Groups[1].Value
}
If (Invoke-Command$Filter)
{ If ($Row)
{ Write-Verbose "$(Get-Date): Criteriamet! Changing row to $Color..."
If ($Line-match "<trstyle=""background-color:(.+?)"">")
{ $Line = $Line -replace "<trstyle=""background-color:$($Matches[1])","<trstyle=""background-color:$Color"
}
Else
{ $Line =$Line.Replace("<tr>","<tr style=""background-color:$Color"">")
}
}
Else
{ Write-Verbose "$(Get-Date): Criteriamet! Changing cell to $Color..."
$Line =$Line.Replace($Search.Matches[$Index].Value,"<tdstyle=""background-color:$Color"">$Value</td>")
}
}
}
Write-Output $Line
}
}
End {
Write-Verbose"$(Get-Date): Function Set-CellColor completed"
}
}
function filestring-search($inputFile,$matchstring,$matchcount){
$tmpcontent = Get-Content$inputFile
for($i=0;$i -le$tmpcontent.length;i++)
{
if($tmpcontent[$i] -like'*Err*'){
$matchcount++
wite-host matchcount:$matchcount -background red
}
}
return
}
Function ConvertTo-AdvHTML
{ <#
.SYNOPSIS
Advanced replacement ofConvertTo-HTML cmdlet
.DESCRIPTION
This function allows forvastly greater control over cells and rows
in a HTML table. It takes ConvertTo-HTML to a whole newlevel! You
can now specify what color acell or row is (either dirctly or through
the use of CSS). You can add links, pictures and pictures ASlinks.
You can also specify a cellto be a bar graph where you control the
colors of the graph and textthat can be included in the graph.
All color functions arethrough the use of imbedded text tags inside the
properties of the object youpass to this function. It is importantto note
that this function does notdo any processing for you, you must make sure all
control tags are alreadypresent in the object before passing it to the
function.
Here are the different tagsavailable:
Syntax Comment
===================================================================================
[cell:<color>]<optional text> Designate the color of the cell. Must be
at the beginning of the string.
Example:
[cell:red]System Down
[row:<color>] Designate the color of therow. This control
can be anywhere, in any property of the object.
Example:
[row:orchid]
[cellclass:<class>]<optional text>
Designate the color, and other properties, of the
cell based on a class in your CSS. You must
have the class in your CSS (use the -CSS parameter).
Must be at the beginning of the string.
Example:
[cellclass:highlight]10mb
[rowclass:<class>] Designate the color, and other properties, of the
row based on a class in your CSS. You must
have the class in your CSS (use the -CSS parameter).
This control can be anywhere, in any property of the
object.
Example:
[rowclass:greyishbold]
[p_w_picpath:<height;width;url>]<alternate text>
Include an p_w_picpath in your cell. Put size of picture
in pixels and url seperated by semi-colons. Format
must beheight;width;url. You can also includeother
text in the cell, but the [p_w_picpath] tag must be at the
end of the tag (so the alternate text is last).
Example:
[p_w_picpath:100;200;http://www.sampleurl.com/samplep_w_picpath.jpg]Alt Text ForImage
[link:<url>]<linktext> Include a link in yourcell. Other text is allowed in
the string, but the [link] tag must be at the end of the
string.
Example:
blah blah blah [link:www.thesurlyadmin.com]Cool PowerShell Link
[linkpic:<height;width;url to pic>]<url for link>
This tag uses a picture which you can click on and go to the
specified link. You must specifythe size of the picture and
url where it is located, this information is seperated by semi-
colons. Other text is allowed inthe string, but the [link] tag
must be at the end of the string.
Example:
[linkpic:100;200;http://www.sampleurl.com/samplep_w_picpath.jpg]www.thesurlyadmin.com
[bar:<percent;barcolor;remainder color>]<optional text>
Bar graph makes a simple colored bar graph within the cell. The
length of the bar is controlled using <percent>. You can
designate the color of the bar, and the color of the remainder
section. Due to the mysteries ofHTML, you must designate a
width for the column with the [bar] tag using the HeadWidth parameter.
So if you had a percentage of 95, say 95% used disk you
would want to highlight the remainder for your report:
Example:
[bar:95;darkgreen;red]5% free
What if you were at 30% of a sales goal with only 2 weeks left in
the quarter, you would want to highlight that you have a problem.
Example:
[bar:30;darkred;red]30% of goal
.PARAMETER InputObject
The object you wantconverted to an HTML table
.PARAMETER HeadWidth
You can specify the width ofa cell. Cell widths are in pixels
and are passed to theparameter in array format. Each element
in the array corresponds tothe column in your table, any element
that is set to 0 willdesignate the column with be dynamic. Ifyou had
four elements in yourInputObject and wanted to make the 4th a fixed
width--this is required forusing the [bar] tag--of 600 pixels:
-HeadWidth 0,0,0,600
.PARAMETER CSS
Designate custom CSS foryour HTML
.PARAMETER Title
Specifies a title for theHTML file, that is, the text that appears between the <TITLE> tags.
.PARAMETER PreContent
Specifies text to add beforethe opening <TABLE> tag. By default, there is no text in that position.
.PARAMETER PostContent
Specifies text to add afterthe closing </TABLE> tag. By default, there is no text in that position.
.PARAMETER Body
Specifies the text to addafter the opening <BODY> tag. By default, there is no text in thatposition.
.PARAMETER Fragment
Generates only an HTMLtable. The HTML, HEAD, TITLE, and BODY tags are omitted.
.INPUTS
System.Management.Automation.PSObject
You can pipe any .NET objectto ConvertTo-AdvHtml.
.OUTPUTS
System.String
ConvertTo-AdvHtml returnsseries of strings that comprise valid HTML.
.EXAMPLE
$Data = @"
Server,Description,Status,Disk
[row:orchid]Server1,Hello1,[cellclass:up]Up,"[bar:45;Purple;Orchid]55%Free"
Server2,Hello2,[cell:green]Up,"[bar:65;DarkGreen;Green]65% Used"
Server3,Goodbye3,[cell:red]Down,"[bar:95;DarkGreen;DarkRed]5%Free"
server4,This is quite a cooltest,[cell:green]Up,"[p_w_picpath:150;650;http://pughspace.files.wordpress.com/2014/01/test-connection.png]TestImages"
server5,SurlyAdmin,[cell:red]Down,"[link:http://thesurlyadmin.com]TheSurly Admin"
server6,MoreSurlyAdmin,[cell:purple]Updating,"[linkpic:150;650;http://pughspace.files.wordpress.com/2014/01/test-connection.png]http://thesurlyadmin.com"
"@
$Data = $Data |ConvertFrom-Csv
$HTML = $Data |ConvertTo-AdvHTML -HeadWidth 0,0,0,600 -PreContent"<p><h1>This might be the best reportEVER</h1></p><br>" -PostContent "<br>Done!$(Get-Date)" -Title "Cool Test!"
This is some sample codewhere I try to put every possibile tag and use into a single set
of data. $Data is the PSObject 4 columns. Default CSS is used, so the [cellclass:up]tag
will not work but I left itthere so you can see how to use it.
.NOTES
Author: Martin Pugh
Twitter: @thesurlyadm1n
Spiceworks: Martin9700
Blog: www.thesurlyadmin.com
Changelog:
1.0 Initial Release
.LINK
http://thesurlyadmin.com/convertto-advhtml-help/
.LINK
http://community.spiceworks.com/scripts/show/2448-create-advanced-html-tables-in-powershell-convertto-advhtml
#>
#requires -Version 2.0
[CmdletBinding()]
Param (
[Parameter(Mandatory=$true,
ValueFromPipeline=$true)]
[Object[]]$InputObject,
[string[]]$HeadWidth,
[string]$CSS = @"
<style>
TABLE {border-width: 1px;border-style: solid;border-color:black;border-collapse: collapse;}
TH {border-width: 1px;padding: 3px;border-style: solid;border-color:black;background-color: #6495ED;font-size:120%;}
TD {border-width: 1px;padding: 3px;border-style: solid;border-color:black;}
</style>
"@,
[string]$Title,
[string]$PreContent,
[string]$PostContent,
[string]$Body,
[switch]$Fragment
)
Begin {
If ($Title)
{ $CSS += "`n<title>$Title</title>`n"
}
$Params = @{
Head = $CSS
}
If ($PreContent)
{ $Params.Add("PreContent",$PreContent)
}
If ($PostContent)
{ $Params.Add("PostContent",$PostContent)
}
If ($Body)
{ $Params.Add("Body",$Body)
}
If ($Fragment)
{ $Params.Add("Fragment",$true)
}
$Data = @()
}
Process {
ForEach ($Line in $InputObject)
{ $Data += $Line
}
}
End {
$Html = $Data |ConvertTo-Html @Params |Set-CellColor item5 red -Filter "item5 -eq'ERR'"
$NewHTML = @()
ForEach ($Line in $Html)
{ If ($Line -like "*<th>*")
{ If ($Headwidth)
{ $Index = 0
$Reg = $Line |Select-String -AllMatches -Pattern "<th>(.*?)<\/th>"
ForEach ($th in$Reg.Matches)
{ If ($Index -le ($HeadWidth.Count - 1))
{ If ($HeadWidth[$Index] -and$HeadWidth[$Index] -gt 0)
{ $Line = $Line.Replace($th.Value,"<thstyle=""width:$($HeadWidth[$Index])px"">$($th.Groups[1])</th>")
}
}
$Index ++
}
}
}
Do {
Switch -regex($Line)
{ "<td>\[cell:(.*?)\].*?<\/td>"
{ $Line =$Line.Replace("<td>[cell:$($Matches[1])]","<tdstyle=""background-color:$($Matches[1])"">")
Break
}
"\[cellclass:(.*?)\]"
{ $Line =$Line.Replace("<td>[cellclass:$($Matches[1])]","<tdclass=""$($Matches[1])"">")
Break
}
"\[row:(.*?)\]"
{ $Line =$Line.Replace("<tr>","<tr style=""background-color:$($Matches[1])"">")
$Line =$Line.Replace("[row:$($Matches[1])]","")
Break
}
"\[rowclass:(.*?)\]"
{ $Line =$Line.Replace("<tr>","<trclass=""$($Matches[1])"">")
$Line =$Line.Replace("[rowclass:$($Matches[1])]","")
Break
}
"<td>\[bar:(.*?)\](.*?)<\/td>"
{ $Bar = $Matches[1].Split(";")
$Width = 100- [int]$Bar[0]
If (-not$Matches[2])
{ $Text = " "
}
Else
{ $Text = $Matches[2]
}
$Line =$Line.Replace($Matches[0],"<td><divstyle=""background-color:$($Bar[1]);float:left;width:$($Bar[0])%"">$Text</div><divstyle=""background-color:$($Bar[2]);float:left;width:$width%""> </div></td>")
Break
}
"\[p_w_picpath:(.*?)\](.*?)<\/td>"
{ $Image = $Matches[1].Split(";")
$Line =$Line.Replace($Matches[0],"<imgsrc=""$($Image[2])""alt=""$($Matches[2])""height=""$($Image[0])""width=""$($Image[1])""></td>")
}
"\[link:(.*?)\](.*?)<\/td>"
{ $Line =$Line.Replace($Matches[0],"<a href=""$($Matches[1])"">$($Matches[2])</a></td>")
}
"\[linkpic:(.*?)\](.*?)<\/td>"
{ $Images = $Matches[1].Split(";")
$Line =$Line.Replace($Matches[0],"<ahref=""$($Matches[2])""><imgsrc=""$($Image[2])""height=""$($Image[0])""width=""$($Image[1])""></a></td>")
}
Default
{ Break
}
}
} Until ($Line -notmatch"\[.*?\]")
$NewHTML += $Line
}
Return $NewHTML
}
}
$today = Get-Date -UFormat "%Y%m%d"
$LogFilePath = "C:\DayCheck\ftpLog_$today.txt"
$today = Get-Date -UFormat "%Y%m%d"
$TargetFileTxt= "C:\DayCheck\CheckResultALL.txt"
$TargetFileHtml= "C:\DayCheck\CheckResultALL.html"
if( Test-Path $TargetFileTxt ){
write-host "$TargetFileTxt exist remove"
remove-item$TargetFileTxt -Force
}else {
write-host"create $TargetFileTxt "
New-Item -Path$TargetFileTxt -Type file
}
remove-item C:\DayCheck\ResultOut.txt -Force
remove-item C:\DayCheck\CheckResult* -Force
New-Item -Path C:\DayCheck\*_result.txt -Typefile
New-Item -Path C:\DayCheck\CheckResultSummaryALL.txt -Type file
New-Item -Path C:\DayCheck\ResultOut.txt -Typefile
New-Item -Path C:\DayCheck\C:\DayCheck\CheckResultALL.txt -Type file
$UserName = "daycheck"
$Password = "daycheck"
"item1,item2,item3,item4,item5,item6"| Out-File -Encoding utf8 C:\DayCheck\CheckResultSummaryALL.csv
Import-Csv 'C:\DayCheck\MachineList.csv' |ForEach-Object{
$OS = $_.OS
$APP = $_.APP
$IP = $_.IP
$NAME = $_.NAME
$RemoteFilename = "ftp://xx.xx.20.240/"+ $OS + "_"+ $NAME + "_all_"+ "20160722" +"07_" + "result.txt"
$RemoteFilename
$filename = "C:\DayCheck\" + $OS +"_"+ $NAME + "_all_"+"20160722" + "07_"+ "result.txt"
if ( Test-Path -Path $filename ) {
write-host "search file $filenamebegining "
$tmpcontent=Get-Content$filename | Where-Object { $_ -like '*Err*' }
$matchcount=0
foreach($element in$tmpcontent){
$matchcount++
#write-host"element $element "
}
write-host "search fileErr : $matchcount " -background red
if($matchcount -eq 1 )
{
"$APP,$NAME$IP,$OS,download,O K,$herffilename" | Out-File -Encoding utf8 -Append C:\DayCheck\CheckResultSummaryALL.csv
}else{
"$APP,$NAME$IP,$OS,download,ERR,$herffilename" | Out-File -Encoding utf8 -Append C:\DayCheck\CheckResultSummaryALL.csv
}
} else{
"$APP,$NAME($IP),$OS,N/A,N/A,N/A" | Out-File -Encoding utf8 -Append C:\DayCheck\CheckResultSummaryALL.csv
}
}
C:\DayCheck\*_result.txt>>C:\DayCheck\CheckResultTotalALL.txt
import-csv C:\DayCheck\CheckResultSummaryALL.csv | ConvertTo-AdvHTML -HeadWidth 0,0,0,0,0,0-PreContent "<p><h1>This might be the best reportEVER</h1></p><br>" -PostContent "<br>Done!$(Get-Date)" -Title "Cool Test!" | Set-Content "C:\DayCheck\CheckResultSummaryALL.html"
invoke-item C:\DayCheck\CheckResultSummaryALL.html
转载于:https://blog.51cto.com/19701522/1965610
扫一扫
1192
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
