P6Spy和sping配合显示真正的SQL

2019独角兽企业重金招聘Python工程师标准>>>

1,p6spy.jar放入lib目录，spy.properties文件放入classes目录
2,spy.properties文件做下面的配置之后，可以把sql语句打印到控制台和文件：

# ################################################################
# MODULES #
# #
# Modules provide the P6Spy functionality. If a module, such #
# as module_log is commented out, that functionality will not #
# be available. If it is not commented out (if it is active), #
# the functionality will be active. #
# #
# Values set in Modules cannot be reloaded using the #
# reloadproperties variable. Once they are loaded, they remain #
# in memory until the application is restarted. #
# #
#################################################################

module . log = com . p6spy . engine . logging . P6LogFactory
# module.outage=com.p6spy.engine.outage.P6OutageFactory

#################################################################
# REALDRIVER(s) #
# #
# In your application server configuration file you replace the #
# "real driver" name with com.p6spy.engine.P6SpyDriver. This is #
# where you put the name of your real driver P6Spy can find and #
# register your real driver to do the database work. #
# #
# If your application uses several drivers specify them in #
# realdriver2, realdriver3. See the documentation for more #
# details. #
# #
# Values set in REALDRIVER(s) cannot be reloaded using the #
# reloadproperties variable. Once they are loaded, they remain #
# in memory until the application is restarted. #
# #
#################################################################

# the hsqldb open source driver
#realdriver=org.hsqldb.jdbcDriver

# oracle driver
realdriver=oracle.jdbc.driver. OracleDriver

# mysql Connector/J driver
#realdriver=com.mysql.jdbc.Driver

# informix driver
# realdriver=com.informix.jdbc.IfxDriver

# ibm db2 driver
# realdriver=COM.ibm.db2.jdbc.net.DB2Driver

# the mysql open source driver
# realdriver=org.gjt.mm.mysql.Driver

#specifies another driver to use
realdriver2 =
# specifies a third driver to use
realdriver3 =

# the DriverManager class sequentially tries every driver that is
#registered to find the right driver. In some instances, it's possible to
#load up the realdriver before the p6spy driver, in which case your connections
#will not get wrapped as the realdriver will "steal" the connection before
#p6spy sees it. Set the following property to "true" to cause p6spy to
#explicitily deregister the realdrivers
deregisterdrivers= true

# ###############################################################
# P6LOG SPECIFIC PROPERTIES #
################################################################
# no properties currently available

################################################################
# EXECUTION THRESHOLD PROPERTIES #
################################################################
# This feature applies to the standard logging of P6Spy. #
# While the standard logging logs out every statement #
# regardless of its execution time, this feature puts a time #
# condition on that logging. Only statements that have taken #
# longer than the time specified (in milliseconds) will be #
# logged. This way it is possible to see only statements that #
# have exceeded some high water mark. #
# This time is reloadable. #
#
# executionthreshold=integer time (milliseconds)
#
executionthreshold =

# ###############################################################
# P6OUTAGE SPECIFIC PROPERTIES #
################################################################
# Outage Detection
#
# This feature detects long-running statements that may be indicative of
# a database outage problem. If this feature is turned on, it will log any
# statement that surpasses the configurable time boundary during its execution.
# When this feature is enabled, no other statements are logged except the long
# running statements. The interval property is the boundary time set in seconds.
# For example, if this is set to 2, then any statement requiring at least 2
# seconds will be logged. Note that the same statement will continue to be logged
# for as long as it executes. So if the interval is set to 2, and the query takes
# 11 seconds, it will be logged 5 times (at the 2, 4, 6, 8, 10 second intervals).
#
# outagedetection=true|false
# outagedetectioninterval=integer time (seconds)
#
outagedetection = false
outagedetectioninterval =

# ###############################################################
# COMMON PROPERTIES #
################################################################

# comma separated list of tables to include
include =
# comma separated list of tables to exclude
exclude =

# sql expression to evaluate if using regex
sqlexpression =

# filter what is logged
filter = false

# turn on tracing
trace = true
autoflush = true

# sets the date format using Java's SimpleDateFormat routine
dateformat =

# list of categories to explicitly include
includecategories =

# list of categories to exclude: error, info, batch, debug, statement,
#commit, rollback and result are valid values
#excludecategories=
excludecategories = info , debug , result , batch

# allows you to use a regex engine or your own matching engine to determine
#which statements to log
#
#stringmatcher=com.p6spy.engine.common.GnuRegexMatcher
#stringmatcher=com.p6spy.engine.common.JakartaRegexMatcher
stringmatcher =

# prints a stack trace for every statement logged
stacktrace = false
# if stacktrace=true, specifies the stack trace to print
stacktraceclass =

# determines if property file should be reloaded
reloadproperties = false
# determines how often should be reloaded in seconds
reloadpropertiesinterval = 60

# if=true then url must be prefixed with p6spy:
useprefix = false

# specifies the appender to use for logging
appender=com.p6spy.engine.logging.appender. Log4jLogger
# appender=com.p6spy.engine.logging.appender.StdoutLogger
#appender=com.p6spy.engine.logging.appender.FileLogger

# name of logfile to use, note Windows users should make sure to use forward slashes in their pathname (e:/test/spy.log) (used for file logger only)
#logfile = c:/spy.log

# append to the p6spy log file. if this is set to false the
# log file is truncated every time. (file logger only)
append=true

#The following are for log4j logging only
log4j.appender.STDOUT=org.apache.log4j.ConsoleAppender
log4j.appender.STDOUT.layout=org.apache.log4j.PatternLayout
log4j.appender.STDOUT.layout.ConversionPattern=p6spy - %m%n

log4j.appender.F=org.apache.log4j.DailyRollingFileAppender
log4j.appender.A2.DatePattern='.'yyyy-MM-dd
log4j.appender.F.File=c:/spy.log
log4j.appender.F.layout=org.apache.log4j.PatternLayout
# log4j.appender.F.layout.ConversionPattern=%p %t %c - %m%n

#log4j.appender.CHAINSAW_CLIENT=org.apache.log4j.net.SocketAppender
#log4j.appender.CHAINSAW_CLIENT.RemoteHost=localhost
#log4j.appender.CHAINSAW_CLIENT.Port=4445
#log4j.appender.CHAINSAW_CLIENT.LocationInfo=true

log4j .logger.p6spy=INFO,STDOUT, F

# ################################################################
# DataSource replacement #
# #
# Replace the real DataSource class in your application server #
# configuration with the name com.p6spy.engine.spy.P6DataSource,#
# then add the JNDI name and class name of the real #
# DataSource here #
# #
# Values set in this item cannot be reloaded using the #
# reloadproperties variable. Once it is loaded, it remains #
# in memory until the application is restarted. #
# #
#################################################################
#realdatasource=/RealMySqlDS
#realdatasourceclass=com.mysql.jdbc.jdbc2.optional.MysqlDataSource

#################################################################
# DataSource properties #
# #
# If you are using the DataSource support to intercept calls #
# to a DataSource that requires properties for proper setup, #
# define those properties here. Use name value pairs, separate #
# the name and value with a semicolon, and separate the #
# pairs with commas. #
# #
# The example shown here is for mysql #
# #
#################################################################
#realdatasourceproperties=port;3306,serverName;myhost,databaseName;jbossdb,foo;bar


#################################################################
# JNDI DataSource lookup #
# #
# If you are using the DataSource support outside of an app #
# server, you will probably need to define the JNDI Context #
# environment. #
# #
# If the P6Spy code will be executing inside an app server then #
# do not use these properties, and the DataSource lookup will #
# use the naming context defined by the app server. #
# #
# The two standard elements of the naming environment are #
# jndicontextfactory and jndicontextproviderurl. If you need #
# additional elements, use the jndicontextcustom property. #
# You can define multiple properties in jndicontextcustom, #
# in name value pairs. Separate the name and value with a #
# semicolon, and separate the pairs with commas. #
# #
# The example shown here is for a standalone program running on #
# a machine that is also running JBoss, so the JDNI context #
# is configured for JBoss (3.0.4). #
# #
#################################################################
#jndicontextfactory=org.jnp.interfaces.NamingContextFactory
#jndicontextproviderurl=localhost:1099
#jndicontextcustom=java.naming.factory.url.pkgs;org.jboss.nameing:org.jnp.interfaces

#jndicontextfactory=com.ibm.websphere.naming.WsnInitialContextFactory
#jndicontextproviderurl=iiop://localhost:900

3，修改Spring的context文件（本身引入了配置文件）：

<!--   P6Spy Just for development -->
    < bean id ="dataSource" class ="com.p6spy.engine.spy.P6DataSource" >
        < constructor-arg >
            < bean
                class ="org.springframework.jdbc.datasource.DriverManagerDataSource" >
                < property name ="driverClassName"
                    value ="${jdbc.driverClassName}" />
                < property name ="url" value ="${jdbc.url}" />
                < property name ="username" value ="${jdbc.username}" />
                < property name ="password" value ="${jdbc.password}" />
            </ bean >
        </ constructor-arg >
    </ bean >

注：貌似hibernate3.0以前是这样。

 

转载于:https://my.oschina.net/tiancai/blog/131510