CC2530 控制输出功率的寄存器是 TXPOWER:
推荐功率设置:
协议栈默认的设置是 0xd5,为了扩展信号传输的距离,我把TXPOWER寄存器值改为0xf5, 此时输出功率为4.5dBm.在mac_radio.c文件,做了例如以下改动: void macRadioSetTxPower(uint8 txPower) { halIntState_t s; /* if the selected dBm is out of range, use the closest available */ if (txPower > MAC_RADIO_TX_POWER_MAX_DBM) { txPower = MAC_RADIO_TX_POWER_MAX_DBM; } /* * Set the global variable reqTxPower. This variable is referenced * by the function macRadioUpdateTxPower() to write the radio register. * * A lookup table is used to translate the power level to the register * value. */ HAL_ENTER_CRITICAL_SECTION(s); reqTxPower = macRadioDefsTxPowerTable[txPower]; HAL_EXIT_CRITICAL_SECTION(s); /* update the radio power setting */ //************** 自己改动 ******* reqTxPower = 0xF5; //******************************* macRadioUpdateTxPower(); } |