H3C设备网络组建和设置

2019独角兽企业重金招聘Python工程师标准>>>

路由器: ER8300

交换机: S3600v2

 

说明:这次网络配置主要是模拟,这套网络是挂在办公室网络下的.由于办公室给我的网络是:192.168.3.0/24, 网关是:192.168.3.254. 所以我们规划如下:

ER8300 wan口:192.168.3.11

设备ip(就是用于交换机,路由器互联ip): 192.168.2.x

应用ip全部在s3600v2上配置

:192.168.111.x, 192.168.112.x, 192.168.113.x, 192.168.114.x, 192.168.115.x .

其vlan号分别为: vlan111,vlan112,vlan113,vlan114,vlan115.

第一步:

首先连接交换机,设置

dhcp server ip-pool ip111
 network 192.168.111.0 mask 255.255.255.0
 gateway-list 192.168.111.254
dns-list 61.128.128.68
 expired day 4
dhcp server ip-pool ip112
 network 192.168.113.0 mask 255.255.255.0
 gateway-list 192.168.112.254
dns-list 61.128.128.68

 expired day 4
#其它网段类似配置.

#在vlan接口中配置dhcp.
interface Vlan-interface111
 ip address 192.168.111.254 255.255.255.0
 dhcp server client-detect enable
interface Vlan-interface112
 ip address 192.168.112.254 255.255.255.0
 dhcp server client-detect enable
#其它网段类似配置.

#在vlan接口中配置物理接口.
interface Ethernet1/0/11
 port link-mode bridge
 port access vlan 111
interface Ethernet1/0/12
 port link-mode bridge
 port access vlan 112
interface Ethernet1/0/13
 port link-mode bridge
 port access vlan 113
#其它网段类似配置

设置路由接口和ip地址:
Interface Ethernet 1/0/1
port link-mode route
 ip address 192.168.2.9 255.255.255.0

创建默认静态路由:
ip route-static 0.0.0.0 0.0.0.0 192.168.2.1
开启dhcp
dhcp enable

 

第二步:

设置路由器

设置wan口为静态ip地址:192.168.3.11

设置lan口为静态ip地址:192.168.2.1

开启telnet 然后可以telnet上来ping 192.168.2.1和ping 192.168.3.254

设置接口路由

0.0.0.0  0.0.0.0  192.168.3.254  wan口

192.168.111.0  255.255.255.0  192.168.2.9  lan口

192.168.112.0  255.255.255.0  192.168.2.9  lan口

192.168.113.0  255.255.255.0  192.168.2.9  lan口

192.168.114.0  255.255.255.0  192.168.2.9  lan口

192.168.115.0  255.255.255.0  192.168.2.9  lan口

如图:

到这里就已经完成了.只需要测试和save.

 

第三步测试:

把电脑接到以太网12电口

如图:

 

 

 

 

[H3C]disp curr
#
 version 5.20, Release 2108P01
#
 sysname H3C
#
 irf mac-address persistent timer
 irf auto-update enable
 undo irf link-delay
#
 domain default enable system
#
 management-vlan 1001
#
 password-recovery enable
#
vlan 1
#
vlan 111 to 115
#
vlan 1001
#
domain system
 access-limit disable
 state active   
 idle-cut disable
 self-service-url disable
#
dhcp server ip-pool ip111
 network 192.168.111.0 mask 255.255.255.0
 gateway-list 192.168.111.254
 dns-list 61.128.128.68
 expired day 2
#
dhcp server ip-pool ip112
 network 192.168.112.0 mask 255.255.255.0
 gateway-list 192.168.112.254
 dns-list 61.128.128.68
 expired day 2
#
dhcp server ip-pool ip113
 network 192.168.113.0 mask 255.255.255.0
 gateway-list 8.8.8.8
 expired day 4
#
dhcp server ip-pool ip114
 network 192.168.114.0 mask 255.255.255.0
 gateway-list 192.168.114.254
 dns-list 8.8.8.8
#
dhcp server ip-pool ip115
 network 192.168.115.0 mask 255.255.255.0
 gateway-list 192.168.115.254
 dns-list 8.8.8.8
 expired day 5
#
user-group system
 group-attribute allow-guest
#
local-user admin
 password cipher $c$3$+24A5LfChlwynQ6I4O3uUiEWX+dcKmvs
 service-type terminal
#
interface Ethernet1/0/1
 port link-mode route
 ip address 192.168.2.9 255.255.255.0
#
interface NULL0
#
interface Vlan-interface111
 ip address 192.168.111.254 255.255.255.0
 dhcp server client-detect enable
#
interface Vlan-interface112
 ip address 192.168.112.254 255.255.255.0
 dhcp server client-detect enable
#
interface Vlan-interface113
 ip address 192.168.113.254 255.255.255.0
 dhcp server client-detect enable
#
interface Vlan-interface114
 ip address 192.168.114.254 255.255.255.0
 dhcp server client-detect enable
#
interface Vlan-interface115
 ip address 192.168.115.254 255.255.255.0
 dhcp server client-detect enable
#
interface Vlan-interface1001
#
interface Ethernet1/0/2
 port link-mode bridge
#               
interface Ethernet1/0/3
 port link-mode bridge
#
interface Ethernet1/0/4
 port link-mode bridge
#
interface Ethernet1/0/5
 port link-mode bridge
#
interface Ethernet1/0/6
 port link-mode bridge
#
interface Ethernet1/0/7
 port link-mode bridge
#
interface Ethernet1/0/8
 port link-mode bridge
#
interface Ethernet1/0/9
 port link-mode bridge
#
interface Ethernet1/0/10
 port link-mode bridge
#
interface Ethernet1/0/11
 port link-mode bridge
 port access vlan 111
#
interface Ethernet1/0/12
 port link-mode bridge
 port access vlan 112
#
interface Ethernet1/0/13
 port link-mode bridge
 port access vlan 113
#
interface Ethernet1/0/14
 port link-mode bridge
 port access vlan 114
#
interface Ethernet1/0/15
 port link-mode bridge
 port access vlan 115
#
interface Ethernet1/0/16
 port link-mode bridge
#
interface Ethernet1/0/17
 port link-mode bridge
#
interface Ethernet1/0/18
 port link-mode bridge
#
interface Ethernet1/0/19
 port link-mode bridge
#
interface Ethernet1/0/20
 port link-mode bridge
#
interface Ethernet1/0/21
 port link-mode bridge
 port access vlan 111
#
interface Ethernet1/0/22
 port link-mode bridge
 port access vlan 112
#
interface Ethernet1/0/23
 port link-mode bridge
 port access vlan 113
#
interface Ethernet1/0/24
 port link-mode bridge
#
interface GigabitEthernet1/0/25
 port link-mode bridge
#
interface GigabitEthernet1/0/26
 port link-mode bridge
#
interface GigabitEthernet1/0/27
 port link-mode bridge
#
interface GigabitEthernet1/0/28
 port link-mode bridge
#
 ip route-static 0.0.0.0 0.0.0.0 192.168.2.1
#
 dhcp enable
#
 load xml-configuration
#               
 load tr069-configuration
#
user-interface aux 0
 authentication-mode scheme
user-interface vty 0 15
#
return
[H3C]

 

 

转载于:https://my.oschina.net/lenglingx/blog/716271