1.将cluster停止。
3. 将新的datanode的host加到集群namenode及其他datanode中去；
4. 将新的datanode的host加到master的conf/slaves中；
5. 再次启动cluster,在cluster中看到新的datanode节点；
5. 运行bin/start-balancer.sh，平衡数据。

1.balance是为了平衡数据，如果不执行该命令，cluster将会把新的数据都存放在新的datanode上，这样，造成分布不平衡，影响mr的工作效率。
threshold 是平衡阈值，默认是10%，值越低各节点越平衡，但消耗时间也更长）。
3. balancer也可以在有mr job的cluster上运行，默认dfs.balance.bandwidthPerSec很低，为1M/s。在没有mr job时，可以提高该设置加快负载均衡时间。

5.dfs.replication设置的副本系数只在文件系统写入时有效，并不影响在新添加节点时，平衡时的副本数

#### Rebalancing Blocks

New nodes can be added to a cluster in a straightforward manner. On the new node, the same Hadoop version and configuration ( conf/hadoop-site.xml ) as on the rest of the cluster should be installed. Starting the DataNode daemon on the machine will cause it to contact the NameNode and join the cluster. (The new node should be added to the slaves file on the master server as well, to inform the master how to invoke script-based commands on the new node.)

But the new DataNode will have no data on board initially; it is therefore not alleviating space concerns on the existing nodes. New files will be stored on the new DataNode in addition to the existing ones, but for optimum usage, storage should be evenly balanced across all nodes.

This can be achieved with the automatic balancer tool included with Hadoop. The Balancer class will intelligently balance blocks across the nodes to achieve an even distribution of blocks within a given threshold, expressed as a percentage. (The default is 10%.) Smaller percentages make nodes more evenly balanced, but may require more time to achieve this state. Perfect balancing (0%) is unlikely to actually be achieved.

The balancer script can be run by starting bin/start-balancer.sh in the Hadoop directory. The script can be provided a balancing threshold percentage with the -threshold parameter;

e.g., bin/start-balancer.sh -threshold 5 .

The balancer will automatically terminate when it achieves its goal, or when an error occurs, or it cannot find more candidate blocks to move to achieve better balance. The balancer can always be terminated safely by the administrator by running bin/stop-balancer.sh .

The balancing script can be run either when nobody else is using the cluster (e.g., overnight), but can also be run in an "online" fashion while many other jobs are on-going. To prevent the rebalancing process from consuming large amounts of bandwidth and significantly degrading the performance of other processes on the cluster, the dfs.balance.bandwidthPerSec configuration parameter can be used to limit the number of bytes/sec each node may devote to rebalancing its data store.

#### Copying Large Sets of Files

When migrating a large number of files from one location to another (either from one HDFS cluster to another, from S3 into HDFS or vice versa, etc), the task should be divided between multiple nodes to allow them all to share in the bandwidth required for the process. Hadoop includes a tool called distcp for this purpose.

By invoking bin/hadoop distcp src dest , Hadoop will start a MapReduce task to distribute the burden of copying a large number of files from src to dest . These two parameters may specify a full URL for the the path to copy. e.g., "hdfs://SomeNameNode:9000/foo/bar/" and "hdfs://OtherNameNode:2000/baz/quux/"will copy the children of /foo/bar on one cluster to the directory tree rooted at /baz/quux on the other. The paths are assumed to be directories, and are copied recursively. S3 URLs can be specified withs3://bucket-name /key .

#### 如何从集群中删除节点：

In addition to allowing nodes to be added to the cluster on the fly, nodes can also be removed from a cluster while it is running , without data loss. But if nodes are simply shut down "hard," data loss may occuras they may hold the sole copy of one or more file blocks.

Nodes must be retired on a schedule that allows HDFS to ensure that no blocks are entirely replicated within the to-be-retired set of DataNodes.

HDFS provides a decommissioning feature which ensures that this process is performed safely. To use it, follow the steps below:

Step 1: Cluster configuration . If it is assumed that nodes may be retired in your cluster, then before it is started, an excludes file must be configured. Add a key named dfs.hosts.exclude to your conf/hadoop-site.xml file. The value associated with this key provides the full path to a file on the NameNode's local file system which contains a list of machines which are not permitted to connect to HDFS.

Step 2: Determine hosts to decommission . Each machine to be decommissioned should be added to the file identified by dfs.hosts.exclude , one per line. This will prevent them from connecting to the NameNode.

Step 3: Force configuration reload . Run the command bin/hadoop dfsadmin -refreshNodes . This will force the NameNode to reread its configuration, including the newly-updated excludes file. It will decommission the nodes over a period of time, allowing time for each node's blocks to be replicated onto machines which are scheduled to remain active.

Step 4: Shutdown nodes . After the decommission process has completed, the decommissioned hardware can be safely shutdown for maintenance, etc. The bin/hadoop dfsadmin -report command will describe which nodes are connected to the cluster.

Step 5: Edit excludes file again . Once the machines have been decommissioned, they can be removed from the excludes file. Running bin/hadoop dfsadmin -refreshNodes again will read the excludes file back into the NameNode, allowing the DataNodes to rejoin the cluster after maintenance has been completed, or additional capacity is needed in the cluster again, etc.

#### Verifying File System Health

After decommissioning nodes, restarting a cluster, or periodically during its lifetime, you may want to ensure that the file system is healthy--that files are not corrupted or under-replicated, and that blocks are not missing.

Hadoop provides an fsck command to do exactly this. It can be launched at the command line like so:

  bin/hadoop fsck [path
] [options
]

If run with no arguments, it will print usage information and exit. If run with the argument / , it will check the health of the entire file system and print a report. If provided with a path to a particular directory or file, it will only check files under that path. If an option argument is given but no path, it will start from the file system root (/ ). The options may include two different types of options:

Action options specify what action should be taken when corrupted files are found. This can be -move , which moves corrupt files to /lost+found , or -delete , which deletes corrupted files.

Information options specify how verbose the tool should be in its report. The -files option will list all files it checks as it encounters them. This information can be further expanded by adding the -blocks option, which prints the list of blocks for each file. Adding -locations to these two options will then print the addresses of the DataNodes holding these blocks. Still more information can be retrieved by adding -racksto the end of this list, which then prints the rack topology information for each location. (See the next subsection for more information on configuring network rack awareness.) Note that the later options do not imply the former; you must use them in conjunction with one another. Also, note that the Hadoop program uses -files in a "common argument parser" shared by the different commands such as dfsadmin , fsck ,dfs , etc. This means that if you omit a path argument to fsck, it will not receive the -files option that you intend. You can separate common options from fsck-specific options by using -- as an argument, like so:

  bin/hadoop fsck -- -files -blocks

The -- is not required if you provide a path to start the check from, or if you specify another argument first such as -move .

By default, fsck will not operate on files still open for write by another client. A list of such files can be produced with the -openforwrite option.

©️2019 CSDN 皮肤主题: 大白 设计师: CSDN官方博客