QinQ工作原理

一、基础知识

二、场景

三、配置

SW1

interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 20 30
#
interface GigabitEthernet0/0/2
 port link-type access
 port default vlan 20
#
interface GigabitEthernet0/0/3
 port link-type access
 port default vlan 30
#

SW2

interface GigabitEthernet0/0/1
 port link-type dot1q-tunnel
 port default vlan 10
#
interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 10

SW3

interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 10
#
interface GigabitEthernet0/0/2
 port link-type dot1q-tunnel
 port default vlan 10
#

SW4

interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 20 30
#
interface GigabitEthernet0/0/2
 port link-type access
 port default vlan 20
#
interface GigabitEthernet0/0/3
 port link-type access
 port default vlan 30

业务名称	vlan区间	外层vlan
租户1	20	10
租户2	30	10

PC1中的数据——>进入SW2的GE0/0/1的报文封装外层vlan 10,反之相同

SW2<——>SW3允许VLAN10的报文通过

转载于:https://blog.51cto.com/maguangjie/1899275