拓朴如下图：
   
说明：
1 、使用使用 VRF-PBR 使连到同一 PE 上的多个 VRF 间可以互通。
2 、使用 MP BGP 使用同一 ××× 的不同点、不同 ××× 间可以互通。
 
配置说明：
1 、 R5 、 R6 无过多配置，只有接口 IP 地址、 RIP 的配置。
2 、在 R4 上配置 VRF PBR 使用 R5 与 R6 之间 PING 通。
3 、 R2\R3\R4 启 OSPF 、 MPLS IP ，并在 R2\R4 启 MP BGP
4 、 R2 启针计 CE 的 RIP ；并在 R2\R4 上把 RIP 和 MP BGP 之间相互重分发。
 
配置如下：
 
hostname R6
!
 
 
!
interface Loopback1
 ip address 6.0.0.6 255.255.255.0
!
interface FastEthernet0/0
 ip address 192.168.46.6 255.255.255.0
 duplex auto
 speed auto
!
 
ip route 0.0.0.0 0.0.0.0 192.168.46.4
\\ R6 上的不启用任何的路由协议，采用默认路由。
 
 
 
hostname R5
!
no ip domain lookup
no ipv6 cef
!
interface Loopback1
 ip address 5.0.0.5 255.255.255.255
!
interface FastEthernet0/0
 ip address 192.168.45.5 255.255.255.0
 duplex auto
 speed auto
 
!
router rip
 version 2
 network 5.0.0.0
 network 192.168.45.0
 no auto-summary
!
\\ R5 的 RIP 配置主要通 R4 的 ×××15 进行路由，学习到 R1 上 ×××15 的路由
 
hostname R1       
!
ip vrf 15     \\ VRF 配置
 rd 1:5
 route-target export 1:5
 route-target import 1:5
 route-target export 1:100
 route-target import 1:100
!
ip vrf 16
 rd 1:6
 route-target export 1:6
 route-target import 1:6
 route-target export 1:100
 route-target import 1:100
!
interface Loopback15
 ip vrf forwarding 15
 ip address 15.0.0.1 255.255.255.0
!
interface Loopback16
 ip vrf forwarding 16
 ip address 16.0.0.1 255.255.255.0
!
interface FastEthernet0/0
 ip vrf forwarding 15   \\ 将 F0/0 接口划入 ×××15
 ip address 192.168.1.1 255.255.255.0
 duplex auto
 speed auto
!        
interface FastEthernet0/1
 ip vrf forwarding 16
 ip address 192.168.2.1 255.255.255.0
 duplex auto
 speed auto
!
router rip
 version 2
 no auto-summary
 !
 address-family ipv4 vrf 16 \\ 启用 VRF 路由 RIP
 network 16.0.0.0
 network 192.168.2.0
 no auto-summary
 version 2
 exit-address-family
 !
 address-family ipv4 vrf 15
 network 15.0.0.0
 network 192.168.1.0
 no auto-summary
 version 2
 exit-address-family
!
 
 
 
hostname R3
!
ip cef
mpls ip
mpls label protocol ldp
 
!
interface Ethernet1/0
 ip address 192.168.23.3 255.255.255.0
 duplex half
 mpls label protocol ldp
 mpls ip
!
interface Ethernet1/1
 ip address 192.168.34.3 255.255.255.0
 duplex half
 mpls label protocol ldp
 mpls ip
!
router ospf 1
 network 192.168.23.0 0.0.0.255 area 0
 network 192.168.34.0 0.0.0.255 area 0
!
 
hostname R4
 
ip cef
 
!
no ip domain lookup
ip vrf 15
 rd 1:5
 route-target export 1:5
 route-target import 1:5
 route-target export 1: 100
 route-target import 1: 100
 
!
ip vrf 16
 rd 1:6
 route-target export 1:6
 route-target import 1:6
 route-target export 1: 100
 route-target import 1: 100
 
!
mpls label protocol ldp
!
interface Loopback0
 ip address 4.4.4.4 255.255.255.255
!        
interface Loopback1
 ip address 4.0.0.4 255.255.255.0
!
interface FastEthernet0/0
 ip vrf forwarding 15
 ip address 192.168.45.4 255.255.255.0
 ip policy route-map 15
\\ 在使用 R5pingR6 是使用的 PBR ， MPBGP 时要删除
 duplex auto
 speed auto
!
interface FastEthernet0/1
 ip vrf forwarding 16
 ip address 192.168.46.4 255.255.255.0
 ip policy route-map 16
\\ 在使用 R5pingR6 是使用的 PBR ， MPBGP 时要删除
 duplex auto
 speed auto
!
interface Ethernet1/0
 ip address 192.168.34.4 255.255.255.0
 duplex half
 mpls label protocol ldp
 mpls ip
!
router ospf 1
 log-adjacency-changes
 network 4.0.0.0 0.0.0.255 area 0
 network 4.4.4.0 0.0.0.255 area 0
 network 192.168.34.0 0.0.0.255 area 0
!
router rip
 !
 address-family ipv4 vrf 15
  redistribute bgp 65533 metric transparent \\ 重分发
  network 192.168.45.0
  no auto-summary
  version 2
 exit-address-family
!
router bgp 65533
 no synchronization
 bgp log-neighbor-changes
 neighbor 2.2.2.2 remote-as 65533
 neighbor 2.2.2.2 update-source Loopback0
 no auto-summary
 !
 address-family ***v4
  neighbor 2.2.2.2 activate
  neighbor 2.2.2.2 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf 16
  redistribute static \\ 重分发
  no synchronization
 exit-address-family
 !
 address-family ipv4 vrf 15
  redistribute static
  redistribute rip  \\ 重分发
  no synchronization
 exit-address-family
!
ip route vrf 16 6.0.0.0 255.255.255.0 192.168.46.6
!
 
access-list 100 permit ip host 192.168.45.5 host 6.0.0.6
access-list 100 permit ip host 5.0.0.5 host 6.0.0.6
access-list 101 permit ip host 192.168.46.6 host 5.0.0.5
access-list 101 permit ip host 6.0.0.6 host 5.0.0.5
!
 
route-map 15 permit 10
 match ip address 100
 set ip vrf 16 next-hop 192.168.46.6   \\ 关联 VRF 16 的路由
!
route-map 15 permit 20
!
route-map 16 permit 10
 match ip address 101
 set ip vrf 15 next-hop 192.168.45.5 \\ 关联 VRF 15 的路由
!
route-map 16 permit 20
!
 
hostname R2
 
ip cef
 
no ip domain lookup
ip vrf 15
 rd 1:5
 route-target export 1:5
 route-target import 1:5
 route-target export 1: 100
 route-target import 1: 100
!
ip vrf 16
 rd 1:6
 route-target export 1:6
 route-target import 1:6
 route-target export 1: 100
 route-target import 1: 100
 
!
interface Loopback1
 ip address 2.2.2.2 255.255.255.255
!        
interface FastEthernet0/0
 ip vrf forwarding 15
 ip address 192.168.1.2 255.255.255.0
 duplex auto
 speed auto
!
interface FastEthernet0/1
 ip vrf forwarding 16
 ip address 192.168.2.2 255.255.255.0
 duplex auto
 speed auto
!
interface Ethernet1/0
 ip address 192.168.23.2 255.255.255.0
 duplex half
 mpls label protocol ldp
 mpls ip
!
router ospf 1
 log-adjacency-changes
 network 2.2.2.0 0.0.0.255 area 0
 network 192.168.23.0 0.0.0.255 area 0
!
router rip
 !
 address-family ipv4 vrf 16
  network 192.168.2.0
  no auto-summary
  version 2
 exit-address-family
 !
 address-family ipv4 vrf 15
  redistribute bgp 65533 metric transparent
  network 192.168.1.0
  no auto-summary
  version 2
 exit-address-family
!
router bgp 65533
 no synchronization
 bgp log-neighbor-changes
 neighbor 4.4.4.4 remote-as 65533
 neighbor 4.4.4.4 update-source Loopback1
 no auto-summary
 !
 address-family ***v4
  neighbor 4.4.4.4 activate
  neighbor 4.4.4.4 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf 16
  redistribute static
  no synchronization
 exit-address-family
 !
 address-family ipv4 vrf 15
  redistribute rip
  no synchronization
 exit-address-family
!