实验目的：
1。将sdb，sdc,sdd3块硬盘组成raid5模式
2。建立LVM
3。模拟故障，sdc出故障，删除该硬盘，再重新添加硬盘，恢复raid5
4。增加LVM容量
实验步骤
1，格式化3块硬盘
[root@RHEL5-1 ~]# fdisk /dev/sdb //格式化/dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
[root@RHEL5-1 ~]# fdisk /dev/sdb //格式化/dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help):
n //增加一个新的分区
Command action
e extended
p primary partition (1-4)
p //创建主分区
Partition number (1-4): 1 //分区号为1
First cylinder (1-130, default 1): //设置分区大小
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-130, default 130):
Using default value 130
Command action
e extended
p primary partition (1-4)
p //创建主分区
Partition number (1-4): 1 //分区号为1
First cylinder (1-130, default 1): //设置分区大小
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-130, default 130):
Using default value 130
Command (m for help):
t //改变系统的ID
Selected partition 1
Hex code (type L to list codes): fd //设置系统HEX为fd，即raid模式
Changed system type of partition 1 to fd (Linux raid autodetect)
Selected partition 1
Hex code (type L to list codes): fd //设置系统HEX为fd，即raid模式
Changed system type of partition 1 to fd (Linux raid autodetect)
Command (m for help):
w //保存
The partition table has been altered!
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@RHEL5-1 ~]# fdisk /dev/sdc //格式化/dev/sdc
Syncing disks.
[root@RHEL5-1 ~]# fdisk /dev/sdc //格式化/dev/sdc
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help):
n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-130, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-130, default 130):
Using default value 130
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-130, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-130, default 130):
Using default value 130
Command (m for help):
t
Selected partition 1
Hex code (type L to list codes): fd
Changed system type of partition 1 to fd (Linux raid autodetect)
Selected partition 1
Hex code (type L to list codes): fd
Changed system type of partition 1 to fd (Linux raid autodetect)
Command (m for help):
w
The partition table has been altered!
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@RHEL5-1 ~]# fdisk /dev/sdd //格式化/dev/sdd
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Syncing disks.
[root@RHEL5-1 ~]# fdisk /dev/sdd //格式化/dev/sdd
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help):
n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-130, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-130, default 130):
Using default value 130
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-130, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-130, default 130):
Using default value 130
Command (m for help):
t
Selected partition 1
Hex code (type L to list codes): fd
Changed system type of partition 1 to fd (Linux raid autodetect)
Selected partition 1
Hex code (type L to list codes): fd
Changed system type of partition 1 to fd (Linux raid autodetect)
Command (m for help):
w
The partition table has been altered!
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@RHEL5-1 ~]# fdisk -l //查看分区情况
Syncing disks.
[root@RHEL5-1 ~]# fdisk -l //查看分区情况
Disk /dev/sda: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 268 2048287+ 83 Linux
/dev/sda3 269 395 1020127+ 83 Linux
/dev/sda4 396 1044 5213092+ 5 Extended
/dev/sda5 396 522 1020096 82 Linux swap / Solaris
/dev/sda6 523 1044 4192933+ 83 Linux
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 268 2048287+ 83 Linux
/dev/sda3 269 395 1020127+ 83 Linux
/dev/sda4 396 1044 5213092+ 5 Extended
/dev/sda5 396 522 1020096 82 Linux swap / Solaris
/dev/sda6 523 1044 4192933+ 83 Linux
Disk /dev/sdb: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 130 1044193+ fd Linux raid autodetect
/dev/sdb1 1 130 1044193+ fd Linux raid autodetect
Disk /dev/sdc: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 130 1044193+ fd Linux raid autodetect
/dev/sdc1 1 130 1044193+ fd Linux raid autodetect
Disk /dev/sdd: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 130 1044193+ fd Linux raid autodetect
/dev/sdd1 1 130 1044193+ fd Linux raid autodetect
建立raid5
[root@RHEL5-1 ~]# mdadm --create /dev/md0 --level=5 --raid-device=3 /dev/sdb1 /d
ev/sdc1 /dev/sdd1 //创建raid5，/dev/md0阵列设备名，level=5阵列模式raid5，raid-device=3raid有3块硬盘
mdadm: array /dev/md0 started.
[root@RHEL5-1 ~]# cat /proc/mdstat //查看数据同步情况
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[3] sdc1[1] sdb1[0]
2088192 blocks level 5, 64k chunk, algorithm 2 [3/2] [UU_]
[========>............] recovery = 40.0% (419060/1044096) finish=1.4min speed=7423K/sec
unused devices: <none>
[root@RHEL5-1 ~]# cat /proc/mdstat //看到这个说明同步结束
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[2] sdc1[1] sdb1[0]
2088192 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
unused devices: <none>
[root@RHEL5-1 ~]# tail /var/log/messages //查看系统日志
Jun 1 11:34:10 RHEL5-1 kernel: md: syncing RAID array md0
Jun 1 11:34:13 RHEL5-1 kernel: md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
Jun 1 11:34:15 RHEL5-1 kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
Jun 1 11:34:19 RHEL5-1 kernel: md: using 128k window, over a total of 1044096 blocks.
Jun 1 11:36:01 RHEL5-1 kernel: md: md0: sync done.
Jun 1 11:36:01 RHEL5-1 kernel: RAID5 conf printout:
Jun 1 11:36:01 RHEL5-1 kernel: --- rd:3 wd:3 fd:0
Jun 1 11:36:01 RHEL5-1 kernel: disk 0, o:1, dev:sdb1
Jun 1 11:36:01 RHEL5-1 kernel: disk 1, o:1, dev:sdc1
Jun 1 11:36:01 RHEL5-1 kernel: disk 2, o:1, dev:sdd1
[root@RHEL5-1 ~]# mdadm --create /dev/md0 --level=5 --raid-device=3 /dev/sdb1 /d
ev/sdc1 /dev/sdd1 //创建raid5，/dev/md0阵列设备名，level=5阵列模式raid5，raid-device=3raid有3块硬盘
mdadm: array /dev/md0 started.
[root@RHEL5-1 ~]# cat /proc/mdstat //查看数据同步情况
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[3] sdc1[1] sdb1[0]
2088192 blocks level 5, 64k chunk, algorithm 2 [3/2] [UU_]
[========>............] recovery = 40.0% (419060/1044096) finish=1.4min speed=7423K/sec
unused devices: <none>
[root@RHEL5-1 ~]# cat /proc/mdstat //看到这个说明同步结束
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[2] sdc1[1] sdb1[0]
2088192 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
unused devices: <none>
[root@RHEL5-1 ~]# tail /var/log/messages //查看系统日志
Jun 1 11:34:10 RHEL5-1 kernel: md: syncing RAID array md0
Jun 1 11:34:13 RHEL5-1 kernel: md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
Jun 1 11:34:15 RHEL5-1 kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
Jun 1 11:34:19 RHEL5-1 kernel: md: using 128k window, over a total of 1044096 blocks.
Jun 1 11:36:01 RHEL5-1 kernel: md: md0: sync done.
Jun 1 11:36:01 RHEL5-1 kernel: RAID5 conf printout:
Jun 1 11:36:01 RHEL5-1 kernel: --- rd:3 wd:3 fd:0
Jun 1 11:36:01 RHEL5-1 kernel: disk 0, o:1, dev:sdb1
Jun 1 11:36:01 RHEL5-1 kernel: disk 1, o:1, dev:sdc1
Jun 1 11:36:01 RHEL5-1 kernel: disk 2, o:1, dev:sdd1
建立raid5的配置文件
[root@RHEL5-1 ~]# echo device /dev/sdb1 /dev/sdc1 /dev/sdd1 > /etc/mdadm.conf
[root@RHEL5-1 ~]# mdadm --detail --scan >> /etc/mdadm.conf
[root@RHEL5-1 ~]# cat /etc/mdadm.conf
device /dev/sdb1 /dev/sdc1 /dev/sdd1
ARRAY /dev/md0 level=raid5 num-devices=3 UUID=36f261b7:4899a54c:9edf36d1:9eb86529
[root@RHEL5-1 ~]# mdadm -S /dev/md0 //停止阵列
mdadm: stopped /dev/md0
[root@RHEL5-1 ~]# mdadm -As /dev/md0 //启动阵列
mdadm: /dev/md0 has been started with 3 drives.
[root@RHEL5-1 ~]# echo device /dev/sdb1 /dev/sdc1 /dev/sdd1 > /etc/mdadm.conf
[root@RHEL5-1 ~]# mdadm --detail --scan >> /etc/mdadm.conf
[root@RHEL5-1 ~]# cat /etc/mdadm.conf
device /dev/sdb1 /dev/sdc1 /dev/sdd1
ARRAY /dev/md0 level=raid5 num-devices=3 UUID=36f261b7:4899a54c:9edf36d1:9eb86529
[root@RHEL5-1 ~]# mdadm -S /dev/md0 //停止阵列
mdadm: stopped /dev/md0
[root@RHEL5-1 ~]# mdadm -As /dev/md0 //启动阵列
mdadm: /dev/md0 has been started with 3 drives.
2 建立LVM
[root@RHEL5-1 ~]# pvcreate /dev/md0 //建立PV
Physical volume "/dev/md0" successfully created
[root@RHEL5-1 ~]# vgcreate lvm1 /dev/md0 //建立VG
Volume group "lvm1" successfully created
[root@RHEL5-1 ~]# vgdisplay //查看VG
--- Volume group ---
VG Name lvm1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 1.99 GB
PE Size 4.00 MB
Total PE 509
Alloc PE / Size 0 / 0
Free PE / Size 509 / 1.99 GB
VG UUID h7d74U-S38z-rQrw-ecGG-ePlg-48b5-87sbC1
[root@RHEL5-1 ~]# lvcreate -L 500m -n web1 lvm1 //建立LV ，名为web1，大小为500M
Logical volume "web1" created
[root@RHEL5-1 ~]# lvcreate -L 500m -n web2 lvm1 //建立LV ，名为web2，大小为500M
Logical volume "web2" created
[root@RHEL5-1 ~]# mke2fs -j /dev/lvm1/web1 //格式化web1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
128016 inodes, 512000 blocks
25600 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
63 block groups
8192 blocks per group, 8192 fragments per group
2032 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
[root@RHEL5-1 ~]# pvcreate /dev/md0 //建立PV
Physical volume "/dev/md0" successfully created
[root@RHEL5-1 ~]# vgcreate lvm1 /dev/md0 //建立VG
Volume group "lvm1" successfully created
[root@RHEL5-1 ~]# vgdisplay //查看VG
--- Volume group ---
VG Name lvm1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 1.99 GB
PE Size 4.00 MB
Total PE 509
Alloc PE / Size 0 / 0
Free PE / Size 509 / 1.99 GB
VG UUID h7d74U-S38z-rQrw-ecGG-ePlg-48b5-87sbC1
[root@RHEL5-1 ~]# lvcreate -L 500m -n web1 lvm1 //建立LV ，名为web1，大小为500M
Logical volume "web1" created
[root@RHEL5-1 ~]# lvcreate -L 500m -n web2 lvm1 //建立LV ，名为web2，大小为500M
Logical volume "web2" created
[root@RHEL5-1 ~]# mke2fs -j /dev/lvm1/web1 //格式化web1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
128016 inodes, 512000 blocks
25600 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
63 block groups
8192 blocks per group, 8192 fragments per group
2032 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 26 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@RHEL5-1 ~]# mke2fs -j /dev/lvm1/web2 //格式化web1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
128016 inodes, 512000 blocks
25600 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
63 block groups
8192 blocks per group, 8192 fragments per group
2032 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@RHEL5-1 ~]# mke2fs -j /dev/lvm1/web2 //格式化web1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
128016 inodes, 512000 blocks
25600 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
63 block groups
8192 blocks per group, 8192 fragments per group
2032 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 39 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@RHEL5-1 ~]# mkdir /web1
[root@RHEL5-1 ~]# mkdir /web2
[root@RHEL5-1 ~]# mount /dev/lvm1/web1 /web1 //挂载
[root@RHEL5-1 ~]# mount /dev/lvm1/web2 /web2
[root@RHEL5-1 ~]# vi /etc/fstab //编辑/etc/fstab，让系统启动时自动挂载
LABEL=/ / ext3 defaults 1 1
LABEL=/var /var ext3 defaults 1 2
LABEL=/tmp /tmp ext3 defaults 1 2
LABEL=/boot /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
LABEL=SWAP-sda5 swap swap defaults 0 0
/dev/lvm1/web1 /web1 ext3 defaults 0 0
/dev/lvm1/web2 /web2 ext3 defaults 0 0
[root@RHEL5-1 ~]# reboot
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@RHEL5-1 ~]# mkdir /web1
[root@RHEL5-1 ~]# mkdir /web2
[root@RHEL5-1 ~]# mount /dev/lvm1/web1 /web1 //挂载
[root@RHEL5-1 ~]# mount /dev/lvm1/web2 /web2
[root@RHEL5-1 ~]# vi /etc/fstab //编辑/etc/fstab，让系统启动时自动挂载
LABEL=/ / ext3 defaults 1 1
LABEL=/var /var ext3 defaults 1 2
LABEL=/tmp /tmp ext3 defaults 1 2
LABEL=/boot /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
LABEL=SWAP-sda5 swap swap defaults 0 0
/dev/lvm1/web1 /web1 ext3 defaults 0 0
/dev/lvm1/web2 /web2 ext3 defaults 0 0
[root@RHEL5-1 ~]# reboot
查看/web1的容量
[root@RHEL5-1 ~]# df -h /web1
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/lvm1-web1
485M 11M 449M 3% /web1
[root@RHEL5-1 ~]# pvdisplay
--- Physical volume ---
PV Name /dev/md0
VG Name lvm1
PV Size 1.99 GB / not usable 3.25 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 509
Free PE 259
Allocated PE 250
PV UUID HSyAfx-Qxdv-b6id-01sZ-eRVC-HWAj-By3ctA
3模拟故障
[root@RHEL5-1 ~]# mdadm /dev/md0 -f /dev/sdc1 //标记/dev/sdc1为故障盘
mdadm: set /dev/sdc1 faulty in /dev/md0
[root@RHEL5-1 ~]# more /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[2] sdc1[3](F) sdb1[0] //[F]表示为故障盘
2088192 blocks level 5, 64k chunk, algorithm 2 [3/2] [U_U]
unused devices: <none>
[root@RHEL5-1 ~]# mdadm /dev/md0 -r /dev/sdc1 //移除故障盘
mdadm: hot removed /dev/sdc1
[root@RHEL5-1 ~]# more /proc/mdstat //查看阵列情况
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[2] sdb1[0]
2088192 blocks level 5, 64k chunk, algorithm 2 [3/2] [U_U]
unused devices: <none>
[root@RHEL5-1 ~]# pvdisplay /dev/md0 //查看PV情况，发现容量没减少
--- Physical volume ---
PV Name /dev/md0
VG Name lvm1
PV Size 1.99 GB / not usable 3.25 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 509
Free PE 259
Allocated PE 250
PV UUID HSyAfx-Qxdv-b6id-01sZ-eRVC-HWAj-By3ctA
[root@RHEL5-1 ~]# fdisk /dev/sdc //重新格式化sdc，重新添加进阵列
[root@RHEL5-1 ~]# df -h /web1
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/lvm1-web1
485M 11M 449M 3% /web1
[root@RHEL5-1 ~]# pvdisplay
--- Physical volume ---
PV Name /dev/md0
VG Name lvm1
PV Size 1.99 GB / not usable 3.25 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 509
Free PE 259
Allocated PE 250
PV UUID HSyAfx-Qxdv-b6id-01sZ-eRVC-HWAj-By3ctA
3模拟故障
[root@RHEL5-1 ~]# mdadm /dev/md0 -f /dev/sdc1 //标记/dev/sdc1为故障盘
mdadm: set /dev/sdc1 faulty in /dev/md0
[root@RHEL5-1 ~]# more /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[2] sdc1[3](F) sdb1[0] //[F]表示为故障盘
2088192 blocks level 5, 64k chunk, algorithm 2 [3/2] [U_U]
unused devices: <none>
[root@RHEL5-1 ~]# mdadm /dev/md0 -r /dev/sdc1 //移除故障盘
mdadm: hot removed /dev/sdc1
[root@RHEL5-1 ~]# more /proc/mdstat //查看阵列情况
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[2] sdb1[0]
2088192 blocks level 5, 64k chunk, algorithm 2 [3/2] [U_U]
unused devices: <none>
[root@RHEL5-1 ~]# pvdisplay /dev/md0 //查看PV情况，发现容量没减少
--- Physical volume ---
PV Name /dev/md0
VG Name lvm1
PV Size 1.99 GB / not usable 3.25 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 509
Free PE 259
Allocated PE 250
PV UUID HSyAfx-Qxdv-b6id-01sZ-eRVC-HWAj-By3ctA
[root@RHEL5-1 ~]# fdisk /dev/sdc //重新格式化sdc，重新添加进阵列
Command (m for help):
n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
Partition 1 is already defined. Delete it before re-adding it.
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
Partition 1 is already defined. Delete it before re-adding it.
Command (m for help):
t
Selected partition 1
Hex code (type L to list codes): fd
Selected partition 1
Hex code (type L to list codes): fd
Command (m for help):
w
The partition table has been altered!
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@RHEL5-1 ~]# mdadm /dev/md0 -a /dev/sdc1 //增加
mdadm: re-added /dev/sdc1
[root@RHEL5-1 ~]# more /proc/mdstat //开始同步数据
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdc1[1] sdd1[2] sdb1[0]
2088192 blocks level 5, 64k chunk, algorithm 2 [3/2] [U_U]
[==>..................] recovery = 12.2% (128796/1044096) finish=2.1min s
peed=7155K/sec
unused devices: <none>
[root@RHEL5-1 ~]# pvdisplay
--- Physical volume ---
PV Name /dev/md0
VG Name lvm1
PV Size 1.99 GB / not usable 3.25 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 509
Free PE 259
Allocated PE 250
PV UUID HSyAfx-Qxdv-b6id-01sZ-eRVC-HWAj-By3ctA
[root@RHEL5-1 ~]# vgdisplay lvm1
--- Volume group ---
VG Name lvm1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 1
Act PV 1
VG Size 1.99 GB
PE Size 4.00 MB
Total PE 509
Alloc PE / Size 250 / 1000.00 MB
Free PE / Size 259 / 1.01 GB
VG UUID h7d74U-S38z-rQrw-ecGG-ePlg-48b5-87sbC1
[root@RHEL5-1 ~]# df -h /web1
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/lvm1-web1
485M 11M 449M 3% /web1
Syncing disks.
[root@RHEL5-1 ~]# mdadm /dev/md0 -a /dev/sdc1 //增加
mdadm: re-added /dev/sdc1
[root@RHEL5-1 ~]# more /proc/mdstat //开始同步数据
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdc1[1] sdd1[2] sdb1[0]
2088192 blocks level 5, 64k chunk, algorithm 2 [3/2] [U_U]
[==>..................] recovery = 12.2% (128796/1044096) finish=2.1min s
peed=7155K/sec
unused devices: <none>
[root@RHEL5-1 ~]# pvdisplay
--- Physical volume ---
PV Name /dev/md0
VG Name lvm1
PV Size 1.99 GB / not usable 3.25 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 509
Free PE 259
Allocated PE 250
PV UUID HSyAfx-Qxdv-b6id-01sZ-eRVC-HWAj-By3ctA
[root@RHEL5-1 ~]# vgdisplay lvm1
--- Volume group ---
VG Name lvm1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 1
Act PV 1
VG Size 1.99 GB
PE Size 4.00 MB
Total PE 509
Alloc PE / Size 250 / 1000.00 MB
Free PE / Size 259 / 1.01 GB
VG UUID h7d74U-S38z-rQrw-ecGG-ePlg-48b5-87sbC1
[root@RHEL5-1 ~]# df -h /web1
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/lvm1-web1
485M 11M 449M 3% /web1
4。增加LVM容量
[root@RHEL5-1 ~]# lvextend -L +50M /dev/lvm1/web1 //增加web1 50M
Rounding up size to full physical extent 52.00 MB
Extending logical volume web1 to 552.00 MB
Logical volume web1 successfully resized
[root@RHEL5-1 ~]# resize2fs /dev/lvm1/web1 //刷新
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/lvm1/web1 is mounted on /web1; on-line resizing required
Performing an on-line resize of /dev/lvm1/web1 to 565248 (1k) blocks.
The filesystem on /dev/lvm1/web1 is now 565248 blocks long.
[root@RHEL5-1 ~]# lvextend -L +50M /dev/lvm1/web1 //增加web1 50M
Rounding up size to full physical extent 52.00 MB
Extending logical volume web1 to 552.00 MB
Logical volume web1 successfully resized
[root@RHEL5-1 ~]# resize2fs /dev/lvm1/web1 //刷新
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/lvm1/web1 is mounted on /web1; on-line resizing required
Performing an on-line resize of /dev/lvm1/web1 to 565248 (1k) blocks.
The filesystem on /dev/lvm1/web1 is now 565248 blocks long.
[root@RHEL5-1 ~]#
df -h /web1
//查看
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/lvm1-web1
535M 11M 498M 3% /web1
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/lvm1-web1
535M 11M 498M 3% /web1
转载于:https://blog.51cto.com/sookk8/335579
2492
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
