ubuntu 100M 到 10M

最新推荐文章于 2023-06-16 14:09:59 发布

weixin_34023982

最新推荐文章于 2023-06-16 14:09:59 发布

阅读量234

点赞数

浅析ubuntu下如何修改网卡网速--将100M网卡改为10M网卡

公司的路由器可能比较陈旧,机器启动之后,默认网卡是100M的,但是登录QQ经常出现掉线现象,后来得知原来需要将100M网卡降频到10M才能正常使用,果然修改之后thunderbird收发邮件也嗖嗖的了,

luther@gliethttp:~$ sudo apt-get install ethtool net-tools
/*删除luther@gliethttp:~$ sudo ethtool -s eth0 autoneg off // 不然网络会自动断开,自动重启网卡之后会重新获得100M,所以将导致不能修改10M成功,必须关闭自动.
luther@gliethttp:~$ sudo ethtool -s eth0 speed 10 duplex half
luther@gliethttp:~$ sudo service networking restart */
luther@gliethttp:~$ sudo ethtool -s eth0 speed 10 duplex half autoneg on

=============================================
luther@gliethttp:~$ sudo mii-tool eth0
eth0: negotiated 100baseTx-FD, link ok

luther@gliethttp:~$ sudo ethtool eth0
Settings for eth0:
   Supported ports: [ TP MII ]
   Supported link modes:   10baseT/Half 10baseT/Full
                            100baseT/Half 100baseT/Full
   Supports auto-negotiation: Yes
   Advertised link modes: 10baseT/Half 10baseT/Full
                            100baseT/Half 100baseT/Full
   Advertised auto-negotiation: Yes
   Speed: 100Mb/s
   Duplex: Full
   Port: MII
   PHYAD: 32
   Transceiver: internal
   Auto-negotiation: on
   Supports Wake-on: pumbg
   Wake-on: d
   Current message level: 0x00000007 (7)
   Link detected: yes

(PS:如果因为网络布线问题造成的不稳定,那么只能买个路由器,从稳定的工位作出口路由了[luther.gliethttp])