**Make sure all unused NICs are disabled and make sure the active NIC is configured for a static IP.
First NIC should be assigned to the parent only.
Open Hyper-V Manager:
Start > Administrative Tools > Hyper-V Manager.
Configure Hyper-V networking
Click Virtual Network Manager...
Verify no networks exist under Virtual Networks.
Under Create virtual network, select External, click Add.
Enter name of virtual network, 'DC', under External: select NIC ".....
Adapter #2", UNCHECK "Allow management operating system to share this network adapter then click OK.
Click Yes to the Apply Network Changes dialog.
Repeat steps 5-7 for the remaining adapters using the list above.
本文转simmy51CTO博客,原文链接:http://blog.51cto.com/helpdesk/920711
,如需转载请自行联系原作者