NA-NP-IE系列实验50: 单臂路由实现VLAN 间路由

实验50:  单臂路由实现VLAN 间路由

1.  实验目的

通过本实验，读者可以掌握如下技能：

（1）  路由器以太网接口上的子接口

（2）  单臂路由实现VLAN 间路由的配置

2.  实验拓扑

拓扑图

3.  实验步骤

 

 

Switch#vlan da

% Warning: It is recommended to configure VLAN from config mode,

  as VLAN database mode is being deprecated. Please consult user

  documentation for configuring VTP/VLAN in config mode.

 

Switch(vlan)#vlan 2 name cisco

VLAN 2 added:

    Name: cisco

Switch(vlan)#exit

APPLY completed.

Exiting....

Switch#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#int f0/1

Switch(config-if)#switch mode trunk//把f0/1配置成TRUNK模式

Switch(config-if)#exit

Switch(config)#int f0/2

Switch(config-if)#switch mode access

Switch(config-if)#switch access vlan 2//把f0/2划分到VLAN2

Switch(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

   

Router(config)#int f0/0

Router(config-if)#ip add 172.16.2.1 255.255.255.0

Router(config-if)#no sh

 

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#int f0/0.1创建子接口

 

%LINK-5-CHANGED: Interface FastEthernet0/0.1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.1, changed state to upRouter(config-subif)#enca dot1q 2封装DOT1Q,2代表VLAN2

Router(config-subif)#ip add 172.16.1.1 255.255.255.0

Router(config-subif)#no sh

Router(config-subif)#

 

PC1:

PC>ping 172.16.2.1

 

Pinging 172.16.2.1 with 32 bytes of data:

 

Reply from 172.16.2.1: bytes=32 time=110ms TTL=255

Reply from 172.16.2.1: bytes=32 time=63ms TTL=255

Reply from 172.16.2.1: bytes=32 time=63ms TTL=255

Reply from 172.16.2.1: bytes=32 time=63ms TTL=255

 

Ping statistics for 172.16.2.1:

    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

    Minimum = 63ms, Maximum = 110ms, Average = 74ms

 

PC>ping 172.16.2.2

 

Pinging 172.16.2.2 with 32 bytes of data:

 

Reply from 172.16.2.2: bytes=32 time=78ms TTL=127

Reply from 172.16.2.2: bytes=32 time=125ms TTL=127

Reply from 172.16.2.2: bytes=32 time=125ms TTL=127

Reply from 172.16.2.2: bytes=32 time=125ms TTL=127

 

Ping statistics for 172.16.2.2:

    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

    Minimum = 78ms, Maximum = 125ms, Average = 113ms

 

PC>

  PC0:

PC>ping 172.16.1.2

 

Pinging 172.16.1.2 with 32 bytes of data:

 

Reply from 172.16.1.2: bytes=32 time=172ms TTL=127

Reply from 172.16.1.2: bytes=32 time=110ms TTL=127

Reply from 172.16.1.2: bytes=32 time=125ms TTL=127

Reply from 172.16.1.2: bytes=32 time=125ms TTL=127

 

Ping statistics for 172.16.1.2:

    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

    Minimum = 110ms, Maximum = 172ms, Average = 133ms

 

PC>

本文转自gauyanm 51CTO博客，原文链接：http://blog.51cto.com/gauyanm/244712，如需转载请自行联系原作者