重置后没有密码。

方法一、直接按背后的小孔 5秒，不会影响数据。



方法二、telenet（根据微码版本不同，只能选择其中一条命令进行密码重置）

ping通后用telnet命令登入
尝试putty(Seeattached file: putty.zip)进行telnet，输入连接管理口的ip地址，连接类型选择：telnet，然后打开

账号 shellUsr
密码 wy3oo&w4（注意大小写）

We have below 3 commands to reset SMpasswd   (Please execute in CNTL-A command line)

1.  clearSYMbolPassword
Test OK in FW 06.60 and 07.60, can berun concurrently, no need to reboot CNTL

2.  symbolPwdReset
Test OK in FW 06.60 and 07.60, can berun concurrently, no need to reboot CNTL

-> symbolPwdReset

Are you sure that you want to reset theStorage Array Password ? (Y/N): y

 Storage Array Password resetsuccessful
value = 42 = 0x2a = '*'

3.spriMenuPwdReset
NOT work in FW 06.60 and 07.60, Test OKby PFE steven in FW 07.70, can be run concurrently, no need to reboot CNTL

> spriMenuPwdReset

Are you sure that you want to reset theStorage Array Password ? (Y/N): y

Storage Array Password reset successful
value = 42 = 0x2a = '*'

Note:  Beginning from FW 7.70, SMGUI password MUST be set, otherwise you can not open the subsystem managementwindow. You can not ignore the password warning message when you open the SM aspervious FW level.