VLAN Tagging in ESX (VST,EST & VGT)

I am getting lot of questions on  different types of VLAN tagging and how it works and how to configure it  and they are even wondering that there is no specific setting named  "VLAN tagging" in vsphere host network settings. Let's cover from the basics..

There are 3 types of VLAN tagging avaliable in Vsphere.

1.Virtual Switch Tagging (VST)
2.External Switch Tagging (EST)
3.Virtual Guest Tagging (VGT)

There is no specific settings named "VLAN Tagging" is avialable in the  vpshre host network settings. VLAN tagging is  determined by the VLAN  value specified at the port group and it tells the vswitch or Phyiscal switch or Virtual machines to how to handle the VLAN tagging.

1. Virtual Switch Tagging (VST)

1.1 VST uses 802.1q VLAN trunks and tagged traffic.
1.2 VLAN tagging for all packets is performed by the Virtual Switch before leaving the ESX/ESXI host
1.3 Port groups on the Virtual switch of ESX server should be configured with VLAN ID (1-4094)
1.4 vSwitch responsibilty is  to strip off the vlan tag and send packet to virtual machine in corresponding port group.
1.5 Reduces the number of Physical nics on the server by running all the  VLANs over one physical nic. Better solution would be keep 2 nics for  redundancy.
1.6 Reduces number of cables from ESX server to physical switch.
1.7 The physical switch port connecting the uplink from the ESX should be configured as Trunk port.
1.8 virtual machine network Packet is delivered to vSwitch and before it  is sent to physical switch the packet is tagged with vlan id according  to the port group memebership of originating virtual machine.

153110605.jpg


2.External Switch Tagging (EST)

2.1  In EST, ESX host doesn't see any vlan tags and does not handle any VLAN tagging.
2.2  All the tagging operation is done by physical switch and virtual switch is not aware about that.
2.3  Number of physical nics = no of VLANs connected to ESX
2.4  Port groups on the Virtual switch of ESX server need not to be  configured with the VLAN number or configure VLAN ID 0 (if it is not  native VLAN)
2.5  Count of NICS and cable connected to ESX is more as compared to VST approach.
2.6  The physical switch port connecting the uplink from the ESX should be configured as Access port assigned to specific VLAN.
2.7  virtual machine network Packet is delivered to physical switch  without any tagging operation performed by the virtual switch.



153154383.jpg

153213124.jpg

3. Virtual Guest Tagging (VGT)

3.1 you must install 8021.Q VLAN trunking driver instide virtual machine guest opearting system.
3.2 All the VLAN tagging is performed by the virtual machine with use of trunking driver in the guest.
3.3 VLAN tags are understandable only between the virtual machine and  external switch when frames are passed to/from virtual switches.
3.4 Virtual Switch will not be involved or aware of this operation.  Vswitch only forwards the packets from Virtual machine to physical  switch and will not perform any operation.
3.5 Port group of the virtual machine should be configured with VLAN ID 4095
3.6 The physical switch port connecting the uplink from the ESX should be configured as Trunk port

153315249.jpg


Below is comparison table for the people want a comparison under single table

153340366.jpg



I hope it will be helpful to understand the concept of VLAN Tagging with the simple language. Happy reading.....!!!!!!!

144322871.jpg