文章更新历史：
2014-12-27 介绍ceph集群搭建,每台OSD主机跑1个OSD CRUSH
2014-12-29 改进自动配置脚本，每台OSD主机跑三个OSD CRUSH环境简介：
总共五台主机：
192.168.239.131 ceph-mon
192.168.239.132 ceph-mds
192.168.239.160 ceph-osd0
192.168.239.161 ceph-osd1
192.168.239.162 ceph-osd2期望目标：
在上述主机中跑三个mon节点，三个osd节点，两个mds节点，其中每个OSD节点跑三个OSD CRUSH
mon节点：ceph-mon , ceph-mds , ceph-osd0
osd节点：ceph-osd0 , ceph-osd1 , ceph-osd2
mds节点： ceph-mon , ceph-mds1、从suse.com官网注册一个账号，下载SLES 11 SP3和SUSE Cloud 4的ISO
2、给每个节点安装系统，然后设置两个安装源,一个OS，一个SUSE Cloud 4
3、配置ceph-mon到其他节点的root用户无密码登录ssh
4、复制ceph-mon节点的/etc/hosts到其他节点
5、安装ceph软件包
# zypper -n install ceph ceph-radosgw6、在ceph-mon节点上，使用setup.sh分别调用init-mon.sh , init-osd.sh , init-mds.sh自动配置mon,osd,mds。
setup.sh和init-mon.sh会进入当前目录下的./ceph文件夹，请务必在/etc以外的目录执行。
各个脚本的代码如下(仅供参考)：
(1) setup.sh
#!/bin/bash
### Stop all existed OSD nodes
printf "Killing all ceph-osd nodes..."
for i in 0 1 2;do
ssh ceph-osd$i "killall -TERM ceph-osd"
sleep 1
done
printf "Done\n"
printf "Killing all mon nodes..."
ssh ceph-mon killall -TERM ceph-mon
printf "Done\n"
### Initialize mon on this system
printf "Initializing ceph-mon nodes..."
./init-mon.sh
cd ./ceph
printf "Done\n"
### Initialize osd services on nodes
for i in 0 1 2;do
../init-osd.sh ceph-osd$i $i
sleep 1
done
### Initialize mds on remote node
printf "Initializing mds..."
for node in ceph-mon ceph-mds;do
../init-mds.sh $node
done
printf "Done\n"(2) init-mon.sh
#!/bin/bash
fsid=$(uuidgen)
mon_node=ceph-mon,ceph-mds,ceph-osd0
cluster_net=192.168.239.0/24
public_net=192.168.1.0/24
node_list=$(echo $mon_node | tr ',' ' ')
for node in $node_list;do
node_ip=$(ping -c 1 $node | head -n 1 | awk '{ print $3 }' | sed -e 's/(//' -e 's/)//')
if [ -n "$mon_ip_list" ];then
mon_ip_list="$mon_ip_list,$node_ip"
else
mon_ip_list="$node_ip"
fi
done
cat > ./clean-mon.sh <<EOF
killall -TERM ceph-mon
rm -f /etc/ceph/ceph.conf /etc/ceph/*.keyring
rm -f /var/lib/ceph/bootstrap-mds/* /var/lib/ceph/bootstrap-osd/*
rm -f /var/log/ceph/*.log
EOF
chmod 755 ./clean-mon.sh
for node in $node_list;do
scp -p ./clean-mon.sh $node:/tmp
ssh $node /tmp/clean-mon.sh
ssh $node "rm -fr /data/mon.$node"
ssh $node "mkdir -p /data/mon.$node"
done
confdir=./ceph
rm -fr $confdir
mkdir -p $confdir
cd $confdir
cat > ceph.conf << EOF
[global]
fsid = $fsid
mon initial members = $mon_node
mon host = $mon_ip_list
public network = $public_net
cluster network = $cluster_net
auth cluster required = cephx
auth service required = cephx
auth client required = cephx
osd journal size = 1024
filestore xattr use omap = true
EOF
ceph-authtool --create-keyring bootstrap-osd.keyring --gen-key -n client.bootstrap-osd
ceph-authtool --create-keyring bootstrap-mds.keyring --gen-key -n client.bootstrap-mds
ceph-authtool --create-keyring ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *'
ceph-authtool --create-keyring ceph.client.admin.keyring --gen-key -n client.admin --set-uid=0 --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow'
ceph-authtool ceph.mon.keyring --import-keyring ceph.client.admin.keyring
port_num=6789
for node in $node_list;do
scp -p ceph.conf ceph.client.admin.keyring $node:/etc/ceph
node_ip=$(ping -c 1 $node | head -n 1 | awk '{ print $3 }' | sed -e 's/(//' -e 's/)//')
map_list="$map_list --add $node $node_ip:$port_num"
done
monmaptool --create ./monmap.ceph $map_list --fsid $(grep fsid /etc/ceph/ceph.conf | awk '{ print $NF}')
for node in $node_list;do
scp ./monmap.ceph $node:/tmp/
### Make filesystem for ceph-mon
scp -p ceph.mon.keyring $node:/tmp
ssh $node ceph-mon --mkfs -i $node --monmap /tmp/monmap.ceph --keyring /tmp/ceph.mon.keyring --mon-data /data/mon.$node
### Start the ceph-mon service
ssh $node ceph-mon -i $node --mon-data /data/mon.$node
printf "Waiting for mon.$node started..."
sleep 5
printf "Done\n"
done
### Initialize bootstrap keyrings
ceph auth add client.bootstrap-mds mon 'allow profile bootstrap-mds' -i bootstrap-mds.keyring
ceph auth add client.bootstrap-osd mon 'allow profile bootstrap-osd' -i bootstrap-osd.keyring(3) init-osd.sh
#!/bin/bash
if [ $# -lt 1 ];then
printf "Usage:$0 {host}\n" $0
exit 1
fi
host=$1
weight=1.0
### Add the host bucket to osd tree
ceph osd crush add-bucket $host host
ceph osd crush move $host root=default
### Clean the OSD deomons first
ssh $host "killall -TERM ceph-osd"
ssh $host "rm -f /var/lib/ceph/bootstrap-osd/*keyring"
ssh $host "mkdir -p /var/lib/ceph/bootstrap-osd"
### Copy configuration files to destination host
scp ceph.conf ceph.client.admin.keyring $host:/etc/ceph
scp bootstrap-osd.keyring $host:/var/lib/ceph/bootstrap-osd/ceph.keyring
### Every host run 3 OSD daemons
printf "Initializing OSD for $host...\n"
for i in 0 1 2;do
osd_uuid=`uuidgen`
osd_num=$(ssh $host "ceph osd create $osd_uuid 2>&1")
ssh $host "rm -fr /data/osd.$osd_num"
ssh $host "mkdir -p /data/osd.$osd_num"
ssh $host "ceph-disk-prepare --osd-uuid $osd_uuid --fs-type xfs /data/osd.$osd_num"
ssh $host "ceph-osd -i $osd_num --osd-data /data/osd.$osd_num --osd-journal /data/osd.$osd_num/journal --mkkey --mkfs"
ssh $host "ceph auth add osd.$osd_num osd 'allow *' mon 'allow profile osd' -i /data/osd.$osd_num/keyring"
ssh $host "ceph osd crush add osd.$osd_num $weight host=$host"
ssh $host "ceph-osd -i $osd_num --osd-data /data/osd.$osd_num --osd-journal /data/osd.$osd_num/journal"
sleep 1
done
printf "Initializing OSD for $host...Done\n"(4) init-mds.sh
#!/bin/bash
if [ $# -lt 1 ];then
printf "Usage:$0 {host}}\n" $0
exit 1
fi
mds_host=$1
mds_name=mds.$mds_host
mds_data=/data/$mds_name
keyfile=ceph.$mds_host.keyring
mon_host=ceph-mon:6789
### Stop current running mds daemons first
ssh $mds_host "killall -TERM ceph-mds"
ssh $mds_host "rm -fr $mds_data"
ssh $mds_host "mkdir -p $mds_data"
### Clean the old keyring file first
if [ ! -e $keyfile ];then
### Create new keyring file
ceph-authtool -C -g -n $mds_name $keyfile
fi
ceph auth add $mds_name mon 'allow profile mds' osd 'allow rwx' mds 'allow' -i $keyfile
scp -p \
/etc/ceph/ceph.conf \
/etc/ceph/ceph.client.admin.keyring $mds_host:/etc/ceph
scp -p $keyfile $mds_host:$mds_data/keyring
ssh $mds_host "ceph-mds -i $mds_host -n $mds_name -m $mon_host --mds-data=/data/mds.$mds_host"脚本执行完之后会自动把服务启动，在ceph-mon节点上查看ceph集群状态：
ceph-mon:~ # ceph -s
cluster 484f6e40-e047-4448-a2e4-678493d122c6
health HEALTH_OK
monmap e1: 3 mons at {ceph-mds=192.168.239.132:6789/0,ceph-mon=192.168.239.131:6789/0,ceph-osd0=192.168.239.160:6789/0}, election epoch 6, quorum 0,1,2 ceph-mon,ceph-mds,ceph-osd0
mdsmap e4: 1/1/1 up {0=ceph-mon=up:active}, 1 up:standby
osdmap e44: 9 osds: 9 up, 9 in
pgmap v58: 192 pgs, 3 pools, 1884 bytes data, 20 objects
28136 MB used, 116 GB / 143 GB avail
192 active+cleanosd状态：
ceph-mon:~ # ceph osd tree
# id weight type name up/down reweight
-1 9 root default
-2 3 host ceph-osd0
0 1 osd.0 up 1
1 1 osd.1 up 1
2 1 osd.2 up 1
-3 3 host ceph-osd1
3 1 osd.3 up 1
4 1 osd.4 up 1
5 1 osd.5 up 1
-4 3 host ceph-osd2
6 1 osd.6 up 1
7 1 osd.7 up 1
8 1 osd.8 up 1在ceph-mon节点上查看进程：
ceph-mon:~ # ps ax |grep ceph-mon
8993 pts/0 Sl 0:00 ceph-mon -i ceph-mon --mon-data /data/ceph-mon在ceph-osdX节点上查看进程：
ceph-osd0:~ # ps ax | grep ceph-osd
13140 ? Ssl 0:02 ceph-osd -i 0 --osd-data /data/osd.0 --osd-journal /data/osd.0/journal在ceph-mds节点上查看进程：
ceph-mds:~ # ps ax |grep ceph-mds
42260 ? Ssl 0:00 ceph-mds -i ceph-mds -n mds.ceph-mds -m ceph-mon:6789 --mds-data=/data/mds.ceph-mds7、挂载cephfs的两种方式
(1) mount.ceph
由于SLES 11系列的内核还不支持ceph模块，您需要在客户端安装较高版本的内核才能获得mount.ceph的功能。mount.ceph命令用法如下：
mount.ceph {mon ip/host}:/ {mount point} -o name=admin,secret={your keyring}
mount.ceph ceph-mon:/ /mnt/cephfs -v -o name=admin,secret=AQD5jp5UqPRtCRAAvpRyhlNI0+qEHjZYqEZw8A==secret指定的密钥从/etc/ceph/ceph.client.admin.keyring文件获得，出于安全考虑，为了避免讲密钥暴露在命令历史中，请使用secretfile=指定包含密钥的文件。
(2) ceph-fuse
没有内核ceph模块的情况下可以用ceph-fuse来挂载文件系统，用法如下：
ceph-fuse ceph-mon:6789 /mnt/cephfs8、查看挂载状态：
ceph-mon:/etc/ceph # df -Ph
文件系统 容量 已用 可用 已用% 挂载点
/dev/mapper/rootvg-root 12G 5.3G 5.7G 49% /
udev 12G 5.3G 5.7G 49% /dev
tmpfs 12G 5.3G 5.7G 49% /dev/shm
/dev/sda1 185M 36M 141M 21% /boot
/dev/sdb1 16G 35M 16G 1% /data
192.168.239.131:/ 48G 3.2G 45G 7% /mnt/cephfs
87
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
