c#实现FTP上传

  1         /// <summary>
  2         /// 上传文件
  3         /// </summary>
  4         /// <param name="fileinfo">需要上传的文件</param>
  5         /// <param name="targetDir">目标路径</param>
  6         /// <param name="hostname">ftp地址</param>
  7         /// <param name="username">ftp用户名</param>
  8         /// <param name="password">ftp密码</param>
  9         public static void UploadFile(FileInfo fileinfo, string targetDir, string hostname, string username, string password)
 10         {
 11             //1. check target
 12             string target;
 13             if (targetDir.Trim() == "")
 14             {
 15                 return;
 16             }
 17             target = Guid.NewGuid().ToString();  //使用临时文件名
 18 
 19 
 20             string URI = "FTP://" + hostname + "/" + targetDir + "/" + target;
 21             ///WebClient webcl = new WebClient();
 22             System.Net.FtpWebRequest ftp = GetRequest(URI, username, password);
 23 
 24             //设置FTP命令 设置所要执行的FTP命令,
 25             //ftp.Method = System.Net.WebRequestMethods.Ftp.ListDirectoryDetails;//假设此处为显示指定路径下的文件列表
 26             ftp.Method = System.Net.WebRequestMethods.Ftp.UploadFile;
 27             //指定文件传输的数据类型
 28             ftp.UseBinary = true;
 29             ftp.UsePassive = true;
 30 
 31             //告诉ftp文件大小
 32             ftp.ContentLength = fileinfo.Length;
 33             //缓冲大小设置为2KB
 34             const int BufferSize = 2048;
 35             byte[] content = new byte[BufferSize - 1 + 1];
 36             int dataRead;
 37 
 38             //打开一个文件流 (System.IO.FileStream) 去读上传的文件
 39             using (FileStream fs = fileinfo.OpenRead())
 40             {
 41                 try
 42                 {
 43                     //把上传的文件写入流
 44                     using (Stream rs = ftp.GetRequestStream())
 45                     {
 46                         do
 47                         {
 48                             //每次读文件流的2KB
 49                             dataRead = fs.Read(content, 0, BufferSize);
 50                             rs.Write(content, 0, dataRead);
 51                         } while (!(dataRead < BufferSize));
 52                         rs.Close();
 53                     }
 54 
 55                 }
 56                 catch (Exception ex) { }
 57                 finally
 58                 {
 59                     fs.Close();
 60                 }
 61 
 62             }
 63 
 64             ftp = null;
 65             //设置FTP命令
 66             ftp = GetRequest(URI, username, password);
 67             ftp.Method = System.Net.WebRequestMethods.Ftp.Rename; //改名
 68             ftp.RenameTo = fileinfo.Name;
 69             try
 70             {
 71                 ftp.GetResponse();
 72             }
 73             catch (Exception ex)
 74             {
 75                 ftp = GetRequest(URI, username, password);
 76                 ftp.Method = System.Net.WebRequestMethods.Ftp.DeleteFile; //删除
 77                 ftp.GetResponse();
 78                 throw ex;
 79             }
 80             finally
 81             {
 82                 //fileinfo.Delete();
 83             }
 84 
 85             // 可以记录一个日志  "上传" + fileinfo.FullName + "上传到" + "FTP://" + hostname + "/" + targetDir + "/" + fileinfo.Name + "成功." );
 86             ftp = null;
 87 
 88             #region
 89             /*****
 90              *FtpWebResponse
 91              * ****/
 92             //FtpWebResponse ftpWebResponse = (FtpWebResponse)ftp.GetResponse();
 93             #endregion
 94         }
 95 
 96         private static FtpWebRequest GetRequest(string URI, string username, string password)
 97         {
 98             //根据服务器信息FtpWebRequest创建类的对象
 99             FtpWebRequest result = (FtpWebRequest)FtpWebRequest.Create(URI);
100             //提供身份验证信息
101             result.Credentials = new System.Net.NetworkCredential(username, password);
102             //设置请求完成之后是否保持到FTP服务器的控制连接,默认值为true
103             result.KeepAlive = false;
104             return result;
105         }

 

转载于:https://www.cnblogs.com/mrqiang/p/4348709.html

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
用VS编写的FTP服务器软件,C#网络程序编程学习用。 代码: using System; using System.Collections.Generic; using System.Globalization; using System.IO; using System.Net; using System.Net.Sockets; using System.Threading; using System.Windows.Forms; namespace FtpServer { public partial class FtpServerForm : Form { TcpListener myTcpListener = null; private Thread listenThread; // 保存用户名和密码 Dictionary users; public FtpServerForm() { InitializeComponent(); // 初始化用户名和密码 users = new Dictionary(); users.Add("admin", "admin"); // 设置默认的主目录 tbxFtpRoot.Text = "F:/MyFtpServerRoot/"; IPAddress[] ips = Dns.GetHostAddresses(""); tbxFtpServerIp.Text = ips[5].ToString(); tbxFtpServerPort.Text = "21"; lstboxStatus.Enabled = false; } // 启动服务器 private void btnFtpServerStartStop_Click(object sender, EventArgs e) { if (myTcpListener == null) { listenThread = new Thread(ListenClientConnect); listenThread.IsBackground = true; listenThread.Start(); lstboxStatus.Enabled = true; lstboxStatus.Items.Clear(); lstboxStatus.Items.Add("已经启动Ftp服务..."); btnFtpServerStartStop.Text = "停止"; } else { myTcpListener.Stop(); myTcpListener = null; listenThread.Abort(); lstboxStatus.Items.Add("Ftp服务已停止!"); lstboxStatus.TopIndex = lstboxStatus.Items.Count - 1; btnFtpServerStartStop.Text = "启动"; } } // 监听端口,处理客户端连接 private void ListenClientConnect() { myTcpListener = new TcpListener(IPAddress.Parse(tbxFtpServerIp.Text), int.Parse(tbxFtpServerPort.Text)); // 开始监听传入的请求 myTcpListener.Start(); AddInfo("启动FTP服务成功!"); AddInfo("Ftp服务器运行中...[点击”停止“按钮停止FTP服务]"); while (true) { try { // 接收连接请求 TcpClient tcpClient = myTcpListener.AcceptTcpClient(); AddInfo(string.Format("客户端({0})与本机({1})建立Ftp连接", tcpClient.Client.RemoteEndPoint, myTcpListener.LocalEndpoint)); User user = new User(); user.commandSession = new UserSeesion(tcpClient); user.workDir = tbxFtpRoot.Text; Thread t = new Thread(UserProcessing); t.IsBackground = true; t.Start(user); } catch { break; } } } // 处理客户端用户请求 private void UserProcessing(object obj) { User user = (User)obj; string sendString = "220 FTP Server v1.0"; RepleyCommandToUser(user, sendString); while (true) { string receiveString = null; try { // 读取客户端发来的请求信息 receiveString = user.commandSession.streamReader.ReadLine(); } catch(Exception ex) { if (user.commandSession.tcpClient.Connected == false) { AddInfo(string.Format("客户端({0}断开连接!)", user.commandSession.tcpClient.Client.RemoteEndPoint)); } else { AddInfo("接收命令失败!" + ex.Message); } break; } if (receiveString == null) { AddInfo("接收字符串为null,结束线程!"); break; } AddInfo(string.Format("来自{0}:[{1}]", user.commandSession.tcpClient.Client.RemoteEndPoint, receiveString)); // 分解客户端发来的控制信息中的命令和参数 string command = receiveString; string param = string.Empty; int index = receiveString.IndexOf(' '); if (index != -1) { command = receiveString.Substring(0, index).ToUpper(); param = receiveString.Substring(command.Length).Trim(); } // 处理不需登录即可响应的命令(这里只处理QUIT) if (command == "QUIT") { // 关闭TCP连接并释放与其关联的所有资源 user.commandSession.Close(); return; } else { switch (user.loginOK) { // 等待用户输入用户名: case 0: CommandUser(user, command, param); break; // 等待用户输入密码 case 1: CommandPassword(user, command, param); break; // 用户名和密码验证正确后登陆 case 2: switch (command) { case "CWD": CommandCWD(user, param); break; case "PWD": CommandPWD(user); break; case "PASV": CommandPASV(user); break; case "PORT": CommandPORT(user, param); break; case "LIST": CommandLIST(user, param); break; case "NLIST": CommandLIST(user, param); break; // 处理下载文件命令 case "RETR": CommandRETR(user, param); break; // 处理上传文件命令 case "STOR": CommandSTOR(user, param); break; // 处理删除命令 case "DELE": CommandDELE(user, param); break; // 使用Type命令在ASCII和二进制模式进行变换 case "TYPE": CommandTYPE(user, param); break; default: sendString = "502 command is not implemented."; RepleyCommandToUser(user, sendString); break; } break; } } } } // 想客户端返回响应码 private void RepleyCommandToUser(User user, string str) { try { user.commandSession.streamWriter.WriteLine(str); AddInfo(string.Format("向客户端({0})发送[{1}]", user.commandSession.tcpClient.Client.RemoteEndPoint, str)); } catch { AddInfo(string.Format("向客户端({0})发送信息失败", user.commandSession.tcpClient.Client.RemoteEndPoint)); } } // 向屏幕输出显示状态信息(这里使用了委托机制) private delegate void AddInfoDelegate(string str); private void AddInfo(string str) { // 如果调用AddInfo()方法的线程与创建ListView控件的线程不在一个线程时 // 此时利用委托在创建ListView的线程上调用 if (lstboxStatus.InvokeRequired == true) { AddInfoDelegate d = new AddInfoDelegate(AddInfo); this.Invoke(d, str); } else { lstboxStatus.Items.Add(str); lstboxStatus.TopIndex = lstboxStatus.Items.Count - 1; lstboxStatus.ClearSelected(); } } #region 处理各个命令 #region 登录过程,即用户身份验证过程 // 处理USER命令,接收用户名但不进行验证 private void CommandUser(User user, string command, string param) { string sendString = string.Empty; if (command == "USER") { sendString = "331 USER command OK, password required."; user.userName = param; // 设置loginOk=1为了确保后面紧接的要求输入密码 // 1表示已接收到用户名,等到接收密码 user.loginOK = 1; } else { sendString = "501 USER command syntax error."; } RepleyCommandToUser(user, sendString); } // 处理PASS命令,验证用户名和密码 private void CommandPassword(User user, string command, string param) { string sendString = string.Empty; if (command == "PASS") { string password = null; if (users.TryGetValue(user.userName, out password)) { if (password == param) { sendString = "230 User logged in success"; // 2表示登录成功 user.loginOK = 2; } else { sendString = "530 Password incorrect."; } } else { sendString = "530 User name or password incorrect."; } } else { sendString = "501 PASS command Syntax error."; } RepleyCommandToUser(user, sendString); // 用户当前工作目录 user.currentDir = user.workDir; } #endregion #region 文件管理命令 // 处理CWD命令,改变工作目录 private void CommandCWD(User user, string temp) { string sendString = string.Empty; try { string dir = user.workDir.TrimEnd('/') + temp; // 是否为当前目录的子目录,且不包含父目录名称 if (Directory.Exists(dir)) { user.currentDir = dir; sendString = "250 Directory changed to '" + dir + "' successfully"; } else { sendString = "550 Directory '" + dir + "' does not exist"; } } catch { sendString = "502 Directory changed unsuccessfully"; } RepleyCommandToUser(user,sendString); } // 处理PWD命令,显示工作目录 private void CommandPWD(User user) { string sendString = string.Empty; sendString = "257 '" + user.currentDir + "' is the current directory"; RepleyCommandToUser(user, sendString); } // 处理LIST/NLIST命令,想客户端发送当前或指定目录下的所有文件名和子目录名 private void CommandLIST(User user, string parameter) { string sendString = string.Empty; DateTimeFormatInfo dateTimeFormat = new CultureInfo("en-US", true).DateTimeFormat; // 得到目录列表 string[] dir = Directory.GetDirectories(user.currentDir); if (string.IsNullOrEmpty(parameter) == false) { if (Directory.Exists(user.currentDir + parameter)) { dir = Directory.GetDirectories(user.currentDir + parameter); } else { string s = user.currentDir.TrimEnd('/'); user.currentDir = s.Substring(0, s.LastIndexOf("/") + 1); } } for (int i = 0; i < dir.Length; i++) { string folderName = Path.GetFileName(dir[i]); DirectoryInfo d = new DirectoryInfo(dir[i]); // 按下面的格式输出目录列表 sendString += @"dwr-\t" + Dns.GetHostName() + "\t" + dateTimeFormat.GetAbbreviatedMonthName(d.CreationTime.Month) + d.CreationTime.ToString(" dd yyyy") + "\t" + folderName + Environment.NewLine; } // 得到文件列表 string[] files = Directory.GetFiles(user.currentDir); if (string.IsNullOrEmpty(parameter) == false) { if (Directory.Exists(user.currentDir + parameter + "/")) { files = Directory.GetFiles(user.currentDir + parameter + "/"); } } for (int i = 0; i 1024的随机端口 // 下面这个运算算法只是为了得到一个大于1024的端口值 port = random1 << 8 | random2; try { user.dataListener = new TcpListener(localip, port); AddInfo("TCP 数据连接已打开(被动模式)--" + localip.ToString() + ":" + port); } catch { continue; } user.isPassive = true; string temp = localip.ToString().Replace('.', ','); // 必须把端口号IP地址告诉客户端,客户端接收到响应命令后, // 再通过新的端口连接服务器的端口P,然后进行文件数据传输 sendString = "227 Entering Passive Mode(" + temp + "," + random1 + "," + random2 + ")"; RepleyCommandToUser(user, sendString); user.dataListener.Start(); break; } } // 处理PORT命令,使用主动模式进行传输 private void CommandPORT(User user, string portstring) { // 主动模式时,客户端必须告知服务器接收数据的端口号,PORT 命令格式为:PORT address // address参数的格式为i1、i2、i3、i4、p1、p2,其中i1、i2、i3、i4表示IP地址 // 下面通过.字符串来组合这四个参数得到IP地址 // p1、p2表示端口号,下面通过int.Parse(temp[4]) << 8) | int.Parse(temp[5] // 这个算法来获得一个大于1024的端口来发送给服务器 string sendString = string.Empty; string[] temp = portstring.Split(','); string ipString = "" + temp[0] + "." + temp[1] + "." + temp[2] + "." + temp[3]; // 客户端发出PORT命令把客户端的IP地址和随机的端口告诉服务器 int portNum = (int.Parse(temp[4]) < 0) { user.dataSession.binaryWriter.Write(bytes, 0, count); user.dataSession.binaryWriter.Flush(); count = binaryReader.Read(bytes, 0, bytes.Length); } } else { StreamReader streamReader = new StreamReader(fs); while (streamReader.Peek() > -1) { user.dataSession.streamWriter.WriteLine(streamReader.ReadLine()); } } AddInfo("...]发送完毕!"); } finally { user.dataSession.Close(); fs.Close(); } } // 使用数据连接接收文件流(客户端发送上传文件功能) private void ReadFileByUserSession(User user, FileStream fs) { AddInfo("接收用户上传数据(文件流):[..."); try { if (user.isBinary) { byte[] bytes = new byte[1024]; BinaryWriter binaryWriter = new BinaryWriter(fs); int count = user.dataSession.binaryReader.Read(bytes, 0, bytes.Length); while (count > 0) { binaryWriter.Write(bytes, 0, count); binaryWriter.Flush(); count = user.dataSession.binaryReader.Read(bytes, 0, bytes.Length); } } else { StreamWriter streamWriter = new StreamWriter(fs); while (user.dataSession.streamReader.Peek() > -1) { streamWriter.Write(user.dataSession.streamReader.ReadLine()); streamWriter.Flush(); } } AddInfo("...]接收完毕"); } finally { user.dataSession.Close(); fs.Close(); } } private void label3_Click(object sender, EventArgs e) { } } }
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值