“在 Linux 操作系统中运行 ASP.NET 4 (中)”中已经配置好了 openSUSE 11.3 操作系统。
现在,我们进入“GNOME 终端”,使用 ifconfig 命令验证一下本虚拟的 IP 地址就是一开始我们在宽带路由器中为它分配的静态地址。
ben@linux-nyhn:~> /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:51:5B:0B
inet addr:192.168.1.251 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe51:5b0b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:853 errors:0 dropped:0 overruns:0 frame:0
TX packets:807 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:853227 (833.2 Kb) TX bytes:90376 (88.2 Kb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:22 errors:0 dropped:0 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1300 (1.2 Kb) TX bytes:1300 (1.2 Kb)
ben@linux-nyhn:~> sudo vim /etc/hosts
如上所示,再使用 vim 编辑器编辑 /etc/hosts 文件,增加一个域名 ben.skyiv.com,如下图所示:
注意上图中的 IP 地址必须是 127.0.0.1,而不能是 192.168.1.251。在宿主机的 Windows Vista 操作系统中以管理员身份进入命令提示符,使用记事本编辑 C:\Windows\System32\drivers\etc\hosts 文件,增加一个同样的域名 ben.skyiv.com,注意此时 IP 地址必须是 192.168.1.251,而不能是 127.0.0.1,如下图所示:
我们的 openSUSE 11.3 操作系统已经安装好了 apache 软件,但尚未启用,如下所示:
ben@linux-nyhn:~> sudo /sbin/service apache2 status
Checking for httpd2: unused
那么,现在,让我们设置 apache 为开机随系统启动,并且现在就启动它吧:
ben@linux-nyhn:~> sudo /sbin/chkconfig -add apache2 apache2 0:off 1:off 2:off 3:on 4:off 5:on 6:off ben@linux-nyhn:~> sudo /sbin/service apache2 start Starting httpd2 (prefork) done ben@linux-nyhn:~> sudo /sbin/service apache2 status Checking for httpd2: running
现在让我们在宿主机的 Windows Vista 操作系统的谷歌浏览器中打开 ben.skyiv.com 网站试试看吧:
如上图所示,我们的 Apache 2.2.15 已经正常工作在 Linux/SUSE 操作系统上了。只不过现在该网站还没有内容而已。
在 openSUSE 操作系统中,Apache 的默认文档是放在 /srv/www/htdocs 目录下的。
openSUSE 操作系统已经为每个用户建立了 public_html 目录,例如我的用户就是 /home/ben/public_html 目录,用以放置该用户的网站的内容。可以通过 ben.skyiv.com/~ben 访问,这里 ben 是我的用户名,如下图所示:
从上图中可以看出,这个目录是空的,需要用户自己放里放东东。那么,我们就编写如下一个 index.html 吧:
ben@linux-nyhn:~> cd public_html ben@linux-nyhn:~/public_html> vim index.html
再次在 Windows Vista 操作系统中访问 ben.skyiv.com/~ben 网页:
现在让我们来看看 mono 的版本:
ben@linux-nyhn:~> mono --version Mono JIT compiler version 2.6.4 (tarball Mon Jul 5 13:53:45 UTC 2010) Copyright (C) 2002-2010 Novell, Inc and Contributors. www.mono-project.com TLS: __thread GC: Included Boehm (with typed GC and Parallel Mark) SIGSEGV: altstack Notifications: epoll Architecture: amd64 Disabled: none ben@linux-nyhn:~> ben@linux-nyhn:~> gmcs --version Mono C# compiler version 2.6.4.0
这个 mono 2.6.4 的版本太低了。根据 mono 官方下载页面的指示,按如下步骤进行升级:
ben@linux-nyhn:~> sudo zypper addrepo http://ftp.novell.com/pub/mono/download-stable/openSUSE_11.3 mono-stable
正在添加安装源 'mono-stable' [done]
Repository 'mono-stable' successfully added
Enabled: Yes
Autorefresh: No
URI: http://ftp.novell.com/pub/mono/download-stable/openSUSE_11.3
ben@linux-nyhn:~> sudo zypper refresh --repo mono-stable
Retrieving repository 'mono-stable' metadata [done]
正在构建 'mono-stable' 安装源缓存 [done]
Specified repositories have been refreshed.
ben@linux-nyhn:~> zypper dist-upgrade --repo mono-stable
=================> 在这里进行漫长的升级 <=================
ben@linux-nyhn:~>
升级完成,再次查看 mono 的版本:
ben@linux-nyhn:~> mono --version Mono JIT compiler version 2.8.1 (tarball Fri Nov 12 14:37:21 UTC 2010) Copyright (C) 2002-2010 Novell, Inc and Contributors. www.mono-project.com TLS: __thread SIGSEGV: altstack Notifications: epoll Architecture: amd64 Disabled: none Misc: debugger softdebug LLVM: yes(2.8svn-mono) GC: Included Boehm (with typed GC and Parallel Mark) ben@linux-nyhn:~> dmcs --version Mono C# compiler version 2.8.1.0
果然已经升级到最新的 mono 2.8.1 版本了。
在 Apache mod_mono configuration tool 网页可以生成运行 ASP.NET 所需要的 Apache 软件的配置文件,如下图所示:
生成的 ben.skyiv.com.conf 文件如下所示:
<virtualhost *:80> ServerName ben.skyiv.com DocumentRoot /home/ben/www # MonoServerPath can be changed to specify which version of ASP.NET is hosted # mod-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0 # For SUSE Linux Enterprise Mono Extension, uncomment the line below: # MonoServerPath ben.skyiv.com "/opt/novell/mono/bin/mod-mono-server2" # For Mono on openSUSE, uncomment the line below instead: MonoServerPath ben.skyiv.com "/usr/bin/mod-mono-server2" # To obtain line numbers in stack traces you need to do two things: # 1) Enable Debug code generation in your page by using the Debug="true" # page directive, or by setting in the # application's Web.config # 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging MonoDebug ben.skyiv.com true # The MONO_IOMAP environment variable can be configured to provide platform abstraction # for file access in Linux. Valid values for MONO_IOMAP are: # case # drive # all # Uncomment the line below to alter file access behavior for the configured application MonoSetEnv ben.skyiv.com MONO_IOMAP=all # # Additional environtment variables can be set for this server instance using # the MonoSetEnv directive. MonoSetEnv takes a string of 'name=value' pairs # separated by semicolons. For instance, to enable platform abstraction *and* # use Mono's old regular expression interpreter (which is slower, but has a # shorter setup time), uncomment the line below instead: # MonoSetEnv ben.skyiv.com MONO_IOMAP=all;MONO_OLD_RX=1 MonoApplications ben.skyiv.com "/:/home/ben/www" <location "/"> Allow from all Order allow,deny MonoSetServerAlias ben.skyiv.com SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </location> <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </ifmodule> </virtualhost>
这个 ben.skyiv.com.conf 文件需要放在 /etc/apache2/conf.d 目录下:
ben@ben:~> ll /etc/apache2/conf.d
总计 8
-rw-r--r-- 1 ben users 2037 01-04 01:21 ben.skyiv.com.conf
-rw-r--r-- 1 root root 1239 10-01 02:12 mod_mono.conf
然后创建 /home/ben/www 目录,并重启 Apache 服务:
ben@ben:~> mkdir www ben@ben:~> sudo /etc/init.d/apache2 restart Syntax OK Shutting down httpd2 (waiting for all children to terminate) done Starting httpd2 (prefork) done ben@ben:~>
现在让我们建立一个网站:
ben@ben:~> cd www ben@ben:~/www> vim index.html
在 openSUSE 11.3 操作系统中访问 ben.skyiv.com 网站,如下图所示:
点击上图中的“服务器信息”,出现“The resource cannot be found”错误:
这是预料之中的,因为我们还没有编写 info.aspx 文件呢。从上图中可以看出,ASP.NET 是 2.0 版的。
现在,我们修改 /etc/apache2/conf.d/ben.skyiv.com.conf 文件,如下所示:
ben@ben:~/www> sudo vim /etc/apache2/conf.d/ben.skyiv.com.conf
如上图所示,将 mod-mono-server2 改为 mod-mono-server4 。然后重启 Apache 服务:
ben@ben:~> sudo /etc/init.d/apache2 restart Syntax OK Shutting down httpd2 (waiting for all children to terminate) done Starting httpd2 (prefork) done ben@ben:~>
然后重新访问 ben.skyiv.com/aspx/info.aspx 网页:
从上图中可以看出,已经运行在 ASP.NET 4 了。
现在,让我们来编写 info.aspx 程序吧:
ben@linux-nyhn:~/www> mkdir aspx src bin ben@linux-nyhn:~/www> vim aspx/info.aspx ben@linux-nyhn:~/www> vim src/info.aspx.cs ben@linux-nyhn:~/www> vim src/info.rsp
网页文件 aspx/info.aspx 的内容如下所示:
01: <%@ Page Language="C#" inherits="Skyiv.Ben.Web.InfoPage" %> 02: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> 03: <html xmlns="http://www.w3.org/1999/xhtml" > 04: <head runat="server"> 05: <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> 06: <title>服务器信息</title> 07: </head> 08: <body> 09: <form id="form1" runat="server"> 10: <a href="http://ben.skyiv.com">返回</a> 11: <hr /> 12: <asp:GridView id="dgMain" runat="Server" > 13: <AlternatingRowStyle BackColor="#FFFFCD" /> 14: <HeaderStyle BackColor="#AAAADD" /> 15: </asp:GridView> 16: </form> 17: </body> 18: </html>
对应的 C# 源程序 src/info.aspx.cs 的内容如下所示:
01: using System; 02: using System.Data; 03: using System.Web.UI; 04: using System.Web.UI.WebControls; 05: 06: namespace Skyiv.Ben.Web 07: { 08: public class InfoPage : Page 09: { 10: protected GridView dgMain; 11: 12: public void Page_Load(object sender, EventArgs e) 13: { 14: if (IsPostBack) return; 15: dgMain.DataSource = GetInfo(); 16: dgMain.DataBind(); 17: } 18: 19: DataTable GetInfo() 20: { 21: DataTable dt = new DataTable(); 22: dt.Columns.Add("项目", typeof(string)); 23: dt.Columns.Add("内容", typeof(string)); 24: AddRow(dt, "操作系统", Environment.OSVersion); 25: AddRow(dt, "公共语言运行库", Environment.Version); 26: return dt; 27: } 28: 29: void AddRow(DataTable dt, string name, object value) 30: { 31: DataRow dr = dt.NewRow(); 32: dr[0] = name; 33: dr[1] = value.ToString(); 34: dt.Rows.Add(dr); 35: } 36: } 37: }
编译响应文件 src/info.rsp 的内容如下所示:
-out:../bin/info.dll -t:library -r:System.Data -r:System.Web info.aspx.cs
然后就是使用以下命令进行编译了:
ben@linux-nyhn:~/www> cd src ben@linux-nyhn:~/www/src> dmcs @info.rsp
编译完成,网站的运行效果如下图所示:
至此,我们成功地在 Linux 操作系统中运行 ASP.NET 4。