小米路由器刷Xiaomi Mi WiFi Mini openwrt

Current Stable Release - OpenWrt 18.06.1， released on August, 18th 2018.

there is also  PandoraBox  firmware for Xiaomi Mini router.

步骤：

1，保证有外网

2，电脑连上lan口

http://en.miui.com/thread-64391-1-1.html

https://openwrt.org/toh/xiaomi/mini

The next few steps involve first loading the development version of the firmware, then loading a firmware version which provides SSH access with the last step being loading the OpenWRT firmware onto the router

小米路由器MINI(R1CM) can see this in web, MiWiFi 稳定版 2.22.9

开启小米路由器的SSH功能之后用户可以获得root权限

小结：

https://openwrt.org/toh/xiaomi/mini

u盘先格式成fat32，里面不要放任何文件

1， http://www1.miwifi.com/miwifi_download.html

下载开发固件升级 miwifi.bin ，因为稳定版不能刷ssh固件

1. 断开小米路由器的电源，将U盘插入USB接口；
2. 按住reset按钮之后重新接入电源，指示灯变为黄色闪烁状态即可松开reset键；
3. 等待3-5秒后安装完成之后，小米路由器会自动重启

U盘记得及时拔出来

2，再格式化下u盘，用app连上刷了开发固件的路由器， http://d.miwifi.com/rom/ssh （或者通过 http://www1.miwifi.com/miwifi_open.html的开启ssh工具 ） 下载ssh固件 miwifi_ssh.bin

4. 断开小米路由器的电源，将U盘插入USB接口；
5. 按住reset按钮之后重新接入电源，指示灯变为黄色闪烁状态即可松开reset键；
6. 等待3-5秒后安装完成之后，小米路由器会自动重启

wait a while

root@192.168.31.1

U盘记得及时拔出来

BusyBox v1.19.4 (2018-06-21 09:07:05 UTC) built-in shell (ash)

Enter 'help' for a list of built-in commands.

-----------------------------------------------------

Welcome to XiaoQiang!

-----------------------------------------------------

$$$$$$\ $$$$$$$\ $$$$$$$$\ $$\ $$\ $$$$$$\ $$\ $$\

$$ __$$\ $$ __$$\ $$ _____| $$ | $$ | $$ __$$\ $$ | $$ |

$$ / $$ |$$ | $$ |$$ | $$ | $$ | $$ / $$ |$$ |$$ /

$$$$$$$$ |$$$$$$$ |$$$$$\ $$ | $$ | $$ | $$ |$$$$$ /

$$ __$$ |$$ __$$< $$ __| $$ | $$ | $$ | $$ |$$ $$<

$$ | $$ |$$ | $$ |$$ | $$ | $$ | $$ | $$ |$$ |\$$\

$$ | $$ |$$ | $$ |$$$$$$$$\ $$$$$$$$$ | $$$$$$ |$$ | \$$\

\__| \__|\__| \__|\________| \_________/ \______/ \__| \__|

are u ok

uname -a

Linux XiaoQiang 2.6.36 #1 MiWiFi-R1CM-2.21.109 Thu Jun 21 09:31:24 UTC 2018 mips GNU/Linux

最后刷openwrt

• Get the latest firmware, eg: # cd /tmp; wget <link to firmware-image as shown above>

wget http://downloads.openwrt.org/releases/18.06.1/targets/ramips/mt7620/openwrt-18.06.1-ramips-mt7620-miwifi-mini-squashfs-sysupgrade.bin

• Check the MTD layout: # cat /proc/mtd
• If you find a line “OS1” go ahead with flashing: # mtd -r write <firmware-image you downloaded> OS1
• 
  

mtd -r write /tmp/openwrt-18.06.1-ramips-mt7620-miwifi-mini-squashfs-sysupgrade.bin OS1

Unlocking OS1 ...

Writing from /tmp/openwrt-18.06.1-ramips-mt7620-miwifi-mini-squashfs-sysupgrade.bin to OS1 ...

Rebooting ...

  After flashing is complete, the router will reboot . When finished you can login using telnet or web-interface on a LAN-connected client to host 192.168.1.1. User: root, no password.

SSH will be enabled after you set a password (using  passwd  or LuCI web interface), telnet will be disabled.

Please note that the OpenWrt binary defaults to the red color of the led instead of the orange/blue during and after finishing the boot.

如果ping 不通192.168.1.1等路由器一直红灯时再重启下即可