作为方便、快捷、功能强大的开发工具，Matlab有大量的第三方资源。在图像处理、计算机视觉方面，几年前的Matlab功能不如现在强大，所以在matahworks网站的File exchange（File exchange ）可以看到大量的个人上传的代码，但绝大多数综合性和运算性能不强。vlfeat的出现改变了这一现状，可以移步官网下载vlfeat ，最好下载编译过的bin文件，否则只下载源码的话需要自己编译。不过官方的编译不太完整，某些函数如果要在64的Windows10或Windows7下使用，需要自己编译，也可单独对某个函数使用mex命令编译，我使用Visual Studio 2010和Visual Studio 2015编译过。
vlfeat的功能很多，包含了多种特征提取（SIFT、DSIFT、QuickSIFT、PHOW、HOG、MSER、SLIC、Fisher、LBP）、局部特征匹配（UBC match）、分类（SVM、GMM）、聚类（IKM、HKM、AIB，Agglomerative Information Bottleneck）、检索（Random kd-tree）、分割、计算评价指标（true positives and false positives）、作图（Precision-recall curve、ROC curve）、生成分布函数（Second derivative of the Gaussian density function、Derivative of the Gaussian density function、Derivative of the sigmoid function、Standard Gaussian density function、Sigmoid function）、特征编码（VLAD）等功能，可参看帮助文章或演示程序。
注意，在运行演示程序前，要先运行toolbox目录下的vl_setup.m和vl_root.m，以添加必要的路径。
这里介绍一下Caltech101的分类演示程序phow_caltech101.m。
function phow_caltech101()
% PHOW_CALTECH101 Image classification in the Caltech-101 dataset
% This program demonstrates how to use VLFeat to construct an image
% classifier on the Caltech-101 data. The classifier uses PHOW
% features (dense SIFT), spatial histograms of visual words, and a
% Chi2 SVM. To speedup computation it uses VLFeat fast dense SIFT,
% kd-trees, and homogeneous kernel map. The program also
% demonstrates VLFeat PEGASOS SVM solver, although for this small
% dataset other solvers such as LIBLINEAR can be more efficient.
%
% Author: Andrea Vedaldi
% Copyright (C) 2011-2013 Andrea Vedaldi
% All rights reserved.
conf.calDir = 'data/caltech-101' ;
conf.dataDir = 'data/' ;
conf.autoDownloadData = true ;
conf.numTrain = 15 ;
conf.numTest = 15 ;
conf.numClasses = 102 ;
conf.numWords = 600 ;
conf.numSpatialX = [2 4] ;
conf.numSpatialY = [2 4] ;
conf.quantizer = 'kdtree' ;
conf.svm.C = 10 ;
conf.svm.solver = 'liblinear' ;
conf.svm.biasMultiplier = 1 ;
conf.phowOpts = {'Step', 3} ;
conf.clobber = false ;
conf.tinyProblem = true ;
conf.prefix = 'baseline' ;
conf.randSeed = 1 ;
%为加快速度，只处理5类数据，词典单词数为300
if conf.tinyProblem
conf.prefix = 'tiny' ;
conf.numClasses = 5 ;
conf.numSpatialX = 2 ;
conf.numSpatialY = 2 ;
conf.numWords = 300 ;
conf.phowOpts = {'Verbose', 2, 'Sizes', 7, 'Step', 5} ;
end
%设置词典、直方图、模型、运行结果、特征文件存储路径
conf.vocabPath = fullfile(conf.dataDir, [conf.prefix '-vocab.mat']) ;
conf.histPath = fullfile(conf.dataDir, [conf.prefix '-hists.mat']) ;
conf.modelPath = fullfile(conf.dataDir, [conf.prefix '-model.mat']) ;
conf.resultPath = fullfile(conf.dataDir, [conf.prefix '-result']) ;
conf.featPath = fullfile(conf.dataDir, [conf.prefix '-feat.mat']) ;
%设置随机数生成器
randn('state',conf.randSeed) ;
vl_twister('state',conf.randSeed) ;
%第一次运行需下载数据，如速度慢，可使用迅雷在该网址手动下载
if ~exist(conf.calDir, 'dir') || ...
(~exist(fullfile(conf.calDir, 'airplanes'),'dir') && ...
~exist(fullfile(conf.calDir, '101_ObjectCategories', 'airplanes')))
if ~conf.autoDownloadData
error(...
['Caltech-101 data not found. ' ...
'Set conf.autoDownloadData=true to download the required data.']) ;
end
vl_xmkdir(conf.calDir) ;
calUrl = ['http://www.vision.caltech.edu/Image_Datasets/' ...
'Caltech101/101_ObjectCategories.tar.gz'] ;
fprintf('Downloading Caltech-101 data to ''%s''. This will take a while.', conf.calDir) ;
untar(calUrl, conf.calDir) ;
end
%设置图像集路径
if ~exist(fullfile(conf.calDir, 'airplanes'),'dir')
conf.calDir = fullfile(conf.calDir, '101_ObjectCategories') ;
end
%获取类别信息，文件夹名字为类别名字
classes = dir(conf.calDir) ;
classes = classes([classes.isdir]) ;
classes = {classes(3:conf.numClasses+2).name} ;
images = {} ;
imageClass = {} ;
%遍历各图像集各类文件夹，获取图像名和类别名
for ci = 1:length(classes)
ims = dir(fullfile(conf.calDir, classes{ci}, '*.jpg'))' ; ims = vl_colsubset(ims, conf.numTrain + conf.numTest) ;
ims = cellfun(@(x)fullfile(classes{ci},x),{ims.name},'UniformOutput',false) ;
images = {images{:}, ims{:}} ;
imageClass{end+1} = ci * ones(1,length(ims)) ;
end
%建立训练集
selTrain = find(mod(0:length(images)-1, conf.numTrain+conf.numTest) < conf.numTrain) ;
%建立测试集
selTest = setdiff(1:length(images), selTrain) ;
imageClass = cat(2, imageClass{:}) ;
model.classes = classes ;
model.phowOpts = conf.phowOpts ;
model.numSpatialX = conf.numSpatialX ;
model.numSpatialY = conf.numSpatialY ;
model.quantizer = conf.quantizer ;
model.vocab = [] ;
model.w = [] ;
model.b = [] ;
model.classify = @classify ;
%提取图像PHOW特征并训练词典
if ~exist(conf.vocabPath) || conf.clobber
%取30幅图像进行训练
selTrainFeats = vl_colsubset(selTrain, 30) ;
descrs = {} ;
for ii = 1:length(selTrainFeats)
im = imread(fullfile(conf.calDir, images{selTrainFeats(ii)})) ;
%对图像进行标准化
im = standarizeImage(im) ;
%提取特征
[drop, descrs{ii}] = vl_phow(im, model.phowOpts{:}) ;
end
descrs = vl_colsubset(cat(2, descrs{:}), 10e4) ;
descrs = single(descrs) ;
save(conf.featPath, 'descrs') ;
% 对特征进行聚类生成词典
vocab = vl_kmeans(descrs, conf.numWords, 'verbose', 'algorithm', 'elkan', MaxNumIterations', 50) ; save(conf.vocabPath, 'vocab') ;
else
load(conf.vocabPath) ;
end
model.vocab = vocab ;
if strcmp(model.quantizer, 'kdtree')
%为词典建立kdtree索引
model.kdtree = vl_kdtreebuild(vocab) ;
end
%计算图像直方图
if ~exist(conf.histPath) || conf.clobber
hists = {} ;
parfor ii = 1:length(images)
fprintf('Processing %s (%.2f %%)\n', images{ii}, 100 * ii / length(images)) ;
im = imread(fullfile(conf.calDir, images{ii})) ;
hists{ii} = getImageDescriptor(model, im);
end
hists = cat(2, hists{:}) ;
save(conf.histPath, 'hists') ;
else
load(conf.histPath) ;
end
% 对直方图进行homker映射
psix = vl_homkermap(hists, 1, 'kchi2', 'gamma', .5) ;
% 训练词典
if ~exist(conf.modelPath) || conf.clobber
switch conf.svm.solver
case {'sgd', 'sdca'}
lambda = 1 / (conf.svm.C * length(selTrain)) ;
w = [] ;
parfor ci = 1:length(classes)
perm = randperm(length(selTrain)) ;
fprintf('Training model for class %s\n', classes{ci}) ;
y = 2 * (imageClass(selTrain) == ci) - 1 ;
[w(:,ci) b(ci) info] = vl_svmtrain(psix(:, selTrain(perm)), y(perm), lambda, ...
'Solver', conf.svm.solver,'MaxNumIterations', 50/lambda, ...
'BiasMultiplier', conf.svm.biasMultiplier, 'Epsilon', 1e-3);
end
case 'liblinear'
svm = train(imageClass(selTrain)',sparse(double(psix(:,selTrain))), ...
sprintf(' -s 3 -B %f -c %f', conf.svm.biasMultiplier, conf.svm.C),'col') ;
w = svm.w(:,1:end-1)' ;
b = svm.w(:,end)' ;
end
model.b = conf.svm.biasMultiplier * b ;
model.w = w ;
save(conf.modelPath, 'model') ;
else
load(conf.modelPath) ;
end
% 计算测试图像得分
scores = model.w' * psix + model.b' * ones(1,size(psix,2)) ;
[drop, imageEstClass] = max(scores, [], 1) ;
% 计算混淆矩阵
idx = sub2ind([length(classes), length(classes)], ...
imageClass(selTest), imageEstClass(selTest)) ;
confus = zeros(length(classes)) ;
confus = vl_binsum(confus, ones(size(idx)), idx) ;
% Plots
figure(1) ; clf;
subplot(1,2,1) ;
imagesc(scores(:,[selTrain selTest])) ; title('Scores') ;
set(gca, 'ytick', 1:length(classes), 'yticklabel', classes) ;
subplot(1,2,2) ;
imagesc(confus) ;
title(sprintf('Confusion matrix (%.2f %% accuracy)', ...
100 * mean(diag(confus)/conf.numTest) )) ;
print('-depsc2', [conf.resultPath '.ps']) ;
save([conf.resultPath '.mat'], 'confus', 'conf') ;
% -------------------------------------------------------------------------
function im = standarizeImage(im)
% -------------------------------------------------------------------------
im = im2single(im) ;
if size(im,1) > 480, im = imresize(im, [480 NaN]) ; end
% -------------------------------------------------------------------------
function hist = getImageDescriptor(model, im)
% -------------------------------------------------------------------------
im = standarizeImage(im) ;
width = size(im,2) ;
height = size(im,1) ;
numWords = size(model.vocab, 2) ;
[frames, descrs] = vl_phow(im, model.phowOpts{:}) ;
switch model.quantizer
case 'vq'
[drop, binsa] = min(vl_alldist(model.vocab, single(descrs)), [], 1) ;
case 'kdtree'
binsa = double(vl_kdtreequery(model.kdtree, model.vocab,single(descrs), 'MaxComparisons', 50)) ;
end
for i = 1:length(model.numSpatialX)
binsx = vl_binsearch(linspace(1,width,model.numSpatialX(i)+1), frames(1,:)) ;
binsy = vl_binsearch(linspace(1,height,model.numSpatialY(i)+1), frames(2,:)) ;
bins = sub2ind([model.numSpatialY(i), model.numSpatialX(i), numWords], binsy,binsx,binsa) ;
hist = zeros(model.numSpatialY(i) * model.numSpatialX(i) * numWords, 1) ;
hist = vl_binsum(hist, ones(size(bins)), bins) ;
hists{i} = single(hist / sum(hist)) ;
end
hist = cat(1,hists{:}) ;
hist = hist / sum(hist) ;
% -------------------------------------------------------------------------
function [className, score] = classify(model, im)
% -------------------------------------------------------------------------
hist = getImageDescriptor(model, im) ;
psix = vl_homkermap(hist, 1, 'kchi2', 'gamma', .5) ;
scores = model.w' * psix + model.b' ;
[score, best] = max(scores) ;
className = model.classes{best} ;Matlab版本的函数vlfeat可在该页查看，API函数 。简单列举如下：
vl_compile Compile VLFeat MEX files
vl_demo Run VLFeat demos
vl_harris Harris corner strength
vl_help VLFeat toolbox builtin help
vl_noprefix Create a prefix-less version of VLFeat commands
vl_root Obtain VLFeat root path
vl_setup Add VLFeat Toolbox to the path- AIB
vl_aib Agglomerative Information Bottleneck
vl_aibcut Cut VL_AIB tree
vl_aibcuthist Compute a histogram by using an AIB compressed alphabet
vl_aibcutpush Quantize based on VL_AIB cut
vl_aibhist Compute histogram over VL_AIB tree- FISHER
vl_fisher Fisher vector feature encoding- GEOMETRY
vl_hat Hat operator
vl_ihat Inverse vl_hat operator
vl_irodr Inverse Rodrigues' formula
vl_rodr Rodrigues' formula- GMM
vl_gmm Learn a Gaussian Mixture Model using EM- IMOP
vl_dwaffine Derivative of an affine warp
vl_imarray Flattens image array
vl_imarraysc Scale and flattens image array
vl_imdisttf Image distance transform
vl_imdown Downsample an image by two
vl_imgrad Image gradient
vl_imintegral Compute integral image
vl_impattern Generate an image from a stock pattern
vl_imreadbw Reads an image as gray-scale
vl_imreadgray Reads an image as gray-scale
vl_imsc Scale image
vl_imsmooth Smooth image
vl_imup Upsample an image by two
vl_imwbackward Image backward warping
vl_imwhiten Whiten an image
vl_rgb2xyz Convert RGB color space to XYZ
vl_tps Compute the thin-plate spline basis
vl_tpsu Compute the U matrix of a thin-plate spline transformation
vl_waffine Apply affine transformation to points
vl_witps Inverse thin-plate spline warping
vl_wtps Thin-plate spline warping
vl_xyz2lab Convert XYZ color space to LAB
vl_xyz2luv Convert XYZ color space to LUV
vl_xyz2rgb Convert XYZ to RGB- KMEANS
vl_hikmeans Hierachical integer K-means
vl_hikmeanshist Compute histogram of quantized data
vl_hikmeanspush Push data down an integer K-means tree
vl_ikmeans Integer K-means
vl_ikmeanshist Compute histogram of quantized data
vl_ikmeanspush Project data on integer K-means paritions
vl_kmeans Cluster data using k-means- MISC
vl_alldist2 Pairwise distances
vl_alphanum Sort strings using the Alphanum algorithm
vl_argparse Parse list of parameter-value pairs
vl_binsearch Maps data to bins
vl_binsum Binned summation
vl_colsubset Select a given number of columns
vl_cummax Cumulative maximum
vl_getpid Get MATLAB process ID
vl_grad Compute the gradient of an image
vl_histmarg Marginal of histogram
vl_hog Compute HOG features
vl_homkermap Homogeneous kernel map
vl_ihashfind Find labels in an integer hash table
vl_ihashsum Accumulate integer labels into a hash table
vl_inthist Calculate Integral Histogram
vl_isoctave Determines whether Octave is running
vl_kdtreebuild Build randomized kd-tree
vl_kdtreequery Query KD-tree
vl_lbp Local Binary Patterns
vl_lbpfliplr Flip LBP features left-right
vl_localmax Find local maximizers
vl_matlabversion Return MATLAB version as an integer
vl_numder Numerical derivative
vl_numder2 Numerical second derivative
vl_override Override structure subset
vl_pegasos [deprecated]
vl_sampleinthist Sample integral histogram
vl_simdctrl Toggle VLFeat SIMD optimizations
vl_svmdataset Construct advanced SVM dataset structure
vl_svmpegasos [deprecated]
vl_svmtrain Train a Support Vector Machine
vl_threads Control VLFeat computational threads
vl_twister Random number generator
vl_version Obtain VLFeat version information
vl_whistc Weighted histogram
vl_xmkdir Create a directory recursively.- MSER
vl_erfill Fill extremal region
vl_ertr Transpose exremal regions frames
vl_mser Maximally Stable Extremal Regions- PLOTOP
vl_cf Creates a copy of a figure
vl_click Click a point
vl_clickpoint Select a point by clicking
vl_clicksegment Select a segment by clicking
vl_det Compute DET curve
vl_figaspect Set figure aspect ratio
vl_linespec2prop Convert PLOT style line specs to line properties
vl_plotbox Plot boxes
vl_plotframe Plot a geometric frame
vl_plotgrid Plot a 2-D grid
vl_plotpoint Plot 2 or 3 dimensional points
vl_plotstyle Get a plot style
vl_pr Precision-recall curve.
vl_printsize Set the printing size of a figure
vl_roc ROC curve.
vl_tightsubplot Tiles axes without wasting space
vl_tpfp Compute true positives and false positives- QUICKSHIFT
vl_flatmap Flatten a tree, assigning the label of the root to each node
vl_imseg Color an image based on the segmentation
vl_quickseg Produce a quickshift segmentation of a grayscale or color image
vl_quickshift Quick shift image segmentation
vl_quickvis Create an edge image from a Quickshift segmentation.- SIFT
vl_covdet Covariant feature detectors and descriptors
vl_dsift Dense SIFT
vl_frame2oell Convert a geometric frame to an oriented ellipse
vl_liop Local Intensity Order Pattern descriptor
vl_phow Extract PHOW features
vl_plotsiftdescriptor Plot SIFT descriptor
vl_plotss Plot scale space
vl_sift Scale-Invariant Feature Transform
vl_siftdescriptor Raw SIFT descriptor
vl_ubcmatch Match SIFT features
vl_ubcread Read Lowe's SIFT implementation data files- SLIC
vl_slic SLIC superpixels- SPECIAL
vl_ddgaussian Second derivative of the Gaussian density function
vl_dgaussian Derivative of the Gaussian density function
vl_dsigmoid Derivative of the sigmoid function
vl_gaussian Standard Gaussian density function
vl_rcos RCOS function
vl_sigmoid Sigmoid function- VLAD
vl_vlad VLAD feature encoding
具体使用方法可运行演示程序。
转载于:https://blog.51cto.com/8764888/2053993
扫一扫
455
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
