-------------------------------------------V3.1.6-----------------------------------------------
在此简单的演示一下pppoe server的设置过程:
1.创建pppoe server
Interface—>interface选项卡—>“+”pppoe server—>OK
Interface—>interface选项卡—>“+”pppoe server—>OK
![](https://i-blog.csdnimg.cn/blog_migrate/78e9d04a391023c078d5a3c31e083c65.jpeg)
2.创建用户和限制
PPP:
a.Profile选项卡—>“+”—>ppp profile—>
General选项卡:
name:pppoe-profile
Remote Address:3.3.3.3
(此处的ip随便,但不能为空,下边还有DNS、
PPP:
a.Profile选项卡—>“+”—>ppp profile—>
General选项卡:
name:pppoe-profile
Remote Address:3.3.3.3
(此处的ip随便,但不能为空,下边还有DNS、
wins等选项,再次就不一一叙述了)
![](https://i-blog.csdnimg.cn/blog_migrate/f9d2938717c95d1ea9e70af908b549b3.jpeg)
b.PPPoE Server选项卡—>“+”
Interface:lan
Default Profile:pppoe-profile
勾选下边的"One Session Per Host"
(代表同一时间只能一个客户端登录使用)
![](https://i-blog.csdnimg.cn/blog_migrate/22e035bb8d92a8e4ee2e54821acfc18b.jpeg)
c.Secerts选项卡—>“+”
name:ppp
password:ppp
service:pppoe
caller ID:客户端绑定IP与MAC
profile:pppoe-profile
remote address:192.168.0.33
(此ip为客户端一台主机的固定ip)
profile:pppoe-profile
remote address:192.168.0.33
(此ip为客户端一台主机的固定ip)
![](https://i-blog.csdnimg.cn/blog_migrate/79dbcd507766d78eea4df8330e8106e7.jpeg)
------------------------------------------------OK--------------------------------------------------
以上是对PPPoE server 简单的设置过程,有什么不对的和不足之处请大家多多指点!
转载于:https://blog.51cto.com/dpeng33/281911