BGP/MPLS *** Option B 跨域研究实验

最新推荐文章于 2024-05-21 22:45:27 发布

weixin_34204057

最新推荐文章于 2024-05-21 22:45:27 发布

阅读量1k

点赞数

原文链接：http://blog.51cto.com/baoer0717/2088887

版权

1、实验环境
以华为模拟器eNSP为实验环境，结合wireshark抓包进行BGP/MPLS ××× OptionA 控制层面、数据层面以及日常排错三个方面进行研究；如下图所示：
BGP/MPLS *** Option B 跨域研究实验

2、配置流程
1）配置IGP与公网MPLS LDP隧道:
① ISP1
PE1：
router id 1.1.1.1
ospf 1
area 0.0.0.0
network 1.1.1.1 0.0.0.0
network 12.12.12.0 0.0.0.255
mpls lsr-id 1.1.1.1
mpls
mpls ldp
interface LoopBack0
ip address 1.1.1.1 255.255.255.255
mpls
mpls ldp
interface GigabitEthernet0/0/0
ip address 12.12.12.1 255.255.255.0
mpls
mpls ldp
P1：
router id 2.2.2.2
ospf 1
area 0.0.0.0
network 2.2.2.2 0.0.0.0
network 12.12.12.0 0.0.0.255
network 23.23.23.0 0.0.0.255
mpls lsr-id 2.2.2.2
mpls
mpls ldp
ip address 2.2.2.2 255.255.255.255
mpls
mpls ldp
interface GigabitEthernet0/0/0
ip address 12.12.12.2 255.255.255.0
mpls
mpls ldp
interface GigabitEthernet0/0/1
ip address 23.23.23.2 255.255.255.0
mpls
mpls ldp
ASBR1：
router id 3.3.3.3
ospf 1
area 0.0.0.0
network 3.3.3.3 0.0.0.0
network 23.23.23.0 0.0.0.255
mpls lsr-id 3.3.3.3
mpls
mpls ldp
ip address 3.3.3.3 255.255.255.255
mpls
mpls ldp
interface GigabitEthernet0/0/1
ip address 23.23.23.3 255.255.255.0
mpls
mpls ldp
查看公网路有：
<ASBR1>dis ip routing-table protocol ospf
Route Flags: R - relay, D - download to fib

Public routing table : OSPF
Destinations : 3 Routes : 3

OSPF routing table status : <Active>
Destinations : 3 Routes : 3

Destination/Mask Proto Pre Cost Flags NextHop Interface

    1.1.1.1/32  OSPF    10   2           D   23.23.23.2      GigabitEthernet

0/0/1
2.2.2.2/32 OSPF 10 1 D 23.23.23.2 GigabitEthernet
0/0/1
12.12.12.0/24 OSPF 10 2 D 23.23.23.2 GigabitEthernet
0/0/1

OSPF routing table status : <Inactive>
Destinations : 0 Routes : 0
查看MPLS LDP session:
<ASBR1>dis mpls ldp session

LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.

PeerID Status LAM SsnRole SsnAge KASent/Rcv

2.2.2.2:0 Operational DU Active 0000:00:18 75/75

TOTAL: 1 session(s) Found.
查看MPLS LSP：
<ASBR1>dis mpls lsp

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
1.1.1.1/32 NULL/1024 -/GE0/0/1
1.1.1.1/32 1024/1024 -/GE0/0/1
2.2.2.2/32 NULL/3 -/GE0/0/1
2.2.2.2/32 1025/3 -/GE0/0/1
3.3.3.3/32 3/NULL -/-
②ISP2
PE2：
router id 6.6.6.6
ospf 2
area 0.0.0.0
network 6.6.6.6 0.0.0.0
network 56.56.56.0 0.0.0.255
mpls lsr-id 6.6.6.6
mpls
mpls ldp
interface LoopBack0
ip address 6.6.6.6 255.255.255.255
mpls
mpls ldp
interface GigabitEthernet0/0/0
ip address 56.56.56.6 255.255.255.0
mpls
mpls ldp
P2：
router id 5.5.5.5
ospf 2
area 0.0.0.0
network 5.5.5.5 0.0.0.0
network 56.56.56.0 0.0.0.255
network 45.45.45.0 0.0.0.255
mpls lsr-id 5.5.5.5
mpls
mpls ldp
ip address 5.5.5.5 255.255.255.255
mpls
mpls ldp
interface GigabitEthernet0/0/0
ip address 56.56.56.5 255.255.255.0
mpls
mpls ldp
interface GigabitEthernet0/0/1
ip address 45.45.45.5 255.255.255.0
mpls
mpls ldp
ASBR2：
router id 4.4.4.4
ospf 2
area 0.0.0.0
network 4.4.4.4 0.0.0.0
network 45.45.45.0 0.0.0.255
mpls lsr-id 4.4.4.4
mpls
mpls ldp
ip address 4.4.4.4 255.255.255.255
mpls
mpls ldp
interface GigabitEthernet0/0/1
ip address 45.45.45.4 255.255.255.0
mpls
mpls ldp
查看公网路有：
<ASBR2>dis ip routing-table protocol ospf
Route Flags: R - relay, D - download to fib

Public routing table : OSPF
Destinations : 3 Routes : 3

OSPF routing table status : <Active>
Destinations : 3 Routes : 3

Destination/Mask Proto Pre Cost Flags NextHop Interface

    5.5.5.5/32  OSPF    10   1           D   45.45.45.5      GigabitEthernet

0/0/1
6.6.6.6/32 OSPF 10 2 D 45.45.45.5 GigabitEthernet
0/0/1
56.56.56.0/24 OSPF 10 2 D 45.45.45.5 GigabitEthernet
0/0/1

OSPF routing table status : <Inactive>
Destinations : 0 Routes : 0
查看MPLS LDP session:
<ASBR2>dis mpls ldp session

LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.

PeerID Status LAM SsnRole SsnAge KASent/Rcv

5.5.5.5:0 Operational DU Passive 0000:00:24 100/100

TOTAL: 1 session(s) Found.
查看MPLS LSP：
<ASBR2>dis mpls lsp

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 3/NULL -/-
5.5.5.5/32 NULL/3 -/GE0/0/1
5.5.5.5/32 1024/3 -/GE0/0/1
6.6.6.6/32 NULL/1025 -/GE0/0/1
6.6.6.6/32 1025/1025 -/GE0/0/1
2）配置各个站点CE与PE的×××实例:
①ISP1：
PE1：
ip ***-instance spi
ipv4-family
route-distinguisher 100:1
***-target 100:1 export-extcommunity
***-target 100:1 import-extcommunity
interface GigabitEthernet0/0/1
ip binding ***-instance spi
ip address 192.168.1.254 255.255.255.0
ip ***-instance spd
ipv4-family
route-distinguisher 200:1
***-target 200:1 export-extcommunity
***-target 200:1 import-extcommunity
interface GigabitEthernet0/0/2
ip binding ***-instance spd
ip address 10.10.1.254 255.255.255.0
ping测试站点到网关
②ISP2
PE2：
ip ***-instance spi
ipv4-family
route-distinguisher 100:1
***-target 100:1 export-extcommunity
***-target 100:1 import-extcommunity
interface GigabitEthernet0/0/1
ip binding ***-instance spi
ip address 192.168.2.254 255.255.255.0
ip ***-instance spd
ipv4-family
route-distinguisher 200:1
***-target 200:1 export-extcommunity
***-target 200:1 import-extcommunity
interface GigabitEthernet0/0/2
ip binding ***-instance spd
ip address 10.10.2.254 255.255.255.0
ping测试站点到网关
3）配置MP-BGP在PE与ASBR之间传递×××V4站点×××V4私网路由:
①ISP1
建立MP-BGP连接：
PE1：
bgp 100
undo default ipv4-unicast
peer 3.3.3.3 as-number 100
peer 3.3.3.3 connect-interface LoopBack0
ipv4-family unicast
undo synchronization
peer 3.3.3.3 enable
ipv4-family ***v4
policy ***-target
peer 3.3.3.3 enable
ASBR1：
bgp 100
undo default ipv4-unicast
peer 1.1.1.1 as-number 100
peer 1.1.1.1 connect-interface LoopBack0
ipv4-family unicast
undo synchronization
peer 1.1.1.1 enable
ipv4-family ***v4
policy ***-target
peer 1.1.1.1 enable
查看MP-BGP建立连接情况：
[ASBR1]dis bgp ***v4 all peer
BGP local router ID : 3.3.3.3
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ Up/Down State Pre
fRcv

1.1.1.1 4 100 9 9 0 00:07:51 Established 0
宣告×××路有到MP-BGP：
PE1：
ipv4-family ***-instance spd
network 10.10.1.0 255.255.255.0
ipv4-family ***-instance spi
network 192.168.1.0
查看***v4私网路由路有从PE1传递到ASBR1情况：
<ASBR1>dis bgp ***v4 all routing-table
BGP Local router ID is 3.3.3.3
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 2
Route Distinguisher: 100:1

  Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

*>i 192.168.1.0 1.1.1.1 0 100 0 i

Route Distinguisher: 200:1

  Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

*>i 10.10.1.0/24 1.1.1.1 0 100 0 i

×××-Instance spd, Router ID 3.3.3.3:

Total Number of Routes: 1
Network NextHop MED LocPrf PrefVal Path/Ogn

*>i 10.10.1.0/24 1.1.1.1 0 100 0 i

×××-Instance spi, Router ID 3.3.3.3:

Total Number of Routes: 1
Network NextHop MED LocPrf PrefVal Path/Ogn

*>i 192.168.1.0 1.1.1.1 0 100 0 i

①ISP2
建立MP-BGP连接：
PE2:
bgp 200
undo default ipv4-unicast
peer 4.4.4.4 as-number 200
peer 4.4.4.4 connect-interface LoopBack0
ipv4-family unicast
undo synchronization
peer 4.4.4.4 enable
ipv4-family ***v4
policy ***-target
peer 4.4.4.4 enable
ASBR2:
bgp 200
undo default ipv4-unicast
peer 6.6.6.6 as-number 200
peer 6.6.6.6 connect-interface LoopBack0
ipv4-family unicast
undo synchronization
peer 6.6.6.6 enable
ipv4-family ***v4
policy ***-target
peer 6.6.6.6 enable
<ASBR2>dis bgp ***v4 all peer
BGP local router ID : 4.4.4.4
Local AS number : 200
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ Up/Down State Pre
fRcv

6.6.6.6 4 200 3 3 0 00:01:55 Established 0
宣告×××路有到MP-BGP：
PE2
ipv4-family ***-instance spd
network 10.10.2.0 255.255.255.0
ipv4-family ***-instance spi
network 192.168.2.0
查看***v4私网路由路有从PE2传递到ASBR2情况：
<ASBR2>dis bgp ***v4 all routing-table
BGP Local router ID is 4.4.4.4
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete

Total number of routes from all PE: 2
Route Distinguisher: 100:1

  Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

*>i 192.168.2.0 6.6.6.6 0 100 0 i

Route Distinguisher: 200:1

  Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

*>i 10.10.2.0/24 6.6.6.6 0 100 0 i

×××-Instance spd, Router ID 4.4.4.4:

Total Number of Routes: 1
Network NextHop MED LocPrf PrefVal Path/Ogn

*>i 10.10.2.0/24 6.6.6.6 0 100 0 i

×××-Instance spi, Router ID 4.4.4.4:

Total Number of Routes: 1
Network NextHop MED LocPrf PrefVal Path/Ogn

*>i 192.168.2.0 6.6.6.6 0 100 0 i
4）进行ASBR1与ASBR2 的OPTION B跨域配置:
①ISP1
ASBR1:
interface GigabitEthernet0/0/0
ip address 34.34.34.3 255.255.255.0
Ping 测对端接口地址
②ISP2
ASBR2：
interface GigabitEthernet0/0/0
ip address 34.34.34.4 255.255.255.0
Ping 测对端接口地址
ASBR1与ASBR2建立MP-EBGP传递各自PE MP-IBGP传来的路由：
ASBR1：
bgp 100
undo default ipv4-unicast
peer 34.34.34.4 as-number 200
ipv4-family unicast
undo peer 34.34.34.4 enable
ipv4-family ***v4
policy ***-target
peer 34.34.34.4 enable
ASBR2：
bgp 200
undo default ipv4-unicast
peer 34.34.34.3 as-number 100
ipv4-family unicast
undo synchronization
undo peer 34.34.34.3 enable
ipv4-family ***v4
policy ***-target
peer 34.34.34.3 enable
配置完成后发现ASBR1与ASBR2收不到任何×××V4的路由，但是各自的PE1与PE2都已经发送×××V4路由如下图：
BGP/MPLS *** Option B 跨域研究实验

由于ASBR1与ASBR2上已经没有××× 实例，在控制层面MP-IBGP接收路由需要BGP的×××V4地址簇中对RT值进行过滤；所以在ASBR1与ASBR2上MP-BGP的×××V4地址簇中把policy ***-target undo掉。
BGP/MPLS *** Option B 跨域研究实验
但是发现PE1上接收不到ASBR1发送过来的192.168.2.0的路由如图：

排查发现ASBR1没有收到ASBR2上发来的路由：
BGP/MPLS *** Option B 跨域研究实验

在ASBR1上排查发现：
BGP/MPLS *** Option B 跨域研究实验
192.168.2.0/24的路由只有出去的标签，只有ASBR2给分发的标签，没有ASBR1分发的标签，所以它不转发给PE1；

注意：如果通过PE MP-BGP把私网路由传给ASBR或其它设备，如果该设备上没有起任何对应×××实例，该设备无法接收对应该实例×××V4路由，要想接收把***-target过滤关掉，如果采用Option B跨域注意两个ASBR互联接口使能MPLS，否则ASBR完不成标签交换不会把×××V4路由发出!
所以在ASBR1与ASBR2上使能MPLS，注意只需要使能MPLS，使得ASBR1 MP-IBGP与MP-EBGP能够交换标签，那么ASBR1会给发给PE1的192.168.2.0打上标签；
ASBR1：

BGP/MPLS *** Option B 跨域研究实验

PE1：
Destination: 192.168.2.0/24
Protocol: IBGP Process ID: 0
Preference: 255 Cost: 0
NextHop: 3.3.3.3 Neighbour: 3.3.3.3
State: Active Adv Relied Age: 00h03m24s
Tag: 0 Priority: low
Label: 1029 QoSInfo: 0x0
IndirectID: 0x4
RelayNextHop: 12.12.12.2 Interface: GigabitEthernet0/0/0
TunnelID: 0x3 Flags: RD

3、控制层面分析

1）CE3的路由192.168.2.0/24传递给CE1过程：
①PE2上连接CE3直连路由：
<PE2>dis ip routing-table ***-instance spi protocol direct
Route Flags: R - relay, D - download to fib

spi routing table : Direct
Destinations : 4 Routes : 4

Direct routing table status : <Active>
Destinations : 4 Routes : 4

Destination/Mask Proto Pre Cost Flags NextHop Interface

192.168.2.0/24  Direct  0    0           D   192.168.2.254   GigabitEthernet

0/0/1
192.168.2.254/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
192.168.2.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0

Direct routing table status : <Inactive>
Destinations : 0 Routes : 0
<PE2>dis ip routing-table ***-instance spi verbose
Destination: 192.168.2.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 192.168.2.254 Neighbour: 0.0.0.0
State: Active Adv Age: 03h29m00s
Tag: 0 Priority: high
Label: NULL QoSInfo: 0x0
IndirectID: 0x0
RelayNextHop: 0.0.0.0 Interface: GigabitEthernet0/0/1
TunnelID: 0x0 Flags: D

②把*** spi中192.168.2.0直连路由导入MP-BGP中：
<PE2>dis current-configuration configuration bgp
[V200R003C00]
bgp 200
undo default ipv4-unicast
peer 4.4.4.4 as-number 200
peer 4.4.4.4 connect-interface LoopBack0
ipv4-family unicast
undo synchronization
peer 4.4.4.4 enable
ipv4-family ***v4
policy ***-target
peer 4.4.4.4 enable
ipv4-family ***-instance spi
network 192.168.2.0
③PE2 在MP-BGP中192.168.2.0/24路由情况：
<PE2>dis bgp ***v4 ***-instance spi routing-table label

BGP Local router ID is 6.6.6.6
Status codes: - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 5
Route Distinguisher: 100:1
Network NextHop In/Out Label
> 192.168.2.0 192.168.2.254 1026/NULL
<PE2>dis bgp ***v4 ***-instance spi routing-table 192.168.2.0

BGP local router ID : 6.6.6.6
Local AS number : 200

×××-Instance spi, Router ID 6.6.6.6:
Paths: 1 available, 1 best, 1 select
BGP routing table entry information of 192.168.2.0/24:
Network route.
From: 0.0.0.0 (0.0.0.0)
Route Duration: 02h05m43s
Direct Out-interface: GigabitEthernet0/0/1
Original nexthop: 192.168.2.254
Qos information : 0x0
AS-path Nil, origin igp, MED 0, pref-val 0, valid, local, best, select, pre 0
Not advertised to any peer yet
PE2上的MP-BGP给192.168.2.0的×××v4路由分配的私网标签：
<PE2>dis bgp ***v4 all routing-table label

BGP Local router ID is 6.6.6.6
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete

Total number of routes from all PE: 4

Route Distinguisher: 100:1
Network NextHop In/Out Label

>i 192.168.1.0 4.4.4.4 NULL/1029
> 192.168.2.0 192.168.2.254 1026/NULL
④ASBR2 在MP-BGP中收到192.168.2.0/24路由情况：
ASBR2上收到PE2 MP-IBGP 192.168.2.0 的×××V4路由分的标签1026
ASBR 2上与ASBR1的 MP-EBGP给192.168.2.0 的×××V4路由分的1026
<ASBR2>dis bgp ***v4 all routing-table label

BGP Local router ID is 4.4.4.4
Status codes: - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 4
Route Distinguisher: 100:1
Network NextHop In/Out Label
> 192.168.1.0 34.34.34.3 1029/1027
*>i 192.168.2.0 6.6.6.6 1026/1026
ASBR2到6.6.6.6的公网MPLS标签：
<ASBR2>dis mpls lsp

             LSP Information: L3×××  LSP

FEC In/Out Label In/Out IF Vrf Name
192.168.2.0/24 1026/1026 -/- ASBR LSP
10.10.2.0/24 1027/1027 -/- ASBR LSP
10.10.1.0/24 1028/1026 -/- ASBR LSP
192.168.1.0/24 1029/1027 -/- ASBR LSP

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 3/NULL -/-
5.5.5.5/32 NULL/3 -/GE0/0/1
5.5.5.5/32 1024/3 -/GE0/0/1
6.6.6.6/32 NULL/1025 -/GE0/0/1
6.6.6.6/32 1025/1025 -/GE0/0/1
<P2>dis mpls lsp

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 NULL/3 -/GE0/0/1
4.4.4.4/32 1024/3 -/GE0/0/1
5.5.5.5/32 3/NULL -/-
6.6.6.6/32 NULL/3 -/GE0/0/0
6.6.6.6/32 1025/3 -/GE0/0/0
⑤ 在ASBR1上进行查收192.168.2.0/24路由情况:
ASBR 2上与ASBR1的 MP-EBGP给192.168.2.0 的×××V4路由分的1026
ASBR1上与PE1 的MP-IBGP给192.168.2.0 的×××V4路由分的标签1029
<ASBR1>dis bgp ***v4 all routing-table label

BGP Local router ID is 3.3.3.3
Status codes: - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 4
Route Distinguisher: 100:1
Network NextHop In/Out Label
>i 192.168.1.0 1.1.1.1 1027/1027
> 192.168.2.0 34.34.34.4 1029/1026
⑥ 在PE1上进行查收192.168.2.0/24路由情况:
<PE1>dis bgp ***v4 all routing-table label
ASBR1上与PE1 的MP-IBGP给192.168.2.0 的×××V4路由分的标签1029
BGP Local router ID is 1.1.1.1
Status codes: - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 4
Route Distinguisher: 100:1
Network NextHop In/Out Label
> 192.168.1.0 192.168.1.254 1027/NULL
>i 192.168.2.0 3.3.3.3 NULL/1029
PE1上到3.3.3.3的FIB表：
<PE1>dis fib 3.3.3.3
Route Entry Count: 1
Destination/Mask Nexthop Flag TimeStamp Interface TunnelID
3.3.3.3/32 12.12.12.2 DGHU t[99] GE0/0/0 0x3
PE1到3.3.3.3的公网标签：
<PE1>dis mpls lsp

             LSP Information: BGP  LSP

FEC In/Out Label In/Out IF Vrf Name
10.10.1.0/24 1026/NULL -/- spd
192.168.1.0/24 1027/NULL -/- spi

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
2.2.2.2/32 NULL/3 -/GE0/0/0
2.2.2.2/32 1024/3 -/GE0/0/0
1.1.1.1/32 3/NULL -/-
3.3.3.3/32 NULL/1025 -/GE0/0/0
3.3.3.3/32 1025/1025 -/GE0/0/0

4、数据层面分析
1）CE1到CE3的192.168.2.1数据转发分析：
① PC1 192.168.1.1 到网关PE1上的192.168.1.254；
② 在PE1上查询spi ***实例的路由表查到到192.168.2.0 下一跳为3.3.3.3;私网标签为1028；
③ 路由迭代，查找到路由如下：
<PE1>dis ip routing-table 3.3.3.3
Route Flags: R - relay, D - download to fib

Routing Table : Public
Summary Count : 1
Destination/Mask Proto Pre Cost Flags NextHop Interface
3.3.3.3/32 OSPF 10 2 D 12.12.12.2 GigabitEthernet0/0/0
<PE1>dis fib 3.3.3.3
Route Entry Count: 1
Destination/Mask Nexthop Flag TimeStamp Interface TunnelID
3.3.3.3/32 12.12.12.2 DGHU t[1597] GE0/0/0 0x3
④MPLS ldp 为 3.3.3.3/32路由分配的公网标签为1025：
<PE1>dis mpls lsp

             LSP Information: BGP  LSP

FEC In/Out Label In/Out IF Vrf Name
192.168.1.0/24 1026/NULL -/- spi
10.10.1.0/24 1027/NULL -/- spd

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
2.2.2.2/32 NULL/3 -/GE0/0/0
2.2.2.2/32 1024/3 -/GE0/0/0
1.1.1.1/32 3/NULL -/-
3.3.3.3/32 NULL/1025 -/GE0/0/0
3.3.3.3/32 1025/1025 -/GE0/0/0
⑤ 在PE1上进行查收192.168.2.0/24私网路由与标签情况:
<PE1>dis bgp ***v4 all routing-table label
ASBR1上与PE1 的MP-IBGP给192.168.2.0 的×××V4路由分的标签1029
BGP Local router ID is 1.1.1.1
Status codes: - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 4
Route Distinguisher: 100:1
Network NextHop In/Out Label
> 192.168.1.0 192.168.1.254 1027/NULL
*>i 192.168.2.0 3.3.3.3 NULL/1029

④ 去往192.168.2.1的数据包在PE1上G0/0/0封装如图所示 BGP/MPLS *** Option B 跨域研究实验 ;

PE1的G0/0/0上使能了MPLS，所以进行MPLS2.5层标签转发；
⑤ 在P1上查看标签路径：
<P1>dis fib 3.3.3.3
Route Entry Count: 1
Destination/Mask Nexthop Flag TimeStamp Interface TunnelID
3.3.3.3/32 23.23.23.3 DGHU t[1589] GE0/0/1 0x3
<P1>dis mpls lsp

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
2.2.2.2/32 3/NULL -/-
1.1.1.1/32 NULL/3 -/GE0/0/0
1.1.1.1/32 1024/3 -/GE0/0/0
3.3.3.3/32 NULL/3 -/GE0/0/1
3.3.3.3/32 1025/3 -/GE0/0/1
把公网标签1025换为3
发现一个3这个特殊标签，在离开P1时发生第二跳标签弹出，把3的标签也弹出；
在P1离开接口G0/0/1上抓包发现只留私网标签1029：
BGP/MPLS *** Option B 跨域研究实验
⑥ 在ASBR1上BGP路由中发现标签为：
ASBR2上收到ASBR2 MP-EBGP 192.168.2.0 的×××V4路由分的标签1026
ASBR1上与PE1 的MP-IBGP给192.168.2.0 的×××V4路由分的标签1029
<ASBR1>dis bgp ***v4 all routing-table label

BGP Local router ID is 3.3.3.3
Status codes: - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 4
Route Distinguisher: 100:1
Network NextHop In/Out Label
>i 192.168.1.0 1.1.1.1 1027/1027
*> 192.168.2.0 34.34.34.4 1029/1026
通过1029的标签发现哪个×××实例（MP-BGP分发的是私网标签，用于在PE上指导私网数据从BGP ×××V4的标签表剥离标签后转移至对应的vrf）；
⑦去往192.168.2.1报文进入spi VRF路由表并从G0/0/1上出去到ASBR2：
只剩下ASBR2与ASBR1分的MP-EBGP给192.168.2.0 的×××V4路由分的标签1026
BGP/MPLS *** Option B 跨域研究实验
⑧去往192.168.2.1报文进入ASBR2：
ASBR2上收到PE2 MP-IBGP 192.168.2.0 的×××V4路由分的标签1026
ASBR 2上与ASBR1的 MP-EBGP给192.168.2.0 的×××V4路由分的1026
<ASBR2>dis bgp ***v4 all routing-table label

BGP Local router ID is 4.4.4.4
Status codes: - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 4
Route Distinguisher: 100:1
Network NextHop In/Out Label
> 192.168.1.0 34.34.34.3 1029/1027
*>i 192.168.2.0 6.6.6.6 1026/1026
ASBR2到6.6.6.6的公网MPLS标签：
<ASBR2>dis mpls lsp

             LSP Information: L3×××  LSP

FEC In/Out Label In/Out IF Vrf Name
192.168.2.0/24 1026/1026 -/- ASBR LSP
10.10.2.0/24 1027/1027 -/- ASBR LSP
10.10.1.0/24 1028/1026 -/- ASBR LSP
192.168.1.0/24 1029/1027 -/- ASBR LSP

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 3/NULL -/-
5.5.5.5/32 NULL/3 -/GE0/0/1
5.5.5.5/32 1024/3 -/GE0/0/1
6.6.6.6/32 NULL/1025 -/GE0/0/1
6.6.6.6/32 1025/1025 -/GE0/0/1
<P2>dis mpls lsp

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 NULL/3 -/GE0/0/1
4.4.4.4/32 1024/3 -/GE0/0/1
5.5.5.5/32 3/NULL -/-
6.6.6.6/32 NULL/3 -/GE0/0/0
6.6.6.6/32 1025/3 -/GE0/0/0
⑨ 去往192.168.2.1的数据包在ASBR1上G0/0/1封装如图所示;

⑩ 在P2上查看标签路径：
<P2>dis fib 6.6.6.6
Route Entry Count: 1
Destination/Mask Nexthop Flag TimeStamp Interface TunnelID
6.6.6.6/32 56.56.56.6 DGHU t[1633] GE0/0/0 0x3
<P2>dis mpls lsp

             LSP Information: LDP LSP

FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 NULL/3 -/GE0/0/1
4.4.4.4/32 1024/3 -/GE0/0/1
5.5.5.5/32 3/NULL -/-
6.6.6.6/32 NULL/3 -/GE0/0/0
6.6.6.6/32 1025/3 -/GE0/0/0
把公网标签1025换为3
发现一个3这个特殊标签，在离开P2时发生第二跳标签弹出，把3的标签也弹出；
在P2离开接口G0/0/1上抓包发现只留私网标签1026：
BGP/MPLS *** Option B 跨域研究实验
11、去往192.168.2.1数据包进入PE2：
<PE2>dis bgp ***v4 all routing-table label

BGP Local router ID is 6.6.6.6
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete

Total number of routes from all PE: 5

Route Distinguisher: 100:1

    Network           NextHop           In/Out Label

>i 34.34.34.0 4.4.4.4 NULL/1027
>i 192.168.1.0 4.4.4.4 NULL/1028
*> 192.168.2.0 192.168.2.254 1026/NULL
通过1026的标签发现哪个×××实例（MP-BGP分发的是私网标签，用于在PE上指导私网数据从BGP ×××V4的标签表剥离标签后转移至对应的vrf）；
12、去往192.168.2.1报文进入spi VRF路由表：
<PE2>dis ip routing-table ***-instance spi verbose

Destination: 192.168.2.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 192.168.2.254 Neighbour: 0.0.0.0
State: Active Adv Age: 05h28m11s
Tag: 0 Priority: high
Label: NULL QoSInfo: 0x0
IndirectID: 0x0
RelayNextHop: 0.0.0.0 Interface: GigabitEthernet0/0/1
TunnelID: 0x0 Flags: D
13、通过路由表到PC3主机：
Ping的截图：
BGP/MPLS *** Option B 跨域研究实验

BGP/MPLS *** Option B 跨域研究实验

转载于:https://blog.51cto.com/baoer0717/2088887

weixin_34204057

关注

0
点赞
踩
2

收藏

觉得还不错? 一键收藏
0
评论
复制链接

分享到 QQ

分享到新浪微博

扫一扫

BGP/MPLS *** Option B 跨域研究实验

LDP Session(s) in Public NetworkCodes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)A '*' before a session means the session is being deleted.

PeerID Status LAM SsnRole SsnAge KASent/Rcv

2.2.2.2:0 Operational DU Active 0000:00:18 75/75

TOTAL: 1 session(s) Found.查看MPLS LSP：<ASBR1>dis mpls lsp

LDP Session(s) in Public NetworkCodes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)A '*' before a session means the session is being deleted.

PeerID Status LAM SsnRole SsnAge KASent/Rcv

5.5.5.5:0 Operational DU Passive 0000:00:24 100/100

TOTAL: 1 session(s) Found.查看MPLS LSP：<ASBR2>dis mpls lsp

1）CE3的路由192.168.2.0/24传递给CE1过程：①PE2上连接CE3直连路由：<PE2>dis ip routing-table ***-instance spi protocol direct Route Flags: R - relay, D - download to fib

FEC In/Out Label In/Out IF Vrf Name 192.168.2.0/24 1026/1026 -/- ASBR LSP 10.10.2.0/24 1027/1027 -/- ASBR LSP 10.10.1.0/24 1028/1026 -/- ASBR LSP 192.168.1.0/24 1029/1027 -/- ASBR LSP

FEC In/Out Label In/Out IF Vrf Name 4.4.4.4/32 3/NULL -/- 5.5.5.5/32 NULL/3 -/GE0/0/1 5.5.5.5/32 1024/3 -/GE0/0/1 6.6.6.6/32 NULL/1025 -/GE0/0/1 6.6.6.6/32 1025/1025 -/GE0/0/1 <P2>dis mpls lsp

FEC In/Out Label In/Out IF Vrf Name 10.10.1.0/24 1026/NULL -/- spd 192.168.1.0/24 1027/NULL -/- spi

FEC In/Out Label In/Out IF Vrf Name 192.168.1.0/24 1026/NULL -/- spi 10.10.1.0/24 1027/NULL -/- spd

PE1的G0/0/0上使能了MPLS，所以进行MPLS2.5层标签转发；⑤ 在P1上查看标签路径： <P1>dis fib 3.3.3.3Route Entry Count: 1Destination/Mask Nexthop Flag TimeStamp Interface TunnelID3.3.3.3/32 23.23.23.3 DGHU t[1589] GE0/0/1 0x3<P1>dis mpls lsp

FEC In/Out Label In/Out IF Vrf Name 192.168.2.0/24 1026/1026 -/- ASBR LSP 10.10.2.0/24 1027/1027 -/- ASBR LSP 10.10.1.0/24 1028/1026 -/- ASBR LSP 192.168.1.0/24 1029/1027 -/- ASBR LSP

FEC In/Out Label In/Out IF Vrf Name 4.4.4.4/32 3/NULL -/- 5.5.5.5/32 NULL/3 -/GE0/0/1 5.5.5.5/32 1024/3 -/GE0/0/1 6.6.6.6/32 NULL/1025 -/GE0/0/1 6.6.6.6/32 1025/1025 -/GE0/0/1 <P2>dis mpls lsp

LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.

TOTAL: 1 session(s) Found.
查看MPLS LSP：
<ASBR1>dis mpls lsp

LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.

TOTAL: 1 session(s) Found.
查看MPLS LSP：
<ASBR2>dis mpls lsp

1）CE3的路由192.168.2.0/24传递给CE1过程：
①PE2上连接CE3直连路由：
<PE2>dis ip routing-table ***-instance spi protocol direct
Route Flags: R - relay, D - download to fib

FEC In/Out Label In/Out IF Vrf Name
192.168.2.0/24 1026/1026 -/- ASBR LSP
10.10.2.0/24 1027/1027 -/- ASBR LSP
10.10.1.0/24 1028/1026 -/- ASBR LSP
192.168.1.0/24 1029/1027 -/- ASBR LSP

FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 3/NULL -/-
5.5.5.5/32 NULL/3 -/GE0/0/1
5.5.5.5/32 1024/3 -/GE0/0/1
6.6.6.6/32 NULL/1025 -/GE0/0/1
6.6.6.6/32 1025/1025 -/GE0/0/1
<P2>dis mpls lsp

FEC In/Out Label In/Out IF Vrf Name
10.10.1.0/24 1026/NULL -/- spd
192.168.1.0/24 1027/NULL -/- spi

FEC In/Out Label In/Out IF Vrf Name
192.168.1.0/24 1026/NULL -/- spi
10.10.1.0/24 1027/NULL -/- spd

PE1的G0/0/0上使能了MPLS，所以进行MPLS2.5层标签转发；
⑤ 在P1上查看标签路径：
<P1>dis fib 3.3.3.3
Route Entry Count: 1
Destination/Mask Nexthop Flag TimeStamp Interface TunnelID
3.3.3.3/32 23.23.23.3 DGHU t[1589] GE0/0/1 0x3
<P1>dis mpls lsp

FEC In/Out Label In/Out IF Vrf Name
192.168.2.0/24 1026/1026 -/- ASBR LSP
10.10.2.0/24 1027/1027 -/- ASBR LSP
10.10.1.0/24 1028/1026 -/- ASBR LSP
192.168.1.0/24 1029/1027 -/- ASBR LSP

FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 3/NULL -/-
5.5.5.5/32 NULL/3 -/GE0/0/1
5.5.5.5/32 1024/3 -/GE0/0/1
6.6.6.6/32 NULL/1025 -/GE0/0/1
6.6.6.6/32 1025/1025 -/GE0/0/1
<P2>dis mpls lsp