ASA/PIX 包过滤/NAT/路由查找的顺序 ZZ

====================
PIX/ASA - Inside (Higher Sec_Lev) to Outside (Lower SEC_Level)
---------------------------------------------------------------
Eg. Type - [Sub-Type] - Description
1. FLOW-LOOKUP - [] - Check for existing connections, if none found create a new connection.
2. ROUTE-LOOKUP - [input] - Initial Checking (Reverse Path Check, etc.)
3. ACCESS-LIST - [log] - ACL Lookup
4. CONN-SETTINGS - [] - class-map, policy-map, service-policy
5. IP-OPTIONS - [] -
6. NAT - [] - xlate
7. NAT - [host-limits] -
8. IP-OPTIONS - [] -
9. FLOW-CREATION - [] - If everything passes up until this point a connection is created.
10. ROUTE-LOOKUP - [output and adjacency] -
<!--[endif]-->

Much thanks to Joshua Walton for forwarding this info over to me - handy reference:

====================
Packet Flow Sequence
====================

PIX/ASA - Inside (Higher Sec_Lev) to Outside (Lower SEC_Level)
---------------------------------------------------------------
Eg. Type - [Sub-Type] - Description
1. FLOW-LOOKUP - [] - Check for existing connections, if none found create a new connection.
2. ROUTE-LOOKUP - [input] - Initial Checking (Reverse Path Check, etc.)
3. ACCESS-LIST - [log] - ACL Lookup
4. CONN-SETTINGS - [] - class-map, policy-map, service-policy
5. IP-OPTIONS - [] -
6. NAT - [] - xlate
7. NAT - [host-limits] -
8. IP-OPTIONS - [] -
9. FLOW-CREATION - [] - If everything passes up until this point a connection is created.
10. ROUTE-LOOKUP - [output and adjacency] -
<!--[endif]-->

PIX/ASA - *** - Inside (Higher Sec_Lev) to Outside (Lower SEC_Level)
---------------------------------------------------------------
Eg. Type - [Sub-Type] - Description
1. FLOW-LOOKUP - [] - Check for existing connections, if none found create a new connection.
2. ROUTE-LOOKUP - [input] - Initial Checking (Reverse Path Check, etc.)
3. ACCESS-LIST - [log] - ACL Lookup
4. CONN-SETTINGS - [] - class-map, policy-map, service-policy
5. IP-OPTIONS - [] -
6. NAT - [] - xlate
7. NAT - [host-limits] -
8. *** - [encrypt] -
9. *** - [ipsec-tunnel-flow] -
10. IP-OPTIONS - [] -
11. FLOW-CREATION - [] - If everything passes up until this point a connection is created.
12. FLOW-LOOKUP - [] - On the new header
13. ACCESS-LIST - [] - On the new header
14. FLOW-CREATION - [] -
15. ROUTE-LOOKUP - [output and adjacency] <?XML:NAMESPACE PREFIX = O />

ASA/PIX - Outside (Lower SEC_Level) to Inside (Higher Sec_Lev)
-----------------------------------------------------------
1. FLOW-LOOKUP - [] - Check for existing connections, if none found create a new connection.
2. UN-NAT - [static] -
2. ROUTE-LOOKUP - [input] - Initial Checking (Reverse Path Check, etc.)
3. ACCESS-LIST - [log] - ACL Lookup
4. CONN-SETTINGS - [] - class-map, policy-map, service-policy
5. IP-OPTIONS - [] -
6. NAT - [rpf-check] -
7. NAT - [host-limits] -
8. IP-OPTIONS - [] -
9. FLOW-CREATION - [] - If everything passes up until this point a connection is created.
10. ROUTE-LOOKUP - [output and adjacency] -