CAPI学习心得

比较有意义资料 Education .ppt User-guide Coherent Accelerator Interface Architecture.pdf  --------------------------------------- CAPI (coherent accelerator …) 首先是 accelerator，然后是coherent，区分于基于I/O的accelerator  ----------------------------------------- 看了CAPI 的education，写得详细，大致知道了流程， 遗留问题是WED的数据结构。。。。 1)     App Connect to accelerator-> Open Device ->PSL Reset AFU (通过control interface) |    AFU ready               if ((afu_handle = cxl_afu_open_dev(“/dev/cxl/afu0.0”)) < 0) {   1.1) See if there’s an FPGA available num_accel = accel_get_info(FPGA_ACCEL,ACCEL_COUNT_PHYSICAL_ACCEL,-1); 1.2) See if there are Slices available on the fpga num_Slices = accel_get_info(FPGA_ACCEL,ACCEL_COUNT_HWSLICES,-1); 1.3) Create fpga slice and download app_handle = create_and_open_dev(“/dev/capia1m”,”capi”,1); 2）  App set data structure (应该是WED list) 3）  App Start accelerator - >  Attach Device -> PSL_WED_Ax set to AddrX CNTL_Reg set(通过control interface) | AFU starts with WED location if ( cxl_afu_attach( afu_handle, myWED_ptr, -1, 0 ) < 0 ) {   注意此时把WED和AFU联系起来！ 4)     MMIO访问 5)     app访问problem state area afu_ps_area = mmap( NULL, SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, afu_fd, 0 ); 6)    干完后munmap( afu_ps_area, SIZE );            cxl_afu_free( afu_handle );  -------------------------------- PSL和AFU之间5个interface 其信号命名和interface有关 c: commande interface b: buffer interface r: response interface mm: MMIO interface j: control interface (job management)  --------------------------------- afu干活的流程  （注意PSL才是master，所有动作由其完成，这样便于coherent！！！） 1)     PSL 通过control interface写入WED 2)     AFU 通过accelerator command interface去invoke  PSL的service,带上tag标志（ 比如：Accelerator is using command code 0x0A60 – Read_cl_m to indicate the data should be cached in the PSL） 3)     PSL 去完成这个service，AFU是读，其实PSL就是写操作(from PSL to AFU)，通过accelerator buffer interface。对应AFU invoke的tag标志 4)     完成后，PSL通过PSL RESPONSE interface，告知AFU完成了这个AFU的invoke 的service

转载于:https://www.cnblogs.com/e-shannon/p/5738828.html