MCU多串口收发

最新推荐文章于 2024-11-04 08:01:23 发布

weixin_34258782

最新推荐文章于 2024-11-04 08:01:23 发布

阅读量518

点赞数

文章标签：嵌入式

原文链接：http://www.cnblogs.com/firstparke/p/8351424.html

版权

常用稳定，易操作的实现

static uint8_t    gString[200];       // 开的越大传的越慢
COM_PORT_INFO g_uart_struct[COM_PORT_NUM];

void COMx_Send(uint8_t data[],uint16_t len, COMM_PORT_TYPE chID)
{
    uint16_t i;
    UART_HandleTypeDef  UsartCom;

     switch(chID)
        {
        case GPS_UART_INDEX:
            UsartCom = huart4;
            break;    
        case TTL_UART_INDEX:
            UsartCom = huart3;
            break;
        case BLE_UART_INDEX:
            UsartCom = huart1;
            break;
        default:
            return;
        }

    for(i=0;i<len;i++)
    {
        while((__HAL_UART_GET_FLAG((&UsartCom), UART_FLAG_TXE) ? SET : RESET) == RESET);
        (&UsartCom)->Instance->DR = data[i];
    }
}


void COMx_Revd(COMM_PORT_TYPE chID)
{
    uint16_t timeout;
    uint16_t max_len;
    UART_HandleTypeDef  UsartCom;

    if (chID == GPS_UART_INDEX)
    {
        UsartCom = huart4;
        timeout = GPS_RX_FRAME_TIMEOUT;
        max_len = USART_GPS_MAX_Rx_BUF_LEN;
    }
    else if(chID == TTL_UART_INDEX)
    {
        UsartCom = huart3;
        timeout = TTL_RX_FRAME_TIMEOUT; 
        max_len = USART_TTL_MAX_Rx_BUF_LEN;
    }
    else if(chID == BLE_UART_INDEX)
    {
        UsartCom = huart1;
        timeout = BLE_RX_FRAME_TIMEOUT;     
        max_len = USART_BLE_MAX_Rx_BUF_LEN;
    }

    if(__HAL_UART_GET_FLAG((&UsartCom), USART_SR_RXNE) != RESET)
    {
        if(g_uart_struct[chID].Rx_counter >= max_len)
        {
            g_uart_struct[chID].Rx_counter--;
        }
        g_uart_struct[chID].RecvDataBuff[g_uart_struct[chID].Rx_counter++] = READ_REG((&UsartCom)->Instance->DR);
        g_uart_struct[chID].Rx_timeout = timeout;
    }
    __HAL_UART_CLEAR_FLAG((&UsartCom), USART_SR_PE|USART_SR_FE|USART_SR_NE|USART_SR_ORE);
}

void CommProc_uart(void)
{
    uint8_t i;
    uint8_t *data_buf;
    uint16_t data_len;
    
    for(i=GPS_UART_INDEX;i<=BLE_UART_INDEX;i++)
    {
        if((i == TTL_UART_INDEX) && (g_uart_struct[i].RxDoneFlag))
        {
            g_uart_struct[i].RxDoneFlag = false;
            data_len = g_uart_struct[i].Rx_counter;
            data_buf = g_uart_struct[i].RecvDataBuff;
            /* user add */
            memset(&g_uart_struct[i].RecvDataBuff,0,data_len);
            g_uart_struct[i].Rx_counter = 0;
        }
    }
}


void CheckUartRxDone(void)
{
    static uint32_t sys_tick_pre_val=0;
    static uint32_t sys_tick_cur_val=0;
    uint32_t i,past_ms_val;
    sys_tick_cur_val = HAL_GetTick();
    past_ms_val = sys_tick_cur_val-sys_tick_pre_val;
    for(i=GPS_UART_INDEX;i<=BLE_UART_INDEX;i++)
    {
        if(g_uart_struct[i].Rx_timeout > 0)
        {
            if(g_uart_struct[i].Rx_timeout >= past_ms_val)
            {
                g_uart_struct[i].Rx_timeout -= past_ms_val;
            }
            else
            {
                g_uart_struct[i].Rx_timeout = 0;
            }
            
            if(g_uart_struct[i].Rx_timeout == 0)
            {
                g_uart_struct[i].RxDoneFlag = true;
            }
        }
    }
    sys_tick_pre_val = sys_tick_cur_val;
}

void LocalPrintf(const char *fmt,...)
{    
    va_list ap;     
    memset(gString, 0, sizeof(gString));   
    va_start(ap,fmt);     
    vsprintf((char*)gString,fmt,ap);
    COMx_Send(gString, sizeof(gString), TTL_UART_INDEX);
    va_end(ap);
}

    #define     USART_GPS_MAX_Rx_BUF_LEN           ((uint16_t)512)
    #define     GPS_RX_FRAME_TIMEOUT               ((uint16_t)50)

    #define     USART_TTL_MAX_Rx_BUF_LEN           ((uint16_t)512)
    #define     TTL_RX_FRAME_TIMEOUT               ((uint16_t)50)

    #define     USART_BLE_MAX_Rx_BUF_LEN           ((uint16_t)512)
    #define     BLE_RX_FRAME_TIMEOUT               ((uint16_t)150)///帧超时时间


    #define COM_PORT_NUM                    ((uint8_t)3)    

    typedef struct
    {
        uint16_t Rx_counter;
        uint16_t Rx_timeout;       //ms
        bool     RxDoneFlag;       //断包标志
        uint8_t  RecvDataBuff[1000];       //包缓存
    }COM_PORT_INFO;
    
    typedef enum
    {
        GPS_UART_INDEX = 0,                 /* GPS口 */
        TTL_UART_INDEX,                     /* 维护口*/
        BLE_UART_INDEX,                     /* 蓝牙口 */
    }COMM_PORT_TYPE;                        /* 端口类型 */

    extern COM_PORT_INFO g_uart_struct[COM_PORT_NUM];


    void COMx_Revd(COMM_PORT_TYPE chID);
    void COMx_Send(uint8_t data[],uint16_t len, COMM_PORT_TYPE chID);
    void CommProc_uart(void);
    void CheckUartRxDone(void);
    void LocalPrintf(const char *fmt,...);