centos系统下设置固定IP+dns

笔者用的linux系统是centos版本的，在次之前linux是空白，今天我在物理机用XSHELL连接虚拟机中的centos时候出现连接失败的情况，我的第一反应就是IP是不是变了？打开虚拟机之后在终端中输入ifconfig还真是变了，我就想着把IP绑定在虚拟机中的网卡中，方便以后连接不再修改IP，图个方便，下面是步骤：

在终端中输入： vi /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE="eth0"

BOOTPROTO="dhcp"

HWADDR="00:0C:29:E1:F2:DF"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="17b80e4d-b7f0-4e7d-8887-fe579b8ec03a"

把BOOTPROTO=“dhcp”修改为static或者none，

然后添加IP地址

IPADDR=192.168.10.111（IP地址视自己的而定，我用的是我的）

添加掩码：

NETMASK=255.255.255.0

添加网关:

GATEWAY=192.168.10.1

修改后为：

DEVICE="eth0"
BOOTPROTO="none"
IPADDR=192.168.10.111
NETMASK=255.255.255.0
GATEWAY=192.168.10.1
HWADDR="00:0C:29:E1:F2:DF"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="17b80e4d-b7f0-4e7d-8887-fe579b8ec03a"

然后：wq保存

重启网卡：service network restart

[root@localhost ~]# service network restart
Shutting down interface eth0: Device state: 3 (disconnected)
[ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
state: activated
Connection activated
[ OK ]

 

 

好，现在就绑定好了

[root@localhost ~]# ping www.baidu.com

但是PING不通ip，那就设置下DNS

在终端中输入： [root@localhost ~]# vim /etc/resolv.conf

 

 

# Generated by NetworkManager

# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:

nameserver 202.98.128.86
nameserver 202.96.128.166

 

这是固定格式，

现在再ping百度试试

[root@localhost ~]# ping www.baidu.com
PING www.a.shifen.com (180.97.33.108) 56(84) bytes of data.
64 bytes from 180.97.33.108: icmp_seq=1 ttl=54 time=29.1 ms
64 bytes from 180.97.33.108: icmp_seq=2 ttl=54 time=28.6 ms

现在就ping通了

 

转载于:https://www.cnblogs.com/itor/p/4514143.html