监测硬件有没有被正确识别以及监控


首先是CPU型号线程数和主频

可以直接查看cpuinfo文件

cat /proc/cpuinfo

由于比较多所以过滤处理一下

cat /proc/cpuinfo|grep name|awk -F ':' '{print$2}'|uniq -c
      2  Intel(R) Atom(TM) CPU D425   @ 1.80GHz

可以看到主频 型号和线程数


内存

同理可产看meminfo文件 只看总量和可用的话只需要取前两行

cat /proc/meminfo |head -2
MemTotal:        1912344 kB
MemFree:         1804808 kB

或者直接 free -m

free -m
             total       used       free     shared    buffers     cached
Mem:          1867        102       1765          0          6         28
-/+ buffers/cache:         67       1800
Swap:         1999          0       1999

这里也可以看到交换的使用情况


物理硬盘 

可以使用 fdisk -l

fdisk -l

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xbf4fbf4f

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          26      204800   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              26         281     2048000   82  Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/sda3             281        9730    75896832   83  Linux

可以看到硬盘和分区信息


显卡

显卡的话其实不重要了不过可以用lspci看到

lspci | grep "VGA"
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller

同理这个命令可以看到主板设备和pci pcie设备 包括网卡声卡储存控制器等等

lspci 
00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 02)


最后温度的话可以使用lm_sensors查看

首先安装

yum install lm_sensors -y

然后第一次运行要先检测主板的传感器

sensors-detect

一路yes就行了 检测完之后会自动配置

之后执行sensors命令就能查看温度电压以及风扇转速信息了

sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +51.0°C  (crit = +100.0°C)                  

it8712-isa-0a10
Adapter: ISA adapter
in0:         +1.02 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in1:         +1.63 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in2:         +3.34 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in3:         +2.90 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in4:         +3.01 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in5:         +1.49 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in6:         +1.04 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in7:         +2.91 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
Vbat:        +3.17 V
fan1:          0 RPM  (min =    0 RPM)
fan2:          0 RPM  (min =    0 RPM)
fan3:          0 RPM  (min =    0 RPM)
temp1:       +26.0°C  (low  =  -1.0°C, high = +127.0°C)  ALARM  sensor = thermal diode
temp2:      -128.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = disabled
temp3:      +116.0°C  (low  =  -1.0°C, high = +127.0°C)  ALARM  sensor = thermal diode
cpu0_vid:   +2.050 V