话不多说，直接进入主题，步骤在附件里，直接复制粘贴就ok。


在此附上esxi自动化脚本

# Accept the VMware End User License Agreement 


vmaccepteula


# Set the root password for the DCUI and Tech Support Mode 


rootpw password


# Choose the first discovered disk to install onto 


install --firstdisk --overwritevmfs

#autopart --firstdisk --overwritevmfs


# The installation media is in the CD-ROM drive 


#network --bootproto=dhcp --device=vmnic0

#

reboot



$SNIPPET('network_config_esxi')


%pre --interpreter=busybox


$SNIPPET('kickstart_start')

$SNIPPET('pre_install_network_config')


%post --interpreter=busybox


%firstboot --interpreter=busybox


# Set the root password for the DCUI and Tech Support Mode 

SN=`esxcli hardware platform get | grep "Serial Number" | awk -F ":" '{print $NF}' | sed 's/ //g'`

NAME=`esxcli hardware platform get | grep "Product Name" | awk -F ":" '{print $NF}'`            

wget -q -P /opt http://172.21.200.200/config/esxserver

IPADDR=`cat /opt/esxserver | grep $SN | awk -F "," '{print $1}'`                               

GATEWAY=`cat /opt/esxserver | grep $SN | awk -F "," '{print $2}'`                               

###network config####

esxcli network ip set --ipv6-enabled false

esxcli network vswitch standard uplink add --uplink-name=vmnic1 --vswitch-name=vSwitch0           

# Add vMotion Portgroup to vSwitch0, assign it VLAN ID 5 and create a VMkernel interface          

esxcli network vswitch standard portgroup add --portgroup-name=vMotion --vswitch-name=vSwitch0 

esxcli network vswitch standard portgroup set --portgroup-name=vMotion --vlan-id=2060             

esxcli network vswitch standard portgroup set --portgroup-name="Management Network" --vlan-id=2060             

esxcli network ip interface add --interface-name=vmk0 --portgroup-name=vMotion                    

#esxcfg-vswitch --vlan=2060 --pg="Management Network" vSwitch0                                    

esxcli network ip interface ipv4 set --interface-name=vmk0 --ipv4=$IPADDR --netmask=255.255.255.0 --type=static

esxcli network ip route ipv4 add --gateway=192.168.1.254  --network=default                      

rm -fr /opt/esxserver

# Enable vMotion on the newly created VMkernel vmk1                                               

vim-cmd hostsvc/vmotion/vnic_set vmk0                                                             

# Set DNS and hostname

esxcli network ip dns search add --domain=localdomain                                             

esxcli network ip dns server add --server=202.106.196.115                                         

esxcli network ip dns server add --server=8.8.8.8                                                 

# Set the default PSP for EMC V-MAX to Round Robin as that is our preferred load balancing mechan 

esxcli storage nmp satp set --default-psp VMW_PSP_RR --satp VMW_SATP_SYMM                         

# Disable Netq # 

esxcfg-module -s force_netq=0,0,0,0 tg3

esxcfg-advcfg -k FALSE netNetqueueEnabled                                                         

# Enable SSH and the ESXi Shell

vim-cmd hostsvc/enable_ssh

vim-cmd hostsvc/start_ssh

vim-cmd hostsvc/enable_esx_shell                                       vim-cmd hostsvc/start_esx_shell


$SNIPPET('kickstart_done')