wKioL1neILLC88nZAAJR0IYlVoY777.png-wh_50

2911  添加   hwic-8a 模块  octal 线缆连接 2911  async 0/0/0 与1841   router0 console


octal 线缆连接 2911  async 0/1/0 与 1841 router3   console



2911配置：


program load complete, entry point: 0x80803000, size: 0x1b340

program load complete, entry point: 0x80803000, size: 0x1b340


IOS Image Load Test

___________________

Digitally Signed Release Software

program load complete, entry point: 0x81000000, size: 0x3bcd3d8

Self decompressing the p_w_picpath :

########################################################################## [OK]

Smart Init is enabled

smart init is sizing iomem

                  TYPE      MEMORY_REQ

           HWIC Slot 0      0x00200000     Onboard devices &

          buffer pools      0x022F6000

-----------------------------------------------

                TOTAL:      0x02AF6000

Rounded IOMEM up to: 45Mb.

Using 6 percent iomem. [45Mb/512Mb]


              Restricted Rights Legend


Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.


           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706


Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 04:52 by pt_team

Image text-base: 0x2100F918, data-base: 0x24729040


This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.


A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


If you require further assistance please contact us by sending email to

export@cisco.com.


Cisco CISCO2911/K9 (revision 1.0) with 491520K/32768K bytes of memory.

Processor board ID FTX152400KS

3 Gigabit Ethernet interfaces

DRAM configuration is 64 bits wide with parity disabled.

255K bytes of non-volatile configuration memory.

249856K bytes of ATA System CompactFlash 0 (Read/Write)



         --- System Configuration Dialog ---


Continue with configuration dialog? [yes/no]: no



Press RETURN to get started!




Router>

Router>enable

Router#

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#no ip domain-lookup

Router(config)#host server

server(config)#no ip routing

server(config)#line vty 0?

<0-15>  

server(config)#line vty 0 15

server(config-line)#no login

server(config-line)#no exec-timeout 

server(config-line)#logging synchronous 

server(config-line)#exit

server(config)#

server(config)#

server(config)#enable secret 888888

server(config)#int g 0/0

server(config-if)#ip add 192.168.1.1 255.255.255.0

server(config-if)#

server(config-if)#no shutdown


%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up


server(config-if)#exit

server(config)#int loopback 0


%LINK-5-CHANGED: Interface Loopback0, changed state to up


%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up



server(config-if)#ip add 1.1.1.1 255.255.255.255


server(config-if)#no shutdown

server(config-if)#

server(config-if)#exit

server(config)#

server(config)#exit

server#

%SYS-5-CONFIG_I: Configured from console by console


server#

server#show line

   Tty Line Typ     Tx/Rx    A Roty AccO AccI   Uses   Noise  Overruns   Int

*    0    0 CTY              -    -    -    -      0       0     0/0       -

     1    1 AUX   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/0    3 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/1    4 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/2    5 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/3    6 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/4    7 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/5    8 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/6    9 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/7   10 TTY   9600/9600  -    -    -    -      0       0     0/0       -

   388  388 VTY              -    -    -    -      0       0     0/0       -

   389  389 VTY              -    -    -    -      0       0     0/0       -

   390  390 VTY              -    -    -    -      0       0     0/0       -

   391  391 VTY              -    -    -    -      0       0     0/0       -

   392  392 VTY              -    -    -    -      0       0     0/0       -

   393  393 VTY              -    -    -    -      0       0     0/0       -

   394  394 VTY              -    -    -    -      0       0     0/0       -

   395  395 VTY              -    -    -    -      0       0     0/0       -

   396  396 VTY              -    -    -    -      0       0     0/0       -

   397  397 VTY              -    -    -    -      0       0     0/0       -

   398  398 VTY              -    -    -    -      0       0     0/0       -

   399  399 VTY              -    -    -    -      0       0     0/0       -

   400  400 VTY              -    -    -    -      0       0     0/0       -

   401  401 VTY              -    -    -    -      0       0     0/0       -

   402  402 VTY              -    -    -    -      0       0     0/0       -

   403  403 VTY              -    -    -    -      0       0     0/0       -

Line(s) not in async mode -or- with no hardware support:

11-387


server#line tty 3 10

            ^

% Invalid input detected at '^' marker.

server#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

server(config)#line tty 3 10

server(config-line)#no e

server(config-line)#no exec-timeout 

server(config-line)#logg sy

server(config-line)#logg synchronous 

server(config-line)#no login

server(config-line)#

server(config-line)#trans

server(config-line)#transport in

server(config-line)#transport input all

server(config-line)#

server(config-line)#

server(config-line)#exit

server(config)#telnet 1.1.1.1 2003

                ^

% Invalid input detected at '^' marker.

server(config)#exit

server#

%SYS-5-CONFIG_I: Configured from console by console


server#telnet 1.1.1.1 2..3

                      ^

% Invalid input detected at '^' marker.

server#telnet 1.1.1.1 2003

Trying 1.1.1.1 ...Open



% Please answer 'yes' or 'no'.

Continue with configuration dialog? [yes/no]: no



Press RETURN to get started!




Router>

Router>

Router>enable

Router#