Error Code Name

2019独角兽企业重金招聘Python工程师标准>>>

file: Core_v4.1.pdf

page:666

data: LIST OF ERROR CODES

错误代码描述

0x00 Success

0x01 Unknown HCI Command

0x02 Unknown Connection Identifier

0x03 Hardware Failure

0x04 Page Timeout

0x05 Authentication Failure

0x06 PIN or Key Missing

0x07 Memory Capacity Exceeded

0x08 Connection Timeout

0x09 Connection Limit Exceeded

0x0A Synchronous Connection Limit To A Device Exceeded

0x0B ACL Connection Already Exists

0x0C Command Disallowed

0x0D Connection Rejected due to Limited Resources

0x0E Connection Rejected Due To Security Reasons

0x0F Connection Rejected due to Unacceptable BD_ADDR

0x10 Connection Accept Timeout Exceeded

0x11 Unsupported Feature or Parameter Value

0x12 Invalid HCI Command Parameters

0x13 Remote User Terminated Connection

0x14 Remote Device Terminated Connection due to Low Resources

0x15 Remote Device Terminated Connection due to Power Off

0x16 Connection Terminated By Local Host

0x17 Repeated Attempts

0x18 Pairing Not Allowed

0x19 Unknown LMP PDU

0x1A Unsupported Remote Feature / Unsupported LMP Feature

0x1B SCO Offset Rejected

0x1C SCO Interval Rejected

0x1D SCO Air Mode Rejected

0x1E Invalid LMP Parameters / Invalid LL Parameters

0x1F Unspecified Error

0x20 Unsupported LMP Parameter Value / Unsupported LL Parameter Value

0x21 Role Change Not Allowed

0x22 LMP Response Timeout / LL Response Timeout

0x23 LMP Error Transaction Collision

0x24 LMP PDU Not Allowed

0x25 Encryption Mode Not Acceptable

0x26 Link Key cannot be Changed

0x27 Requested QoS Not Supported

0x28 Instant Passed

0x29 Pairing With Unit Key Not Supported

0x2A Different Transaction Collision

0x2B Reserved

0x2C QoS Unacceptable Parameter

0x2D QoS Rejected

0x2E Channel Classification Not Supported

0x2F Insufficient Security

0x30 Parameter Out Of Mandatory Range

0x31 Reserved

0x32 Role Switch Pending

0x33 Reserved

0x34 Reserved Slot Violation

0x35 Role Switch Failed

0x36 Extended Inquiry Response Too Large

0x37 Secure Simple Pairing Not Supported By Host

0x38 Host Busy - Pairing

0x39 Connection Rejected due to No Suitable Channel Found

0x3A Controller Busy

0x3B Unacceptable Connection Parameters

0x3C Directed Advertising Timeout

0x3D Connection Terminated due to MIC Failure

0x3E Connection Failed to be Established

0x3F MAC Connection Failed

0x40 Coarse Clock Adjustment Rejected but Will Try to Adjust Using Clock

转载于:https://my.oschina.net/mummy108/blog/412151