SET ANSI_NULLS ON
GO

SET QUOTED_IDENTIFIER ON
GO

 

CREATE PROC [dbo].[P_viewPage_A]
/*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7 QQ:34813284
敬告：适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@TableName VARCHAR(200), --表名
@FieldList VARCHAR(2000), --显示列名，如果是全部字段则为*
@PrimaryKey VARCHAR(100), --单一主键或唯一值键
@Where VARCHAR(2000), --查询条件 不含'where'字符，如id>10 and len(userid)>9
@Order VARCHAR(1000), --排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
--注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
@SortType INT, --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT, --记录总数 0:会返回总记录
@PageSize INT, --每页输出的记录数
@PageIndex INT, --当前页数
@TotalCount INT OUTPUT, --记返回总记录
@TotalPageCount INT OUTPUT --返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')
WHILE CHARINDEX(', ',@Order) > 0 OR CHARINDEX(' ,',@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,', ',',')
SET @Order = REPLACE(@Order,' ,',',')
END
IF ISNULL(@TableName,'') = '' OR ISNULL(@FieldList,'') = ''
OR ISNULL(@PrimaryKey,'') = ''
OR @SortType < 1 OR @SortType >3
OR @RecorderCount < 0 OR @PageSize < 0 OR @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' WHERE '
END
ELSE
BEGIN
SET @new_where1 = ' WHERE ' + @where
SET @new_where2 = ' WHERE ' + @where + ' AND '
END
IF ISNULL(@order,'') = '' OR @SortType = 1 OR @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' ASC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' DESC'
END
IF @SortType = 2
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' DESC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' ASC'
END
END
ELSE
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
END
IF @SortType = 3 AND CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
SET @new_order2 = @Order + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')
SET @FieldList = ',' + @FieldList
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0
BEGIN
SET @FieldList =
@FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = 'SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM ' + @TableName + @new_where1
IF @RecorderCount = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
SELECT @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
SET @PageIndex = CEILING((@TotalCount+0.0)/@PageSize)
END
IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
IF @PageIndex = 1 --返回第一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) --返回最后一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
+ ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1 --仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 2 --仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+' FROM '+ @TableName
+ @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 3 --多列排序，必须包含主键，且放置最后，否则不处理
BEGIN
IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
BEGIN PRINT('ERR_02') RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@TotalCount-@PageSize *@PageIndex+@PageSize) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1 + ' ) AS TMP ' + @new_order1
END
END
END
EXEC(@Sql)

 

GO

 public DataSet GetListByPage(string PstrZhbnum,DateTime PStartTime,DateTime PEndTime, int PiStartIndex, int PiEndIndex)
        {
            DataSet Ads = new DataSet();
            StringBuilder strSql = new StringBuilder();
            strSql.Append("select *  ");
            strSql.Append("from View_jssjzh  ");
            strSql.Append("where zhbnum ='" + PstrZhbnum + "'  ");
            strSql.Append(" and CAST ('"+PStartTime .ToString ()+"' as datetime )<cjsj  ");
            strSql.Append(" and cjsj<CAST ('"+PEndTime .ToString ()+"' as datetime ) ");
            strSql.Append("order by cjsj desc ");

            Ads = DBHelper.Query(strSql.ToString(), PiStartIndex, PiEndIndex);
            return Ads;
        }
 

  /// <summary>
        /// 执行查询语句,返回DATASET
        /// </summary>
        /// <param name="SQLString">SQL语句</param>
        /// <param name="PageStart">从0开始的记录号</param>
        /// <param name="PageEnd">要检索的最大记录数</param>
        /// <returns>DataSet</returns>
        public static DataSet Query(string SQLString, int PageStart, int PageEnd)
        {
            using (SqlConnection connection = new SqlConnection(connectionString))
            {
                DataSet ds = new DataSet();
                try
                {
                    connection.Open();
                    SqlDataAdapter command = new SqlDataAdapter(SQLString, connection);
                    command.Fill(ds, PageStart, PageEnd, "ds");
                    return ds;
                }
                catch (System.Data.SqlClient.SqlException ex)
                {
                    throw ex;
                }
            }
        }

==========第一个是存储过程实现

==========第二个是使用dataset的时候fill方法实现

==========第三个是使用自己构建语句完成

==========第四个是使用合理索引

==========第五个是使用左连接的时候注意左边的稳定性和条件的满足性

左边的稳定性是指左边尽可能的是少量的,条件满足性是指不要出现那种null的，即时处分的条件连接。

        public static DataSet PaginationBySQL(string field, string asc_desc, int pagesize, int start, string sqlText)
        {
            //WITH Data_DataSet AS (  SELECT ROW_NUMBER() OVER  (ORDER BY id desc ) AS Row,*  FROM T_hbxx  aa )
            //上边一句的意思是把这个表先加上一列，这一列是数字。行数字。
            //下边是把这个临时表中的数据提取出来。。。。实际上是执行了两句
            //SELECT * FROM Data_DataSet  WHERE Row between (5-1)* 10+1  and 5*10
            DataSet ds = new DataSet();
            if (field == null)
            {
                field = "id";

            }
            if (asc_desc == null)
            {

                asc_desc = "desc";

            }
            //SqlParameter[] parames = {
            //                       new SqlParameter("@QueryStr",SqlDbType.Char,1000),
            //                       new SqlParameter("@PageSize",SqlDbType.Int),
            //                       new SqlParameter("@PageCurrent",SqlDbType.Int),
            //                       new SqlParameter("@FdShow",SqlDbType.Char,2000),
            //                       new SqlParameter("@IdentityStr",SqlDbType.Char,100),
            //                       new SqlParameter("@WhereStr",SqlDbType.Char,2000),
            //                       new SqlParameter("@FdOrder",SqlDbType.Char,100)
            //                       };
            //parames[0].Value = sqlText;
            //parames[1].Value = pagesize;
            //parames[2].Value = start;
            //parames[3].Value = "";
            //parames[4].Value = field;
            //parames[5].Value = "";
            //parames[6].Value = asc_desc;

            /解决的是关于2000的问题
            //string proce = "page";
            //这里有个问题就是关于如何解决
            return data_chuli.get_page_shujufromye(field, asc_desc, pagesize, start, sqlText);
            //return data_chuli.GetMoreRow(string.Format("WITH Data_DataSet AS (  SELECT ROW_NUMBER() OVER  (ORDER BY " + field + "   " + asc_desc + " ) AS Row, *  FROM ( " + sqlText + " ) aa ) SELECT * FROM Data_DataSet  WHERE Row between ({0}-1)* {1}+1  and {0}*{1}", start, pagesize));
            //ds = data_chuli.getdataset(proce, parames);
            //return ds;
        }
        public static DataSet get_page_shujufromye(string field, string asc_desc, int pagesize, int start, string sqlText)
        {
            DataSet ds = new DataSet();
            string sql_yong = "";
            if (asc_desc == "asc")
            {
                if (start == 1)
                {

                    sql_yong = "select  top " + pagesize.ToString() + " *  from (" + sqlText + ") as t where 1=1 order by " + field + "";


                }
                else
                {
                    string sql_top = "select top " + (pagesize * start).ToString() + " * from (" + sqlText + ") as h ";

                    sql_yong = "select  top " + pagesize.ToString() + " *  from (" + sqlText + ") as t where " + field + ">(select max(" + field + ") from (select top " + (pagesize * (start - 1)).ToString() + " * from (" + sqlText + ") as g order by " + field + ") as h ) order by " + field + "";
 
                }
            }
            if (asc_desc == "desc")
            {

                if (start == 1)
                {

                    sql_yong = "select  top " + pagesize.ToString() + " *  from (" + sqlText + ") as t where 1=1 order by " + field + " desc ";


                }
                else
                {
                    //string sql_top = "select top " + (pagesize * start).ToString() + " * from (" + sqlText + ") as h order by id desc";

                    sql_yong = "select  top " + pagesize.ToString() + " *  from (" + sqlText + ") as t where " + field + "<(select min(" + field + ") from (select top " + (pagesize * (start - 1)).ToString() + " * from (" + sqlText + ") as g order by " + field + " desc ) as h ) order by " + field + " desc";

                    //
                    //

                }
           
           
           
           
            }
            ds = data_chuli.GetMoreRow(sql_yong);

            return ds;
        }