很简单的一个实验，相信大虾们看下配置就明白，就不写说明了！
下面是配置
Switch#show run
Building configuration...

Current configuration : 1107 bytes
!
version 12.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Switch
!
!
!
interface FastEthernet0/1
 switchport access vlan 2
!
interface FastEthernet0/2
 switchport access vlan 3
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
 switchport mode trunk
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface Vlan1
 ip address 192.168.1.1 255.255.255.0
 shutdown
!
!
line con 0
!
line vty 0 4
 login
line vty 5 15
 login
!
!
end


Switch#    
最后还是简单的的说明一下吧，交换机为思科的2950  两个vlan，不能互访，但都可以访问服务器，设置24端口为公共端口，管理地址192.168.1.1。