keepalived + redis 主备容灾部署

最新推荐文章于 2022-05-30 09:55:30 发布
最新推荐文章于 2022-05-30 09:55:30 发布
阅读量134 收藏
点赞数
文章标签： 数据库 开发工具
原文链接：https://my.oschina.net/mjRao/blog/734129
版权

为什么80%的码农都做不了架构师？>>>   hot3.png

方案图

方案部署

现网环境中有两个数据库主机，master， 和slave。以及一个vip

Master： 192.168.11.149

Slave：192.168.11.150

Vip：192.168.200.200

节点A Redis-Master 主节点，节点B Redis-Slave 备用节点，虚拟IP是对外提供访问的IP。虚拟IP在某个时刻只能属于某一个节点，另一个节点作为备用节点存在。当主节点不可用时，备用节点接管虚拟IP，提供正常服务。

安装redis

redis master安装

下载redis-3.0.3.tar.gz 创建redis 账户

#useradd  -d /home/cin_redis –s /bin/bash –m cin_redis
# passwd cin_redis

上传redis-3.0.3.tar.gz 解压

# tar –xzvf redis-3.0.3.tar.gz
#cd rediis-3.0.3/src
#mak MALLOC=libc
#make PREFIX=$HOME install

在redis的解压目录下有一个redis.conf 文件，编辑redis.conf文件

daemonize yes	后台模式运行
port 15093		端口
logfile “/home/cin_redis/redis-15093.log”
pidfile “/home/cin_redis/redis-15093.pid”

可以把该配置文件拷贝到bin目录下修改；启动redis

# redis-server redis.conf

redis slave 安装

redis slave机器上同样安装redis 数据库，安装步骤同2.1安装，修改redis.conf 文件

daemonize yes	后台模式运行
port 15093		端口
logfile “/home/cin_redis/redis-15093.log”
pidfile “/home/cin_redis/redis-15093.pid”

slaveof 192.168.11.149 15093

可以把该配置文件拷贝到bin目录下修改；启动redis

#redis-server redis.conf

用redis-cli 客户端连接redis-master数据库，查看replication

redis master信息

用redis-cli客户端连接redis-slave数据库，查看replication

redis slave信息

安装keepalived

下载keepalived-1.2.23（https://codeload.github.com/acassen/keepalived/tar.gz/v1.2.23） 创建keepalived 账户

#useradd –m keepalived –d /home/keepalived –s /bin/bash
#passwd keepalived

上传keepalived-1.2.23.tar.gz

#tar –xzvf keepalived-1.2.23.tar.gz
#cd keepalived-1.2.23
#./configure –prefix=$HOME/keepalive
# make &make install
# cp  -r  /home/keepalived/keepalive/etc/keepalived  /etc 
# cp  /home/keepalived/keepalive/etc/rc.d/init.d/keepalived  /etc/rc.d/init.d
#cp /home/keepalived/keepalive/etc/sysconfig/keepalived  /etc/sysconfig
#ln –s /home/keepalived/keepalive/sbin/keepalived  /usr/sbin/
#chkconfig –add keepalived

按照以上步骤分别在redis-master 和 redis-slave 主机上安装keepalived工具

配置keepalived

redis master 配置

按照上面的步骤安装完keepalived，vim 打开/etc/keepalived下面的keepalived.conf 文件配置

! Configuration File for keepalived

vrrp_script chk_redis {
    script "/etc/keepalived/scripts/redis_check.sh"
    interval 2
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.200.200
    }
    track_script {
        chk_redis
    }
    notify_master "/etc/keepalived/scripts/redis_master.sh"
    notify_backup "/etc/keepalived/scripts/redis_backup.sh"
    notify_fault  "/etc/keepalived/scripts/redis_fault.sh"
    notify_stop   "/etc/keepalived/scripts/redis_stop.sh"
}

在/etc/keepalived 目录下创建scripts，

#cd /etc/keepalived/scripts
#touch redis_master.sh
#touch redis_backup.sh
#touch redis_fault.sh]
#touch redis_stop.sh
#touch redis_check.sh

redis_master.sh : 当keepalived切换成master时，会触发执行此脚本

redis_backuo.sh : 当keepalived 切换成slave时，会触发执行此脚本

redis_fault.sh : 当keepalived 出错时，会触发执行此脚本

redis_stop.sh : 当keepalived 停止时，会触发执行次脚本

redis_check.sh : keepalived定时调用此脚本检测redis 数据库是否连接正常

redis_master.sh文件内容：

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.149"
REMOTEIP="192.168.11.150"
PORT="15093"

echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Beging master..." >> $LOGFILE 2>&1
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PORT SLAVEOF $REMOTEIP $PORT >> $LOGFILE 2>&1
sleep 10
echo "Run SLAVEOF NO ONE cmd..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PORT SLAVEOF NO ONE >> $LOGFILE 2>&1

redis_backup.sh文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.149"
REMOTEIP="192.168.11.150"
PORT="15093"

echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Beging slave..." >> $LOGFILE 2>&1
sleep 15
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PROT  SLAVEOF $REMOTEIP $PORT >> $LOGFILE 2>&1

redis_fault.sh 文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.149"
REMOTEIP="192.168.11.150"
PORT="15093"

echo "[ERROR]-----keepalived is fault,change local redis to slave-----" >> $LOGFILE
date >> $LOGFILE
echo "Beging slave..." >> $LOGFILE 2>&1
sleep 10
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PORT SLAVEOF $REMOTEIP $PORT >> $LOGFILE 2>&1

redis_stop.sh 文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.149"
REMOTEIP="192.168.11.150"
PORT="15093"

echo "[ERROR]-----keepalived is stop,change local redis to slave-----" >> $LOGFILE
date >> $LOGFILE
echo "Beging slave..." >> $LOGFILE 2>&1
sleep 10
echo "Run SLAVEOF cmd ..." >> $LOGFILE

$REDISCLI -h $LOCALIP -p $PORT SLAVEOF $REMOTEIP $PORT >> $LOGFILE 2>&1

redis_check.sh 文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.149"
REMOTEIP="192.168.11.150"
PORT="15093"

ALIVE=`$REDISCLI -h $LOCALIP -p $PORT PING`

if [ "$ALIVE" == "PONG" ];then
   echo "[INFO] `date +'%Y-%m-%d:%H:%M:%S'` :$LOCALIP local redis is health." >> $LOGFILE
   exit 0
else
   service keepalived stop
   echo "[ERROR] `date +'%Y-%m-%d:%H:%M:%S'` :$LOCALIP local redis is not health." >> $LOGFILE
   exit 1
fi

redis slave 配置

按照上面的步骤安装完keepalived，vim 打开/etc/keepalived下面的keepalived.conf 文件配置

! Configuration File for keepalived

vrrp_script chk_redis {
    script "/etc/keepalived/scripts/redis_check.sh"
    interval 2
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.200.200
    }
    track_script {
        chk_redis
    }
    notify_master /etc/keepalived/scripts/redis_master.sh
    notify_backup /etc/keepalived/scripts/redis_backup.sh
    notify_fault  /etc/keepalived/scripts/redis_fault.sh
    notify_stop   /etc/keepalived/scripts/redis_stop.sh
}

在/etc/keepalived 目录下创建scripts，

#cd /etc/keepalived/scripts
#touch redis_master.sh
#touch redis_backup.sh
#touch redis_fault.sh
#touch redis_stop.sh
#touch redis_check.sh

redis_master.sh : 当keepalived切换成master时，会触发执行此脚本

redis_backuo.sh : 当keepalived 切换成slave时，会触发执行此脚本

redis_fault.sh : 当keepalived 出错时，会触发执行此脚本

redis_stop.sh : 当keepalived 停止时，会触发执行次脚本

redis_check.sh : keepalived定时调用此脚本检测redis 数据库是否连接正常

redis_master.sh 文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.150"
REMOTEIP="192.168.11.149"
PORT="15093"

echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Beging master..." >> $LOGFILE 2>&1
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PORT SLAVEOF $REMOTEIP $PORT >> $LOGFILE 2>&1
sleep 10
echo "Run SLAVEOF NO ONE cmd..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PORT SLAVEOF NO ONE >> $LOGFILE 2>&1

redis_backup.sh 文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.150"
REMOTEIP="192.168.11.149"
PORT="15093"

echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Beging slave..." >> $LOGFILE 2>&1
sleep 15
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PORT SLAVEOF $REMOTEIP $PORT >> $LOGFILE 2>&1

redis_fault.sh 文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.150"
REMOTEIP="192.168.11.149"
PORT="15093"

echo "[ERROR]-----keepalived is fault,change local redis to slave-----" >> $LOGFILE
date >> $LOGFILE
echo "Beging slave..." >> $LOGFILE 2>&1
sleep 10
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PORT SLAVEOF $REMOTEIP $PORT >> $LOGFILE 2>&1

redis_stop.sh 文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.150"
REMOTEIP="192.168.11.149"
PORT="15093"

echo "[ERROR]-----keepalived is stop,change local redis to slave-----" >> $LOGFILE
date >> $LOGFILE
echo "Beging slave..." >> $LOGFILE 2>&1
sleep 10
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI -h $LOCALIP -p $PORT SLAVEOF $REMOTEIP $PORT >> $LOGFILE 2>&1

redis_check.sh 文件内容

#!/bin/bash

KPATH=/home/keepalived
RPATH=/home/cin_redis

REDISCLI=$RPATH/bin/redis-cli

LOGFILE=$KPATH/log/keepalived-redis-state.log

LOCALIP="192.168.11.150"
REMOTEIP="192.168.11.149"
PORT="15093"

ALIVE=`$REDISCLI -h $LOCALIP -p $PORT PING`

if [ "$ALIVE" == "PONG" ];then
   echo "[INFO] `date +'%Y-%m-%d:%H:%M:%S'` :$LOCALIP local redis is health." >> $LOGFILE
   exit 0
else
   service keepalived stop
   echo "[ERROR] `date +'%Y-%m-%d:%H:%M:%S'` :$LOCALIP local redis is not health." >> $LOGFILE
   exit 1
fi

转载于:https://my.oschina.net/mjRao/blog/734129

weixin_34301307
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
企业自建私有云-openstack-负载keepalive+haproxy(容灾节点)
qq_39122260的博客
04-25 2087
安装keepalived容灾节点 安装 yum install -y keepalived 修改keepalived配置文件容灾节点 vi /etc/keepalived/keepalived.conf ! Configuration File for keepalived global_defs { router_id LVS_OPENSTACK vrrp_iptables } vrrp_instance VI_1 { state MASTER(BACKUP) in
nginx+keepalived实现双机主备容灾
liu1160848595的博客
03-04 3977
双机房容灾是指服务器部署在不同的机房，这样可以在一个机房出故障之后，可以使用另外一个机房的服务，以达到服务高可用的目的。 现在很多多个服务器容灾的解决方案是用的nginx+keepalived，nginx用来反向代理以及负载均衡，keepalived用来监测nginx服务状态，一旦有nginx服务宕机，另一台服务器会自动接管请求，达到服务的高可用目的。 keepalived简单介绍： keepal...
应用keepalived主从容灾
weixin_30515513的博客
06-19 174
一。 简单介绍keepalived keepalived提供基于linux高可用性负载均衡技术，基于VRRP协议（虚拟路由冗余协议(Virtual Router Redundancy Protocol，简称VRRP)）主要 用于主从结构提供服务 主从机器 必须安装keepalived 主机器 会默认给主机设置一个虚拟ip 同时将该虚拟ip和主机器的ma...
系统容灾实验-Keepalived+LVS+Nginx+Web搭建企业级Web应用
陈全伟的博客
10-09 625
项目一 文章目录​​​ 目录 项目一 文章目录​​​ 前言 一、项目概述 二、项目目的 三、操作步骤 1.环境准备 2.创建虚拟机 3.配置网络及修改虚拟机名称 4.配置LVS_keepalived1、LVS_keepalived2 五.配置Nginx1、Nginx2 ​ 六.配置Web1、Web2 ​ 七.启动LVS_keepalived1和LVS_keepalived2 八.反向配置Nginx1、Nginx1 ​ 九.进行验证 总结 前言 个人制作.
keepalived实现redis主备切换
weixin_33869377的博客
11-15 153
试验目标： 1：主redis发生故障时，从redis自动切换为主redis。 2：主redis恢复正常后，自动降级为从redis。 试验环境： 主redis：192.168.189.138 从redis：192.168.189.131 VIP：192.168.189.123 主从redis均安装了keep...
keepalived_redis_nginx：keepalived + redis + nginx部署示例
02-05
keepalived + redis + nginx部署示例 操作系统：Centos7.5 主IP：10.211.55.5 从IP：10.211.55.6 VIP：10.211.55.10 保持安装 yum -y install libnl libnl-devel libnfnetlink-devel openssl-devel net-tools ...
keepalived + redis 实现双机热备
04-23
- **主备切换**：通过 keepalived 监控 redis 主服务器的状态，一旦检测到主服务器出现故障，可以快速将流量切换到备份服务器，保证服务不间断。 - **负载均衡**：在多个 redis 实例之间分配请求，提升系统处理能力...
Keepalived+redis高可用主从-Keepalived的配置
01-07
Keepalived+redis高可用主从，本技术文档主要是Keepalived的配置，redis主从配置可以看我的文章https://blog.csdn.net/qq_41709494/article/details/116382183
keepalived+redis高可用主备配置文件和脚本
07-28
在构建高可用性(HA)系统时，`keepalived`和`redis`的结合使用是一种常见的解决方案...综上所述，`keepalived+redis`组合可以构建一个高效且高可用的系统，通过合理的配置和监控，可以极大地提高服务的稳定性和可靠性。
keepalived+redis&mysql主备高可用配置文件和脚本
07-28
"keepalived+redis&mysql主备高可用配置文件和脚本"的实现涉及多个层面的配置，包括数据库的主从复制设置、Keepalived的VRRP配置、监控脚本编写等。通过合理配置，可以构建出高可用的数据库系统，保证在主服务器故障...
部署Redis+Keepalived高可用环境
m0_60379130的博客
03-03 616
192.168.150.15 elk-node01 192.168.150.16 elk-node02 192.168.150.17 elk-node03 安装redis服务 以下操作分别在node01、node02上安装redis服务： #yum install redis -y 安装不上的请先配置epel扩展源。 修改主从配置： # vim /etc/redis.conf 更改如下： bind 0.0.0.0 //或者直接写自己的IP地址 daemonize yes //守护进程...
测试redis+keepalived实现简单的主备切换
Try My Best 尽力而为
07-17 358
keepalived是一个是集群管理中保证集群高可用的一个服务软件，它具备心跳检测的功能。运用在redis上，则是具备主备切换的控制功能。 keepalived的主备切换方案的设计思想如下： 当 Master 与 Slave 均运作正常时, Master负责服务，Slave负责Standby；  当 Master 挂掉，Slave 正常时, Slave接管服务，同时关闭主从复制功能； ...
keepalived容灾方案，实现nginx负载均衡主从架构（1）
aoxu4895的博客
09-11 325
一：环境准备：4台nginx服务器，两台用yum安装，两台使用源码安装 第一步：使用yum安装nginx服务器，在浏览器输入ip，可以显示以下内容，这步比较简单，安装好修改/usr/share/nginx/html/index.html就可以显示了： 第二步：使用源码部署nginx,操作步骤如下所示 ~:$ yum -y install pcre-devel zlib-devel ~:...
redis高可用：keepalived+redis主从部署
热门推荐
隙光
08-11 1万+
Redis主从+Keepalived
使用keepalived实现Redis双机热备、高可用
覃冠日的博客
04-11 7191
Redis高可用需求(1)Redis运行在docker容器中;（2）实现双机热备,当redis-master异常时，redis-slave快速切换成master提供服务。 (3)当redis-master数据更新时，redis-slave数据能同步更新。解决方案利用keepalived实现redis的高可用。keepalived利用shell脚本，定期检测redis服务是否正常。当redis服务异
keepalived 搭建 redis主从
KillerXie的博客
11-10 232
一、keepalived 的安装 #版本自己选定 wget http://www.keepalived.org/software/keepalived-1.4.0.tar.gz tar -zvxf keepalived-1.4.0.tar.gz cd keepalived-1.4.0 #指定一下安装的目录 ./configure --prefix=/usr/local/keepalived #编译安装 make && make install 二、配置 1.抢占式 主机 linux-ea
redis集群-keepalived+redis
weixin_43268590的博客
05-30 1326
redis主安装在公网IP为x.x.x.x，内网为x1.x1.x1.x1的服务器上。redis从安装在公网IP为y.y.y.y，内网为y1.y1.y1.y1的服务器上。虚拟IP为z.z.z.z
一、keepalived + redis高可用主备
linhan007的专栏
07-28 1044
前提： centos7，所有操作在root用户下进行 Redis server 版本 6.2.4 一、rpm安标题装keepalived rpm -ivh mysql-community-common-5.7.9-1.el7.x86_64.rpm rpm -ivh mysql-community-libs-5.7.9-1.el7.x86_64.rpm rpm -ivh mysql-community-libs-compat-5.7.22-1.el7.x86_64.rpm rpm -ivh net-s
keepalived和redis主从方案
小伙的博客
02-28 363
实现切换逻辑： redis 主和 redis从  正常同步； redis主keepalived 启动，执行redis_master.sh脚本，vip在自己身上； redis 从keepalived 启动，执行redis_slave.sh脚本； redis主服务关闭，则redis主执行redis_fault.sh脚本， vip落在redis 从上，redis从执行redis_master.s
keepalived+LVS主和备部署
最新发布
09-08
对于keepalived和LVS的主备部署，你可以按照以下步骤进行设置： 1. 首先，确保你的服务器上已经安装了keepalived和LVS软件包。在大多数Linux发行版中，你可以通过包管理器进行安装。 2. 在主服务器上配置...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值