在Suse12(sp2)平台安装Oracle12c

最新推荐文章于 2024-05-24 15:53:52 发布

weixin_34306446

最新推荐文章于 2024-05-24 15:53:52 发布

阅读量1.8k

点赞数

文章标签：数据库 python 操作系统

原文链接：https://my.oschina.net/rootliu/blog/1524753

版权

2019独角兽企业重金招聘Python工程师标准>>>

第一步，安装VirtualBox

安装完系统后分辨率不合适如何修改

安装完Suse12进入图形界面后会出现分辨率锁定为640*480，使用yast2无法修改，同时使用xrandr命令无法修改分辨率，图形界面如下图：

Xrandr命令输出如下：

修改文件/boot/grub2/grub.cfg ，在133行左右，图中位置添加 vga=0x365，保存后推出，重启可将系统分辨率修改为1440*900。

启动VNC服务。

SSH登录后，执行vncserver命令（或/usr/local/vnc # ./vncserver ）

提示：You will require a password to access your desktops.

设置远程访问的密码。（文件路径在/usr/local/vnc/vncpasswd）

Password：（输入密码）

Verify：（再次输入）

提示：Would you like to enter a view-only password （y/n）？ n（是否输入一个只能查看的密码，选择否）

提示信息如下：

xauth： creating new authority file /root/.Xauthority

New 'X' desktop is -eyh7：2（桌面编号为2）

Creating default startup script /root/.vnc/xstartup

Starting applications specified in /root/.vnc/xstartup

Log file is /root/.vnc/-eyh7：2.log

设置完毕后重新启动服务器。

windows vnc客户端软件。

运行VNC查看器，输入的IP和桌面编号：

如：192.168.75.130：1 而后输入VNC连接密码就可以登录进去了。

安装Oracle Database 12c

Configuring Servers for Oracle Database

This section describes the following operating system tasks you must complete before
you install Oracle Database:
■ Checking Server Hardware and Memory Configuration
■ General Server Minimum Requirements
■ Server Storage Minimum Requirements
■ Server Memory Minimum Requirements
3.1 Checking Server Hardware and Memory Configuration
Run the following commands to check your current system information:
1. To determine the physical RAM size, enter the following command:
# grep MemTotal /proc/meminfo
If the size of the physical RAM installed in the system is less than the required
size, then you must install more memory before continuing.
2. To determine the size of the configured swap space, enter the following command:
# grep SwapTotal /proc/meminfo
If necessary, see your operating system documentation for information about how
to configure additional swap space.
3. To determine the amount of space available in the /tmp directory, enter the
following command:
# df -h /tmp

4. To determine the amount of free disk space on the system, enter the following
command:
# df -h

5. To determine the amount of free RAM and disk swap space on the system, enter
the following command:
# free

6. To determine if the system architecture can run the software, enter the following
command:
# uname -m

Verify that the processor architecture matches the Oracle software release to install.
For example, you should see the following for a x86-64 bit system:
x86_64
If you do not see the expected output, then you cannot install the software on this
system.