1.登陆设备 输入show license udi  

记录到PID, SN,UDI信息

2.访问思科网站https://tools.cisco.com/SWIFT/LicensingUI/Quickstart#. 输入上述信息及购买的PAK号

3.将从思科获取到的License .lic文件导入设备中

tftp上传.lic文件

Example:

Router#copy tftp flash: 

Address or name of remote host [ ]? 10.0.0.1 

Source filename [ ]? uck9_license.lic 

Destination filename [uck9_license.lic]? 

Accessing tftp://172.20.244.138/uck9_license.lic... 

Loading uck9_license.lic from 172.20.244.138 (via GigabitEthernet1/0/1): ! 

[OK - 1161 bytes] 

安装.lic文件

Note: while the show flash: command now lists the file in the flash, it has not yet been installed.  The license install command must be used to install the license.  

Example:

Router#license install flash:uck9_license.lic

Installing licenses from "flash:uck9_license.lic" 

Installing...Feature:uck9...Successful:Supported

1/1 licenses were successfully installed

0/1 licenses were existing licenses

0/1 licenses were failed to install

reload重启设备，enable许可 show ver 查看授权