# fdisk -l
Disk /dev/vdb: 53.7 GB, 53687091200 bytes
16 heads, 63 sectors/track, 104025 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
# fdisk /dev/vdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel with disk identifier 0xb5f18769. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help):
Command (m for help): n // 输入n新建一个分区 Command action e extended //e是扩展分区 p primary partition (1-4) //p是主分区 p //选择p Partition number (1-4): 1 //分区号 First cylinder (1-104025, default 1): //默认回车就行 Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-104025, default 104025): 25600M //可以输入具体要分多少空间给这个分区,这里我分25G 参考: //Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte) 2^N: K (KibiByte), M (MebiByte), G (GibiByte)
Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (52015-104025, default 52015): Using default value 52015 Last cylinder, +cylinders or +size{K,M,G} (52015-104025, default 104025): //这里直接回车默认所有空间 Using default value 104025
Command (m for help): p //输入p查看分区 Disk /dev/vdb: 53.7 GB, 53687091200 bytes 16 heads, 63 sectors/track, 104025 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb7a8f045 Device Boot Start End Blocks Id System /dev/vdb1 1 52014 26215024+ 83 Linux /dev/vdb2 52015 104025 26213544 83 Linux
Command (m for help): w //输入w保存退出 The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
# fdisk -l Disk /dev/vdb: 53.7 GB, 53687091200 bytes 16 heads, 63 sectors/track, 104025 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb7a8f045 Device Boot Start End Blocks Id System /dev/vdb1 1 52014 26215024+ 83 Linux /dev/vdb2 52015 104025 26213544 83 Linux
# mkfs.ext3 /dev/vdb1
# mkfs.ext3 /dev/vdb2
# mkdir /vdb1 /vdb2
# mount /dev/vdb1 /vdb1 # mount /dev/vdb2 /vdb2
# vim /etc/fstab tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/vdb1 /vdb1 ext3 defaults 1 2 /dev/vdb2 /vdb2 ext3 defaults 1 2
[root@myslaver ~]# cat /proc/partitions major minor #blocks name 252 0 52428800 vda 252 1 512000 vda1 252 2 7875584 vda2 252 16 52428800 vdb 252 17 26215024 vdb1 252 18 26213544 vdb2 253 0 7036928 dm-0 253 1 835584 dm-1
转载于:https://blog.51cto.com/kurolz/1873063